Computer Interface Thermocouple Temperature Transmitters
from Conax Technologies
Profibus ® PA/Foundation ™ Fieldbus Transmitter Din Rail (FISCO/ATEX/CSA/FM) – Model 6350B. * PROFIBUS ® PA Ver. 3.0. * FOUNDATION ™ Fieldbus Ver. ITK 4.6. * Automatic Switch Between Protocols. * FISCO Certified. * Basic or LAS Capability with Foundation ™ Fieldbus. [See More]
- Local Interface: Computer Interface
- Other Input: Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
- Thermocouple: E; J; K; N; T; B; S; R; W
- Sensed Temperature: -328 to 4172
from Pyromation
Temperature transmitters make it possible to send a scalable (4 to 20) mA signal from a temperature sensor to a control device without investing in long, expensive runs of thermocouple or RTD wire. Pyromation carries programmable RTD and thermocouple temperature transmitters that can be mounted in... [See More]
- Local Interface: Computer Interface
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
- Thermocouple: E; J; K; N; T; B; S; R
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style) (optional feature); DIN Rail Mounting (optional feature)
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Local Interface: Computer Interface
- Sensed Temperature: -328 to 3308
- Thermocouple: E; J; K; N; T; B; S; R
- Mounting Options: DIN Rail Mounting
from ABB Measurement & Analytics
The field-mount temperature transmitter can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD or local HMI (optional). The Field Information Manager (FIM) is also supported via FDI technology. For PROFIBUS the configuration is possible via GST-file, EDD or... [See More]
- Local Interface: Digital Front Panel; Computer Interface
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
- Thermocouple: E; J; K; N; T; B; S; R
- Sensed Temperature: -328 to 1562
from West Control Solutions
The microprocessor-controlled KS 816 controller provides precise, low-cost multi-loop control of temperature and features an interface for bus or field-bus. The KS 816 can be used as a freely configurable field-bus transmitter with universal inputs for standard signals, thermocouples and Pt 100... [See More]
- Local Interface: Computer Interface
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
- Thermocouple: E; J; K; N; T; S; R; W
- Sensed Temperature: -328 to 4172
from FineTek
The EST Series is a grain temperature monitoring system consisting of the EST110 sensors and EST120 temperature & level monitoring transmitter and MMS-TLA PC-software. The EST110 sensor cable is for temperature sensing only, the EST120 is for temperature/level monitoring from a single cable. [See More]
- Local Interface: Computer Interface
- Interface: Serial Interface
from Yokogawa Corporation of America
YTMX580 can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4 to 20 mA DC signal input. [See More]
- Local Interface: Computer Interface
- Operating Temperature: -40 to 185
- Thermocouple: E; J; K; N; T; B; S; R
from OMEGA Engineering, Inc.
It provides 2 channels of configurable inputs, and supports multiple voltage, RTD, thermocouple inputs with auto reference junction compensation. If parallel connected to an external precise resistance, it accepts current signal input. Each channel has its own digital filtering and can adjust its... [See More]
- Local Interface: Computer Interface
- Sensed Temperature: -328 to 4172
- Thermocouple: E; J; K; N; T; B; S; R; W
- Mounting Options: DIN Rail Mounting
from LORD MicroStrain Sensing Systems
Overview. The TC-Link ® -1CH -LXRS ™ 6 Channel Wireless Thermocouple Node features a standard thermocouple input connector with an embedded cold junction temperature compensation sensor. On-board linearization algorithms are software programmable to support a wide range of thermocouple... [See More]
- Local Interface: Computer Interface
- Sensed Temperature: -346 to 3308
- Thermocouple: E; J; K; N; T; B; S; R
- Connection: Plug or Quick Connect
from Status Instruments, Inc.
The SEM310 is a field mount temperature transmitter designed to replace the terminal block in a sensor head. It is fully encapsulated to ensure environmental integrity. Although small in size it out performs other larger and more expensive transmitters. Also available in DIN rail mount format... [See More]
- Local Interface: Computer Interface
- Sensed Temperature: -328 to 3200
- Thermocouple: E; J; K; N; S; R
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style); DIN Rail Mounting (optional feature)
from Acromag, Inc.
Universal TC or millivolt input (TC type J, K, T, R, S, E, B, N or ±100mV input). Universal current/voltage output. 12-32V DC local/bus power. The TT333 model is a space-saving four-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional control... [See More]
- Local Interface: Computer Interface
- Other Input: Accepts Generic Analog Voltage Inputs
- Thermocouple: E; J (optional feature); K (optional feature); T (optional feature); S (optional feature); R (optional feature)
- Mounting Options: DIN Rail Mounting
from Automation24, Inc.
Temperature transmitter TxRail-USB - 8806037306 from NOVUS automation is the accurate and reliable way to convert any number of temperature signals to a usable current or voltage analog signals. The TxRail-USB - 8806037306 temperature trensmitter can receive inputs from thermocouple, RTD,... [See More]
- Local Interface: Computer Interface
- Interface: Serial Interface
- Output: Analog Current (Typical 4-20 mA); Analog Voltage
- Connection: Screw Clamps or Lugs