Front Panel and Display Bridge Conditioners
from Encore Electronics, Inc.
The Model 220 provides a pure sinusoidal signal. of known strain to your strain gage measurement. system. This arrangement simulates actual vibration. signals and can be used with AC coupled amplifiers. [See More]
- User Interface: Front Panel
- Excitation: Voltage
- Form Factor: Stand-alone
- AC Voltage: .5V to 10V
from OMEGA Engineering, Inc.
The DMD4059 accepts an input from full Wheatstone strain bridge sensors, pressure transducers or load cells. It provides filtering, amplifies, and converts the millivolt input signal into the selected dc voltage or current output that is linear to the input. The 3-way 1200V isolation eliminates... [See More]
- User Interface: Front Panel
- Form Factor: DIN Rail
- Channels: 4
- Excitation: Voltage
from Baumer Ltd.
Bridge amplifiers convert the mV signals from strain gages into a current or voltage output signal. Baumer bridge amplifier can be used in static and cyclical measurements. • Bridge amplifier, selectable configuration (2 x 1/4 S/G bridge and full bridge). • Voltage or current output. [See More]
- User Interface: Front Panel
- Inputs: Bridge Input
- Form Factor: Panel / Chassis Mount
- Outputs: Analog Voltage Output (optional feature); Analog Current Output (optional feature)
from Encore Electronics, Inc.
The Model 226-002 provides a calibrated sinusoidal signal to your strain gage measurement system. A precision cal-resistor. in series with a modulation signal is connected across the strain gage. The peak-to-peak value. of modulation signal is automatically set to. equal the bridge excitation mode. [See More]
- User Interface: Front Panel
- Excitation: Voltage
- Form Factor: Stand-alone
- AC Voltage: .25V to 15V