Vibrating / Tuning Fork Liquid Level Sensors
from ABB Measurement & Analytics
The resonant frequency is continuously monitored for changes created by a wet or dry sensor and an alarm is provided via relay. The RS85 should be used when the application requires optional process connections, exotic materials of construction, coatings, finishes or adjustable time delay and... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Number of Switch Points Range: 1
from BinMaster, Inc.
The VR-90 is a vibrating rod used for level indication in granular and coarse-grained bulk solids contained in bins, tanks, silos, and hoppers. It features a round, stainless steel rod that resists buildup and requires minimal maintenance. The VR-90 is appropriate for a wide variety of processing... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Maximum Pressure: 232
from RS Components, Ltd.
VEGASWING 61 liquid level switch,G 1 [See More]
- Meter Technology: Vibrating/Tuning Fork Method; Other Technology (Such as tilt etc.)
- Operating Temp: -58 to 302
- Maximum Pressure: 928
from RS Components, Ltd.
Vegaswing 51 liquid level switch G3/4in [See More]
- Meter Technology: Vibrating/Tuning Fork Method; Other Technology (Such as tilt etc.)
- Operating Temp: -40 to 212
from RS Components, Ltd.
VEGASWING 51 liquid level system [See More]
- Meter Technology: Vibrating/Tuning Fork Method; Other Technology (Such as tilt etc.)
- Operating Temp: -40 to 302
- Maximum Pressure: 928
from OMEGA Engineering, Inc.
The LTU-2000 Series Tuning Fork Sensors are point level switches that are designed to detect low or high levels of liquids. The LTU-2000 Series is based on the vibrating tuning fork principle, using piezoelectric crystals. The switch vibrates at a resonant frequency. When the tuning fork is... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Number of Switch Points Range: 1
from Automation Products, Inc.
The Type CL-10DJI Dynatrol ® Interface Level Detector has the unique ability to detect the interface: Between a liquid and a settled bed of solids. Between a liquid and a floating bed of solids. Between liquid phases of significantly different viscosities. Advantages. Versatile: This control is... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only; Sensor System
- Maximum Pressure: 1000
from Siemens Process Instrumentation
Siemens vibrating level switches detect high, low, and demand levels for liquids and solids. They perform in extreme conditions and benefit many industries. SITRANS LVL100: detects liquid and slurry levels in confined spaces. SITRANS LVL200: detects liquid and slurry levels while monitoring for... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Measuring Range: 1.57
- Level Measurement: Single Point or Multi-Point Level
- Maximum Pressure: 928
from GF Piping Systems
Type 2280 Tuning Forks are suitable for level detection of liquids or granular, powdered solids. Mounted on tanks filling / emptying can be controlled using these devices just as well they can generate fail-safe alarms providing overfill- or dry run protection. The operation principle is based on... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Continuous Level
- Device Type: Sensor Only
- Mounting: Side mount
from VEGA Americas, Inc.
Application area. It detects the limit level reliably and with millimetre accuracy directly at the mounting position. Small level switch version with stainless steel housing. The VEGASWING 51 is a universal level switch with small dimensions for use in liquids. Independent of the mounting position,... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Operating Temp: -40 to 158
from Sitron
The MVTK with no housing comes in two versions: The MVTKAC powered by 85 to 264Vac or the MVTKDC, powered by 24Vdc. Both units come with a standard DIN electrical connection. Either unit is an ideal solution for point level detection of liquids, regardless of the conductivity or dielectric of the... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Maximum Pressure: 725
- Device Type: Sensor Only
- Display: Non-electrical visual or audio output
from KOBOLD Instruments, Inc.
Product Features. All Plastic Construction. Tolerates Foaming, Turbulence and Coatings. Reliable Solid State Design. No Wear Components. NEMA 6 rating. KOBOLD's NWP level switch works on the vibrating fork principle. The tuning fork vibrates at a frequency of 400 Hz in air. When the fork becomes... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Number of Switch Points Range: 1
from Burkert Fluid Control Systems
The Type 8110 is a filling level switch for liquids, using a tuning fork as the sensor element. It is designed for industrial use in all areas of process technology and can be used in liquids. Typical applications are overfill or dry run protection. The small tuning fork (40 mm in length) can be... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Material Temperature: -40 to 302
- Maximum Pressure: 928
- Operating Temp: -40 to 158
from Malema Sensors
LD60/LD61 is a level switch based on the vibrating (tuning) fork technique. It is a robust and compact switch for the measurement of liquids and solids (only LD60). Features: No moving parts. Not affected by temperatures or pressure changes. Suitable for liquids with viscosity up to 10,000... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Measuring Range: 2.76 to 236
- Device Type: Sensor Only
- Mounting: Top mount
from Automation24, Inc.
The Liquiphant FTL31-CA1V3BAVCJ from Endress+Hauser is a compact and reliable point level switch for liquids. It is very suitable as overflow protection or as pump protection in cleaning and filter systems, as well as in coolant and lubricant tanks. The PNP-switching FTL31 requires no calibration,... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor System
- Maximum Pressure: 145
from Automation Products, Inc.
The Dynatrol ® Type CL-10RH liquid level probe and 102B control switch are used for application to either high or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors. [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only; Sensor System
- Maximum Pressure: 1000
from VEGA Americas, Inc.
Application area. The position of the switching point can be up to 1 m away from the installation location. VEGASWING 53 is a universal liquid level switch with smallest dimensions. Independent of the mounting position, it detects the limit level reliably and with millimetre accuracy. The device can... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Operating Temp: -40 to 158
from Sitron
The VTKR with a small robust aluminum housing (G1) comes standard with a universal power supply: 24Vdc or 85 to 264Vac. It is an ideal solution for point level detection of liquids, regardless of the conductivity or dielectric of the product. The G1 Aluminum housing can also be ordered with an... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Maximum Pressure: 725
from Automation24, Inc.
The Liquiphant FTL31-CA4V2AAVAJ from Endress+Hauser is a compact and reliable point level switch for liquids. It is very suitable as overflow protection or as pump protection in cleaning and filter systems, as well as in coolant and lubricant tanks. The PNP-switching FTL31 requires no calibration,... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor System
- Maximum Pressure: 580
from VEGA Americas, Inc.
Application area. It detects the limit level reliably and with millimetre accuracy directly at the mounting position. Numerous process fittings, approvals as well as housing and electronics versions. The VEGASWING 61 is a universal level switch for use in all liquids. Independent of the mounting... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Operating Temp: -40 to 158
from Sitron
The VTK with a small nylon housing (N1) comes in two versions: The VTKR with a universal power supply (24Vdc or 85 to 264Vac) or the VTK-DC, powered by 24Vdc only. Either unit is an ideal solution for point level detection of liquids, regardless of the conductivity or dielectric of the product. All... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor Only
- Maximum Pressure: 725
from Automation24, Inc.
The Liquiphant FTL31-CA4V2AAVBJ from Endress+Hauser is a compact and reliable point level switch for liquids. It is very suitable as overflow protection or as pump protection in cleaning and filter systems, as well as in coolant and lubricant tanks. The PNP-switching FTL31 requires no calibration,... [See More]
- Meter Technology: Vibrating/Tuning Fork Method
- Level Measurement: Single Point or Multi-Point Level
- Device Type: Sensor System
- Maximum Pressure: 580