Strain Gauge / Bridge Data Loggers and Data Recorders
from Piezo-Metrics
Bridge and Strain Data Loggers are designed for use with strain gauges, load cells, pressure transducers and in other civil engineering applications where the collection of strain data is required. These easy-to-use devices are an ideal solution for replacing costly strip chart recorders. [See More]
- Inputs: Bridge Input
from OMEGA Engineering, Inc.
The OM-CP-BRIDGE110 is a miniature battery powered, stand alone, bridge/strain gage data logger. The OM-CP-BRIDGE110 features a real-time clock module that extends the battery life to more than 10 years (15 minute reading rate at 25 °C) and allows for high speed downloads. This is an all-in-one... [See More]
- Inputs: Bridge Input
- Form Factor: Stand-alone
- Analog Channels: 1
- Application: General Lab & Industrial
from CAS DataLoggers
The Environmental Data Logger. The dataTaker DT82E is an intelligent data logger that was designed with environmental applications in mind. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Tach; Monolithic Temperature Sensors
- Digital I/O Channels: 4
- Analog Channels: 6
- Sampling Frequency: 0.0250
from Next Industries S.r.L
The OMNIAlog MI400 MAVT is an ultra low powered logger with integral modem designed specifically for remote applications. The next step up from the MI400 MAV, it has more analogue inputs and Modbus slave capabilities. 4 differential software programmable analog input. Each of the 4 channels offers... [See More]
- Inputs: Thermistor Input; RTD Input; Bridge Input; Servo Inclinometer, Potenziometer
- Differential Channels: Yes
- Analog Channels: 4
- Digital I/O Channels: 0
from Spectral Dynamics, Inc.
The Model VX2805B is a completely integrated 8 channel data recording VXI module. Each channel includes a bridge signal conditioner, a low pass filter, a 16-bit 5M Samples/sec/ch. ADC, and 16M Samples of DRAM storage per channel. DRAM may be divided into 2, 4 or 8 segments for multiple event... [See More]
- Inputs: Bridge Input
- Differential Channels: Yes
- Analog Channels: 8
- Digital I/O Channels: 0
from OMEGA Engineering, Inc.
The OM-CP-BRIDGE120 is a miniature, battery-powered, standalone, bridge/strain gage data logger. It features a 20 Hz processing speed and a real-time clock module. This portable, easy-to-use device can measure and record up to 32,767 measurements per channel. The storage medium is non-volatile solid... [See More]
- Inputs: Bridge Input
- Form Factor: Stand-alone
- Analog Channels: 1
- Application: General Lab & Industrial
from CAS DataLoggers
Internal GSM Modem. The dataTaker DT82EM is an intelligent data logger that incorporates a built-in GSM modem with email and SMS support for automated data and alarm transfer from remote sites. The DT82EM features USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Tach; Monolithic Temperature Sensors
- Digital I/O Channels: 4
- Analog Channels: 2
- Sampling Frequency: 0.0250
from Next Industries S.r.L
The OMNIAlog MI480 is a smart datalogger that provides an extensive array of features that allow it to be used across a wide variety of applications. The MI480 is a robust, stand alone, low power data logger featuring USB memory stick support, 24 bit resolution, extensive communications capabilities... [See More]
- Inputs: RTD Input; Bridge Input; Servo Inclinometer, Potenziometer, Vibrating Wire
- Differential Channels: Yes
- Analog Channels: 8
- Digital I/O Channels: 2
from Spectral Dynamics, Inc.
The Model VX2824B is a completely integrated 8 channel data recording VXI module. Each channel includes a bridge signal conditioner, a low pass filter, a 16-bit 2.5M Samples/sec/ch. ADC, and 16M Samples of DRAM storage per channel. DRAM may be divided into 2, 4 or 8 segments for multiple event... [See More]
- Inputs: Bridge Input
- Differential Channels: Yes
- Analog Channels: 8
- Digital I/O Channels: 0
from OMEGA Engineering, Inc.
The OM-CP-PRHTEMP101 and OM-CP-PRHTEMP110 are miniature, battery powered, stand-alone, temperature humidity and pressure dataloggers. These all-in-one compact, portable, easy-to-use devices will measure and record up to 13,107 humidity and 13,107 temperature and 13,107 pressure measurements. These... [See More]
- Inputs: Thermistor Input; Bridge Input
- Form Factor: Stand-alone
- Analog Channels: 2
- Application: General Lab & Industrial
from CAS DataLoggers
The Industrial Data Logger. The dataTaker DT82I was designed for industrial applications that focus on flexible serial type communications such as RS232, RS422 and RS485. The DT82i is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Tach; Monolithic Temperature Sensors
- Digital I/O Channels: 4
- Analog Channels: 6
- Sampling Frequency: 0.0250
from Next Industries S.r.L
The OMNIAlog MI816 is a smart datalogger that provides an extensive array of features that allow it to be used across a wide variety of applications. The MI816C is a robust, stand alone, low power data logger featuring USB memory stick support, 24 bit resolution, extensive communications... [See More]
- Inputs: RTD Input; Bridge Input; Servo Inclinometer, Potenziometer
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 2
from OMEGA Engineering, Inc.
The OM-CP-ULTRASHOCK-EB is a battery powered, stand alone temperature, pressure, humidity and 3-axis shock recorder which offers a battery life of up to 60 days typical. The unit measures and records temperature, pressure and humidity at the selected reading rates, while shock is recorded as the... [See More]
- Inputs: Accelerometer Input; Thermocouple Input; Bridge Input
- Differential Channels: Yes
- Analog Channels: 9
- Sampling Frequency: 512
from CAS DataLoggers
The Intelligent Logger. The dataTaker DT80 is an intelligent data logger with an extensive array of features that allow it to be used across a wide variety of applications. This robust, stand alone, low power data logger features USB memory stick support, 18 bit resolution, extensive communications... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Monolithic Temperature Sensors
- Digital I/O Channels: 12
- Analog Channels: 15
- Sampling Frequency: 0.0250