Isolated Digital Output Data Output Modules
from Yaskawa America, Inc. - Motion Division
Features. Easy Web Insterface. Every VIPA SLIO E/IP and Modbus TCP Fieldbus module has a web interface for displaying diagnostic information and status of attached modules. A simple connection of your network allows remote access to your VIPA SLIO modules. High Speed Backpland Bus. Achieve reaction... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 2
- Form Factor: Modular Bay or Slot System
- Host Connection: Ethernet
from Advantech
16-ch Isolated Digital Input and 16-ch Isolated Digital Output EtherCAT Remote I/O Module. Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current... [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Analog Voltage Output
- Form Factor: DIN Rail; DIN-rail
- Operating Temperature: -4 to 140
from Dataforth Corporation
Description. The MAQ20-DORLY20 module has 20 isolated SPST latching relay output channels that can switch between 2A at 30V and 0.4A at 150V. Each channel has contact state readback to verify the physical output state. Relays can be controlled individually or in blocks and have user configurable... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 20
- Form Factor: DIN Rail
- Outputs: Relay Output
from Advantech
16-ch Isolated Digital Input and 16-ch Isolated Digital Output EtherCAT Remote I/O Module. Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current... [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Analog Voltage Output
- Form Factor: DIN Rail; DIN-rail
- Operating Temperature: -4 to 140
from Dataforth Corporation
The SCMD digital relay output modules are used for switching AC and DC loads such as relays, solenoids, motor starters, or indicator lamps. All models provide up to 1000Vrms of optical isolation between the field device and the control logic. Functionality is denoted by case color —relay... [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Analog Voltage Output
- Form Factor: Plug into backpanel
- User Interface: None
from Advantech
16-ch Source-type Isolated Digital Output Module with LED. Optical Isolation: 2500 Vdc. Over Voltage Protection: 70 Vdc. Power Consumption: 0.6 W (max.). 16-channel [See More]
- Isolation: Isolated Digital Outputs
from ACCES I/O Products, Inc.
Features. 16, 32, or 48 individually optically isolated solid-state outputs. Solid-state design permits high-speed switching and long-life expectancy. Wide 5V to 60 VDC output range. Optically isolated channel to channel and channel to ground. On-Card shields prevent accidental contact with user... [See More]
- Isolation: Isolated Digital Outputs; Channel-to-Channel Isolation; Channel to Ground
- Analog Channels: 48
- Form Factor: PC Board
- Outputs: Analog Voltage Output
from Measurement Computing
KEY HIGHLIGHTS. Serial interface data acquisition (DAQ) devices with up to eight temperature/ voltage inputs, up to four voltage/current outputs, two 32-bit counters, up to 16 digital input, open collector outputs, and up to 7 relays. [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 13
- Form Factor: Stand-alone
- Outputs: Analog Current Output
from Opto 22
Opto 22 ’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off. This AC output module is... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 2
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output
from Apix, Inc.
DESCRIPTION. The ISODAQ SPi Series Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with. 3000 Vrms between Input, Power, SPi serial link and 2000 Vrms Channel-to-Channel. These ar [See More]
- Isolation: Isolated Digital Outputs; Isolated Analog Voltage Output; Channel-to-Channel Isolation
- Analog Channels: 8
- Form Factor: Module
- Digital I/O Channels: 8
from Gefran
The R-U16 module has 8 optically isolated digital outputs, type PNP, 24 VDC-3A, and can be used to send signals and OKs to electronic devices, directly power loads in VDC within the limits of rated currents, or control loads of any kind via solid state relay, contactors, etc. The outputs have the... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 16
- Form Factor: Modular Bay or Slot System
- Outputs: Analog Voltage Output; Analog Current Output; Relay Output
from American Portwell Technology Inc.
Independent Common Reed Relay Contact-point Digital Output Board for PCI [See More]
- Isolation: Isolated Digital Outputs; Relay-Isolation
- Digital I/O Channels: 16
- Form Factor: PC Board
- Outputs: Reed Relay; Relay Output
from Acromag, Inc.
32 port-isolated output channels (bipolar solid state relays). ±60V AC/DC output. High/low-side switch configuration. IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices. A major IP445A advantage is its flexibility. The module supports wide range... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 32
- Form Factor: PC Board
- User Interface: Computer Programmable
from Moxa Inc.
Outputs per Module. 4 channels, relay. Relay Type. • Form A, Normally Open (N.O.). • Single Pole, Single Throw (SPST). Off-State Leakage Current. Max. 1.5 mA. Output Current Rating. At rated power. • 2 A @ 5 to 28.8 VDC. • 0.8 A @ 48 VDC. • 0.5 A @ 110 VDC. • 2 A @ 250... [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Relay Output
- Form Factor: Modular Bay or Slot System
- User Interface: Computer Programmable
from WINSYSTEMS, INC.
WinSystems ’ ISM-TRM-ISO-OUT provides 24 lines of optically isolated outputs to provide easy connection and signal conditioning from field wiring. The board is needed for applications requiring signal isolation between an embedded computer and monitoring control points. Optical isolation... [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Analog Voltage Output
- Form Factor: PC Board
- Host Connection: Direct Backplane Interface
from OMEGA Engineering, Inc.
The OME-DB-24C has 24 channels of optically isolated digital outputs, arranged into four isolated banks. Each digital output offers a darlington transistor and integral suppression diode for inductive load. The board interfaces to field logic signals, eliminating ground-loop problems and isolating... [See More]
- Isolation: Isolated Digital Outputs
- Analog Channels: 24
- Form Factor: PC Board
- Outputs: NPN; Analog Current Output
from ACCES I/O Products, Inc.
The USB-AO-ARB1 is an ideal solution for adding portable, easy-to-install high-speed analog output capabilities to any computer with a USB 2.0 port. The USB-AO-ARB1 is a USB 2.0 High-Speed device and is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB... [See More]
- Isolation: Isolated Digital Outputs
- Analog Channels: 2
- Form Factor: PC Board
- Resolution: 16
from Opto 22
Opto 22 ’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off. This AC output module is... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 2
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. They are fully isolated with 3000 Vrms between Input, Power,. RS-485 ser [See More]
- Isolation: Isolated Digital Outputs; Channel-to-Channel Isolation
- Analog Channels: 12
- Form Factor: DIN Rail
- Resolution: 16
from Gefran
The R-U8 module has 8 optically isolated digital outputs, type PNP, 24 VDC-3A, and can be used to send signals and OKs to electronic devices, directly power loads in VDC within the limits of rated currents, or control loads of any kind via solid state relay, contactors, etc. The outputs have the GND... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 8
- Form Factor: Modular Bay or Slot System
- Outputs: Analog Voltage Output; Analog Current Output; Relay Output
from Moxa Inc.
Outputs per Module. 16 channels, sink type. On-State Voltage Drop. Max. 0.3 VDC @ 25 °C. On-State Current. Min. 1 mA per channel. Off Leakage Current. Max. 50 μA. Output Current Rating. • Max. 0.3 A per channel. • Max. 4 A per common. Common Type. 16 channels for 2 COMs (single... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 16
- Form Factor: Modular Bay or Slot System
- User Interface: Computer Programmable
from OMEGA Engineering, Inc.
The new iD Series signal conditioners combine the accuracy of laboratory instrumentation with the performance required by demanding industrial applications. The iD Series signal conditioners are ideal for those applications in Data Acquisition, Test & Measurement, Process Control, and Industrial... [See More]
- Isolation: Isolated Digital Outputs; Isolated Analog Voltage Output
- Accuracy: 0.1000
- Resolution: 19
- Outputs: Analog Voltage Output (optional feature); Analog Current Output (optional feature)
from ACCES I/O Products, Inc.
Features. Industry standard, opto-isolated digital I/O modules. Choice of AC or DC inputs or outputs. Screw terminals for easy interface to field wiring. Edge connectors for interface to digital I/O cards via ribbon cable. 4000V optical isolation. Slim design to save space. Alumina substrate... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 16
- Form Factor: PC Board
- Outputs: Analog Voltage Output
from Opto 22
Opto 22 ’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off. This AC output module is... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 2
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Isolation: Isolated Digital Outputs; Isolated Analog Voltage Output; Channel-to-Channel Isolation
- Analog Channels: 8
- Form Factor: DIN Rail
- Digital I/O Channels: 32
from Moxa Inc.
Outputs per Module. 16 channels, source type. On-State Voltage Drop. Max. 0.3 VDC @ 25 °C. On-State Current. Min. 1 mA per channel. Off Leakage Current. Max. 50 μA. Output Current Rating. • Max. 0.3 A per channel. • Max. 4 A per common. Common Type. 16 channels for 2 COMs (single... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 16
- Form Factor: Modular Bay or Slot System
- User Interface: Computer Programmable
from Opto 22
Opto 22 ’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off. This AC output module is... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 2
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output
from Moxa Inc.
Outputs per Module. 8 channels, sink type. On-State Voltage Drop. Max. 0.3 VDC @ 25 °C. On-State Current. Min. 1 mA per channel. Off Leakage Current. Max. 50 μA. Output Current Rating. Max. 0.5 A per channel. Common Type. 8 channels per external common (single common). Output Voltage Range. [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 8
- Form Factor: Modular Bay or Slot System
- User Interface: Computer Programmable
from Opto 22
The OAC15 output module is used for controlling or switching AC loads of 12-140 VAC. Each module provides up to 4000 volts (transient) of optical isolation between the field devices and the control logic. This module is equivalent to a single pole, single throw, normally open contact (FORM A,... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 2
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output
from Moxa Inc.
Outputs per Module. 8 channels, source type. On-State Voltage Drop. Max. 0.3 VDC @ 25 °C. On-State Current. Min. 1 mA per channel. Off Leakage Current. Max. 50 μA. Output Current Rating. Max. 0.5 A per channel. Common Type. 8 channels per external common (single common). Output Voltage Range. [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 8
- Form Factor: Modular Bay or Slot System
- User Interface: Computer Programmable
from Opto 22
G4 DC output modules are used to control or switch DC loads. Each module provides up to 4000 volts of optical isolation (transient) between field devices and control logic. Typical applications for DC output modules include switching loads such as DC relays, solenoids, motor starters, lamps, and... [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Analog Voltage Output
- Form Factor: Modular Bay or Slot System
- User Interface: None
from Moxa Inc.
Built-in 2-port Ethernet switch for daisy-chain topologies. Free support of Moxa ’s push-based Active OPC Server Lite. - Seamlessly connect to any SCADA system. - Save 80% on network bandwidth. - I/O response that ’s seven times faster. User-defined Modbus/TCP addressing. MXIO... [See More]
- Isolation: Isolated Digital Outputs
- Digital I/O Channels: 16
- Form Factor: DIN Rail
- User Interface: Computer Programmable
from Opto 22
The G4ODC5R is a dry-contact, low-contact-resistance DC output. It is a single-pole, single-throw, normally open mechanical relay (Form A, SPST-NO). Typical applications for dry-contact modules include analog signal and communication line multiplexing. [See More]
- Isolation: Isolated Digital Outputs
- Outputs: Analog Voltage Output
- Form Factor: Modular Bay or Slot System
- User Interface: None