Isolated Analog Voltage Output Data Output Modules
from Dataforth Corporation
Each DSCA39 current output module provides a single channel of analog output. The input signal is buffered, isolated, filtered and converted to a unipolar or bipolar current output. Signal filtering is accomplished with a five-pole filter which provides 100dB per decade of attenuation above 1kHz. An... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 1
- Form Factor: DIN Rail
- Accuracy: 0.0300
from Gefran
R-D/A4, R-D/A8, R-D/A16 are modules with 4, 8, 16 optically isolated analog outputs (16bit ±10V) that send reference signals to drives, servocontrols, power solid state relays with linear input, or retransmit variables to recording devices / other units, etc. The maximum current for each... [See More]
- Isolation: Isolated Analog Voltage Output
- Resolution: 16
- Form Factor: Modular Bay or Slot System
- Outputs: Analog Voltage Output; Analog Current Output
from Moxa Inc.
Resolution in Ranges. 12 bits, 3.91 µA/bit. Output Current Range. 4 to 20 mA. Data Format. 16-bit integer (2 ’s complement). Accuracy. • ±0.1%, FSR @ 25 °C. • ±0.3%, FSR @ 0 °C, 60 °C. Output Impedance. Max. 500 ohms. Conversion Time. 2 ms for all... [See More]
- Isolation: Isolated Analog Voltage Output
- Resolution: 12
- Form Factor: Modular Bay or Slot System
- Outputs: Analog Current Output
from Opto 22
The SNAP-AOV-25 provides two channels of analog voltage output at a nominal range of 0-10 volts. Each channel can supply +5 mA of load current. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. The... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 2
- Form Factor: Modular Bay or Slot System
- Resolution: 12
from OMEGA Engineering, Inc.
The DRA-ACT-4I AND DRA-ACT-4V Series are isolated 4-wire ac current and ac voltage input DIN rail mount signal conditioners that convert the measured input into a proportional, linear and highly accurate 4-20 mA output current. The DRA-ACT-4I Series of ac current input models includes models for 0-1... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 2
- Form Factor: DIN Rail
- Accuracy: 0.1000
from Acromag, Inc.
12-bit DAC. 16 channels voltage outputs. Wide temperature range. PCIe bus interface. The AP220 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Each output... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 16
- Form Factor: PC Board
- Resolution: 12
from Apix, Inc.
DESCRIPTION. The ISODAQ SPi Series Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with. 3000 Vrms between Input, Power, SPi serial link and 2000 Vrms Channel-to-Channel. These ar [See More]
- Isolation: Isolated Digital Outputs; Isolated Analog Voltage Output; Channel-to-Channel Isolation
- Analog Channels: 8
- Form Factor: Module
- Digital I/O Channels: 8
from Moxa Inc.
Resolution in Ranges. 12 bits, 2.44 mV/bit. Output Current Range. 0 to 10 VDC. Data Format. 16-bit integer (2 ’s complement). Accuracy. • ±0.1%, FSR @ 25 °C. • ±0.3%, FSR @ 0 °C, 60 °C. Output Impedance. Max. 5K ohms. Conversion Time. 2 ms for all channels [See More]
- Isolation: Isolated Analog Voltage Output
- Resolution: 12
- Form Factor: Modular Bay or Slot System
- Outputs: Analog Voltage Output
from Opto 22
The SNAP-AOV-27 provides two channels of analog voltage output at a nominal range of -10 to +10 volts. Each channel can supply -5 or +5 mA of load current. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 2
- Form Factor: Modular Bay or Slot System
- Resolution: 12
from OMEGA Engineering, Inc.
The DRA-ACT-SI AND DRA- ACT-SV Series are self-powered ac current and ac voltage input DIN rail mount signal conditioners that use the measured input to produce an accurate and linear output current. These signal conditioners have excellent accuracy, linearity and stability which make them unique. [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 2
- Form Factor: DIN Rail
- Accuracy: 0.1000
from Acromag, Inc.
16-bit DAC. 16 channel voltage output. Wide temperature range. PCIe bus interface. The AP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Each output... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 16
- Form Factor: PC Board
- Resolution: 16
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Isolation: Isolated Digital Outputs; Isolated Analog Voltage Output; Channel-to-Channel Isolation
- Analog Channels: 8
- Form Factor: DIN Rail
- Digital I/O Channels: 32
from Opto 22
0 To +5 VDC Output [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 1
- Form Factor: Modular Bay or Slot System
- Resolution: 12
from OMEGA Engineering, Inc.
The D3000 and D4000 computer-to-analog output interfaces are designed to be mounted remotely from a host computer and communicate with standard RS-232 and RS-485 serial ports. Simple ASCII commands are used to control a 12-bit digital-to-analog converter that is scaled to provide commonly used... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 1
- Form Factor: DIN Rail
- Digital I/O Channels: 1
from Opto 22
0 To +10 VDC Output [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 1
- Form Factor: Modular Bay or Slot System
- Resolution: 12
from OMEGA Engineering, Inc.
The CCT series DIN rail signal conditioners are designed to accept a broad range of input signals, such as ac and dc voltage and current, frequency, temperature (thermocouple and RTD), and process transducers, and provide standard process outputs of either 0/4 to 20 mA, or 0 to 10 Vdc. The CCT... [See More]
- Isolation: Isolated Analog Voltage Output
- Analog Channels: 1
- Form Factor: DIN Rail
- Accuracy: 0.3000