Threaded Positive Displacement Flow Meters
from Assured Automation
The WM-PD series water meters are volumetric piston displacement water meters. These meters use a mechanical transmission to advance a hermetically sealed, 8-digit register. They are suitable for use with potable cold water, and hot water. There are two sizes available, 1/2 inch and 3/4 inch. [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50 to 0.75
- Meter Technology: Piston
- Mounting: In-line
from HydraCheck Inc.
To test a hydraulic pump for leakage, you must consider three things: convenience, safety and accuracy. This portable test kit will give you the same result as testing your pump on a state-of-the-art test bench at a fraction of the cost. Comes complete with adjustable load cell, glycerin-filled... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from Assured Automation
The D10 is a positive displacement meter that is suitable for use on potable drinking water systems. The meters have a low starting flow rate and excellent accuracy within the normal flow range. All sizes include an internal reed switch and for pulse output with a 2 foot long, 2-wire cable emerging... [See More]
- End Fittings: In-line Flanged; In-line Threaded
- Mounting: In-line
- Pipe Diameter: 0.50 to 2.00
- Process Media Type: Liquid
from HydraCheck Inc.
To test a hydraulic pump for leakage, you must consider three things: convenience, safety, and accuracy. This portable test kit will give you the same result as testing your pump on a state-of-the-art test bench at a fraction of the cost. Comes complete with adjustable load cell, glycerin-filled... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from HydraCheck Inc.
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 5000 PSI, 345 bar. The large clear 63mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from HydraCheck Inc.
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 6000 psi (420 bar). The large clear 2-1/2 ″ (63 mm) diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from HydraCheck Inc.
Ideal for monitoring pump performance and media flows in hydraulic systems. Flows up to 150 GPM (568 Lpm). Pressures up to 6000 PSI (414 bar). Use these flow meters to setup, adjust and test hydraulic pumps, motors, cylinders and more!. The only way to test a pump and motors safely and effectively... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from HydraCheck Inc.
Ideal for monitoring pump performance and media flows in hydraulic systems. Why choose a reverse flow, flow meter?. Generally, one-way flow, inline flow meters have an integral check valve assembly that prevents the oil from flowing in reverse. This feature is safe when testing hydraulic pumps, but... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from HydraCheck Inc.
HydraCheck adds versatility to its range of inline flow meter test kits by adding a safety relief valve to the load-cell. This unique feature removes the risks typically associated with testing fixed-displacement pumps and single-rod, double-acting cylinders. For example, in a fixed-displacement... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from Solutions with Innovation, LLC
The F001 is a precision machined, piston type flow switch that provides unsurpassed durability and reliability. Its all brass or 316 stainless steel body is rated to 1000 psig with its internal piston the only moving part. Supplied with ¼" NPT inlet and outlet ports, the F001 can be factory... [See More]
- End Fittings: In-line Threaded
- Process Media Type: Liquid
- Meter Technology: Piston
- Operating Pressure: 1000
from Litre Meter Limited
Round Gear Positive Displacement flowmeter system incorporating digital signal processing. [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Pipe Diameter: 0.04 to 5.91
- Meter Technology: Round Gear
- Mounting: In-line
from OMEGA Engineering, Inc.
The FLC Series is the economical way to monitor municipal water flows, verify pump outlets and monitor fluid conditions. Piston design allows for horizontal, vertical or inverted installation and is a proven method for accurate, dependable flow rate indication. The compact design measures less than... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 1.00 to 3.40
- Meter Technology: Piston
- Mounting: In-line
from Flow Technology, Inc.
Positive Displacement Flow Meters – BL Series. The Flow Technology BL Series positive displacement flow meter is ideal for high pressure applications, such as methanol injection. By eliminating the need for high-strength fasteners, Flow Technology developed a unique “Boltless ”... [See More]
- End Fittings: In-line Threaded; Autoclave
- Mounting: In-line
- Pipe Diameter: 0.06 to 1.00
- Process Media Type: Liquid
from Malema Sensors
The M-200 Series flow switches are engineered and field tested for sensing increasing and decreasing flow rates of gases or liquids. Pressure variation effects are minimal. This series features such versatility, economy, and accuracy that they can be used in virtually any application requiring... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid; Gas
from KOBOLD Instruments, Inc.
Product Features. Aluminum and Stainless Steel Bodies. Measures Liquids with Viscosities to 1,000,000 cPs (w/special cut gears). Operating Pressures to 5,800 PSIG (model dependent). Electronic Output Options Include Analog and Frequency Outputs, LCD Totalizers and Batch Controllers. Mechanical... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Oval Gear
- Process Media Type: Liquid
from Great Plains Industries, Inc.
Field calibration available, faceplate rotates 90 ° [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 1.00
- Meter Technology: Nutating Disc
- Mounting: In-line
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range 0.04 to 4 liters/min. Maximum Operating Pressure 414 bar (6000 psi). Displacement 1.8 cc/rev. Weight 1.1 kg. Recommended Filtration 15 micron. Port Size(s). 1/8. " NPT or #4 SAE. Accuracy (at 30 cP). ±. 0.3% of reading over a 100:1 turndown (30 cP). Fluids Most... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.12
- Meter Technology: Gear Meter
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: Liquids - Infinite Adjustment between 0.5 GPM and 20.0 GPM; Air/Gases - See chart. Port Size: 1/2" NPT. Primary Construction Material: Brass or Stainless Steel. Setting Type: Adjustable. These externally adjustable switches are ideal for protecting machine tools from coolant flow... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50
- Meter Technology: Piston
- Mounting: In-line
from DME Company
For Oil, Water & Other Fluids. • Available with 1 ⁄2", 3 ⁄4" & 1" NPT threads. • EZ to install, in any position. • No special piping or flow straighteners needed. • No electrical connections. • Direct Reading Indication. • Accuracy within ±7%... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Piston
- Mounting: In-line
from Macnaught USA, Inc.
Macnaught M-Series Digital Flow Meters. The Macnaught M-Series Flow Meter class consists of our M1 Square Body Digital, MH High Pressure, and CR Chemical Resistant Flow Meter products. M1 Square Body Digital - Designed for Smallest Flow Meter Footprint Applications. Our F006, F009, M006, and M009... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Mounting: In-line
- Meter Technology: Oval Gear
- Process Media Type: Liquid
from Clark Solutions
Model DOZ01 flow sensors are used wherever the flow of liquids having different viscosities must be reliably and economically measured, such as in the following cases: Central lubrication systems. Transformer oils. Aggressive/caustic liquids in the chemical industry. The model DOZ01 flow sensor with... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25
- Meter Technology: Oval Gear
- Mounting: In-line
from Bijur Delimon International
Application. Individually calibrated and adjustable, Oil Flow Meters regulate and monitor oil flow. Features. Regulate and monitor oil flow to bearings and gears. Individually calibrated and adjustable with out graphs and viscosity curves. Various flow rates available in single meters or in banks of... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from KRAL AG
In selecting a flowmeter there is always the question of material compatibility. New liquids arrive on the market all the time, also the composition of existing liquids change. Environmental regulations can change the composition and determine how liquids are to be used. KRAL uses highly chemical... [See More]
- End Fittings: In-line Threaded
- Mounting: Insertion
- Meter Technology: Screw Spindles
- Process Media Type: Liquid
from Solutions with Innovation, LLC
The F002 is a precision machined, piston type flow switch that provides unsurpassed durability and reliability. Its all brass or 316 stainless steel body is rated to 1000 psig with its internal piston the only moving part. Supplied with ¼" NPT inlet and outlet ports and a ½" NPTF... [See More]
- End Fittings: In-line Threaded
- Process Media Type: Liquid
- Meter Technology: Piston
- Operating Pressure: 1000
from OMEGA Engineering, Inc.
The FL9000-AC Series flowmeters are ideal for a wide range of flow monitoring applications. These low cost flow meters will install in any position easily. Additional features include an adjustable flow alarm externally mounted on the flow meter. The flow alarm will automatically open or close AC... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75 to 1.00
- Meter Technology: Piston
- Mounting: In-line
from Flow Technology, Inc.
Positive Displacement Flow Meters – DC-E Series (PD Meter). Flow Technology has taken its patented flowmeter design and made it simpler. Many customers do not need the wide array of options that the DC-I Series offers. Therefore, Flow Technology has removed all but the most commonly used... [See More]
- End Fittings: In-line Threaded; NPT
- Mounting: In-line
- Pipe Diameter: 0.12 to 1.50
- Process Media Type: Liquid
from Malema Sensors
The M-50 Series low flow, flow switches monitor increasing and decreasing flow. They utilize a single moving part which responds to fluid (liquid or gas) flowing within a system. These switches are suitable for a wide range of applications in industrial, biomedical, and OEM products. The flow... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.12 to 0.25
- Meter Technology: Piston
- Mounting: In-line
from KOBOLD Instruments, Inc.
Product Features. Flow Ranges 0.24-11.1 GPH to 0.8-80 GPH. Brass or Stainless Steel Bodies. Pulse or 4-20 mA Outputs. Long-Life Sapphire Axle/Bearing Assembly. Compact Design. The DPM series flow sensor uses the pelton wheel principle to measure the flows of water and low viscosity liquids. Liquid... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Pelton Wheel
- Process Media Type: Liquid
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range 0.15 to 15 liters/min. Maximum Operating Pressure 414 bar (6000 psi). Displacement 4.2 cc/rev. Weight 1.8 kg. Recommended Filtration 15 micron. Port Size(s). 3/8. " NPT or #6 SAE. Accuracy (at 30 cP). ±. 0.3% of reading over a 100:1 turndown (30 cP). Fluids Most... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.38
- Meter Technology: Gear Meter
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: Liquids 0.5 GPM to 5 GPM. Port Size: 1/2" NPT. Primary Construction Material: Polypropylene. Setting Type: Fixed. These slim, inline switches reduce pressure drop to a minimum. They incorporate a unique, dual-diameter, internal bore and piston configuration to minimize flow... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50
- Meter Technology: Piston
- Mounting: In-line
from Macnaught USA, Inc.
Macnaught Hazard Zone Overview. Macnaught MX ExD, Intrinsically Safe, and Simple Safe Flow Meters were designed, certified and approved for most fluid Hazard Zone Atmospheres. Macnaught Hazard Meters are for clean process fluids and do not measure gases of fluids with solids. Clean Process Liquids... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Mounting: In-line
- Meter Technology: Oval Gear
- Process Media Type: Liquid
from Clark Solutions
The measuring mechanism in the DV04 flow meter consists of a pair of gearwheels that are driven by the fluid stream, much like a gearwheel pump. The measuring mechanism is supported by sleeve bearings or ball bearings. Two antimagnetic sensors, with a relative phase offset of 90 ° and... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.12 to 1.50
- Meter Technology: Oval Gear
- Mounting: In-line
from KRAL AG
Even with reduced operating parameters many applications require high accuracy. KRAL Volumeter Series OME offers high laboratory measuring accuracy under extreme conditions. The measuring chamber is produced to high accuracy. The sensor is positioned outside of the measuring chamber and has no... [See More]
- End Fittings: In-line Threaded
- Mounting: Insertion
- Meter Technology: Screw Spindles
- Process Media Type: Liquid
from Solutions with Innovation, LLC
The series F003A is an adjustable flow switch installed in line with the fluid movement to monitor flow rates from .75 to 4.0 and 2.0 to 8.0 GPM. The compact and durable design allows for ease of installation and the removable bonnet assembly provides easy access for cleaning without removal from... [See More]
- End Fittings: In-line Threaded
- Process Media Type: Liquid
- Meter Technology: Spring-Loaded Shuttle Magnet
- Operating Pressure: 400
from OMEGA Engineering, Inc.
The OMEGA ® FL-9000 E-Z View Flow meters provide accurate, in-line indication of oil or water flow rates at an economical cost. These meters utilize a spring and piston mechanism within a polysulfone metering tube. The E-Z View Meters are designed to mount in any position with no straight pipe... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75 to 1.00
- Meter Technology: Piston
- Mounting: In-line
from Flow Technology, Inc.
Positive Displacement Flow Meters – DC-F Series (PD Meter). The patented Flow Technology DC-F Sanitary Series positive displacement flow meter (PD Meter) is ideal for liquid flow applications in the food, dairy, and pharmaceutical industries. The design is ideal for accurately measuring thick... [See More]
- End Fittings: In-line Clamp; In-line Threaded
- Mounting: In-line
- Pipe Diameter: 0.12 to 2.00
- Process Media Type: Liquid
from Malema Sensors
The operating principle is based on a magnetic piston which responds only to the motion of fluids within the line, not to static or system pressures. In the presence of fluid flow, controlled movement of the piston actuates an external hermetically sealed reed switch. This switch can be used to... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid; Gas
from KOBOLD Instruments, Inc.
Product Features. Flow Range 1.6 to 110 GPH. Accurate Measurements for Lubricating Media. Economical Brass Construction. Accuracy ±1% Reading. The KOBOLD DRZ series rotary piston positive displacement flowmeter combines economy with high performance. The DRZ series is designed to measure any... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Liquid
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range 0.2 to 45 liters/min. Maximum Operating Pressure 414 bar (6000 psi). Displacement 13.5 cc/rev. Weight 3.7 kg. Recommended Filtration 30 micron. Port Size(s). 1/2. " NPT or #8 SAE. Accuracy (at 30 cP). ±. 0.3% of reading over a 100:1 turndown (30 cP). Fluids Most... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.35 to 0.50
- Meter Technology: Gear Meter
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: 0.1 GPM to 1.5 GPM. Port Size: 9/16" - 18 UNF. Primary Construction Material: Ryton ®. Setting Type: Fixed. More robust porting hubs offer better structural integrity. Molded cable grommet offers improved moisture protection. The FS-4 Series makes flow protection economical... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.56
- Meter Technology: Piston
- Mounting: In-line
from Macnaught USA, Inc.
Macnaught FCM Flow Meter. Macnaught FCM Flow Meters are special-purpose flow devices designed to provide .1% Accuracy in Fuel Consumption Meter Applications. FCM Meters thrive in harsh environments and work very well in heavy vibration, swirling dust, flying mud, heavy rain or other excessive mobile... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Mounting: In-line
- Meter Technology: Oval Gear
- Process Media Type: Liquid
from KRAL AG
The KRAL Volumeter OMH series is designed for high pressure application and can be applied to 6000 psi, a high pressure rarely achieved by other flowmeters. This is an extremely sturdy design apparent by the meter?s thick casing and through bolts. The inside hides a high precision measurement... [See More]
- End Fittings: In-line Threaded
- Mounting: Insertion
- Meter Technology: Screw Spindles
- Process Media Type: Liquid
from OMEGA Engineering, Inc.
The FL-6000 Series of general purpose flowmeters is designed to provide economical, accurate flow rate indication for oil and water. These industrial flowmeters utilize a spring-and-piston type assembly, which enables them to be mounted in any position, and gives immunity to changes in viscosity. [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50
- Meter Technology: Piston
- Mounting: In-line
from Flow Technology, Inc.
Positive Displacement Flow Meters – DC-I Series (PD Meter). The patented Flow Technology DC-I Series positive displacement flow meters (PD Meter) are ideal for a wide variety of liquid flow applications. These applications include, but are not limited to, paints, resins, petrochemicals,... [See More]
- End Fittings: In-line Threaded; NPT
- Mounting: In-line
- Pipe Diameter: 0.12 to 2.00
- Process Media Type: Liquid
from Malema Sensors
The M-701 offers low cost flow monitoring with a variety of switch actuation points and low pressure drop. M-701 is designed for ease of maintanance, as the bonnet and shuttle can be removed, leaving the housing and pipe work connections intact. All wetted parts are polypropylene or stainless steel,... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75
- Meter Technology: Piston
- Mounting: In-line
from KOBOLD Instruments, Inc.
Product Features. Suitable for Viscous Liquids. Maintains Precision with Viscosity Change. Five Material Combinations Available. Economically Priced. Easy to Maintain. Optional Analog Output, Digital Indicating Output Options. KOBOLD OVZ flowmeters offer users the advantages of positive displacement... [See More]
- End Fittings: In-line Threaded
- Process Media Type: Liquid
- Meter Technology: Oval Gear
- Operating Pressure: 580
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range 1.05 to 105 liters/min. Maximum Operating Pressure 414 bar (6000 psi). Displacement 38 cc/rev. Weight 7.7 kg. Recommended Filtration 30 micron. Port Size(s). 3/4. " NPT, #10 SAE,. Accuracy (at 30 cP). ±. 0.3% of reading over a 100:1 turndown (30 cP). Fluids Most... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75
- Meter Technology: Gear Meter
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: Liquids - 0.1 GPM to 1.5 GPM; Air/Gases - see chart. Port Size: 1/4" NPT. Primary Construction Material: Brass or Stainless Steel. Setting Type: Fixed. This series of precision-calibrated switches provide reliable and consistent performance; repeatability is within 1%. FS-925... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25
- Meter Technology: Piston
- Mounting: In-line
from Macnaught USA, Inc.
Macnaught MT Overview. Macnaught MT Turbine Flow Meters are Heavy Duty Industrial Grade Velocity Flow Fluid Measuring Devices. Our MT Meters utilize decades of proven cost-effective technology. Additionally, each meter is machined from solid 316 Stainless Steel Billet for reliable industrial... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Process Media Type: Liquid
- Mounting: In-line
- Operating Pressure: 800 to 5000
from KRAL AG
In most flow measuring instruments durability and precision are mutually exclusive, but the OMG provides both. At KRAL, our core competence in profiling screw spindles guarantees precision measuring chambers in the meter. Extremely accurate measurements are possible and the OMG's operation is smooth... [See More]
- End Fittings: In-line Threaded
- Mounting: Insertion
- Meter Technology: Screw Spindles
- Process Media Type: Liquid
from OMEGA Engineering, Inc.
The FL-7000 Series of General purpose flowmeters is designed to provide economical, accurate flowrate indication for oil and water. These industrial flowmeters utilize a spring-and-piston type assembly which enables them to be mounted in any position and immune to changes in viscosity. FL-7000... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75
- Meter Technology: Piston
- Mounting: In-line
from Flow Technology, Inc.
Positive Displacement Flowmeters – Tricklemeter. The Flow Technology TrickleMeter is ideal for measuring very low flows of low to high viscosity liquids. Its positive displacement design provides rugged, reliable operation for a variety of industrial applications. The SRP sensor is specially... [See More]
- End Fittings: In-line Threaded; Female NPT
- Mounting: In-line
- Pipe Diameter: 0.38
- Process Media Type: Liquid
from KOBOLD Instruments, Inc.
Product Features. Viscosities up to 100,000 cSt. Accuracy ±0.3% of Flow. To 6500 PSIG Max. Pressure. Can Detect Flow Direction. Handles a Variety of Lubricating Fluids. When your metering problem gets particularly dif ï ¬cult or when the absolute in precision is a must, the ZDM... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Rotating Gears
- Process Media Type: Liquid
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 3 cP) 2.0 to 189 liters/min. Maximum Operating Pressure 35, 105, or 240 bar (500, 1500, 3500 psi). Displacement 0.062 liters/rev. Weight 13.6 kg. Recommended Filtration 150 micron. Port Size(s) 1 1/2" NPT or 1 1/2" (DN 40) customer supplied ANSI RF flanges. Accuracy. [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 1.50
- Meter Technology: Helical Rotor
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: Liquids - 50-300 cc/min.; Air/Gases - See Chart at Bottom of Page. Port Size: 1/4" NPT. Primary Construction Material: Brass or Stainless Steel. Setting Type: Fixed. These switches provide accurate detection of excessive or insufficient flow rates in such applications as:... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25
- Meter Technology: Piston
- Mounting: In-line
from Macnaught USA, Inc.
Macnaught M Series Mechanical Register Flow Meter. Macnaught M Series Mechanical Register Flow Meters are Non-Powered Industrial Grade Mechanical Display totalizing flow devices. Well suited for registering totals in most fluid applications. Designed for clean process fluid, this meter is not for... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Mounting: In-line
- Meter Technology: Oval Gear
- Process Media Type: Liquid
from OMEGA Engineering, Inc.
The FL-9000 Series flowmeter are rugged, low-cost direct reading industrial class flowmeters that are simple to install. They can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone... [See More]
- End Fittings: Plain End; In-line Threaded
- Pipe Diameter: 1.50 to 2.00
- Meter Technology: Piston
- Mounting: In-line
from Flow Technology, Inc.
Low flow applications. The Omniflo ® turbine flowmeters utilize a low frictional drag bearing in a tangential design allowing the measurement of very low flow rates in either liquid or gas. These high resolution, low flow sensing instruments are capable of measuring flow rates as low as 0.001... [See More]
- End Fittings: In-line Flanged; In-line Threaded; Female NPT, AN (MS), and ANSI Flanges
- Process Media Type: Liquid; Gas
- Mounting: In-line
- Operating Pressure: 5800
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 3 cP) 5.0 to 540 liters/min. Maximum Operating Pressure 35 or 240 bar (500, 3500 psi). Displacement 0.182 liters/rev. Weight 18.1 kg. Recommended Filtration 150 micron. Port Size(s) 2 1/2" NPT or 2 1/2" (DN 65) customer supplied ANSI RF flanges. Accuracy. ±. [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 2.50
- Meter Technology: Helical Rotor
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: 0.10 GPM to 1.50 GPM. Port Size: 1/4" NPT. Primary Construction Material: Brass, Stainless Steel. Setting Type: Fixed. Measuring only 1" x 2-3/4" (25 mm-70 mm), these compact switches are ideal for use where space is at a premium. Designed for use with water and oil, these... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25
- Meter Technology: Piston
- Mounting: In-line
from Macnaught USA, Inc.
Macnaught MX Overview. Macnaught MX Oval Gear Flow Meters are Industrial Grade Positive Displacement Flow Meter devices. Our MX Meters provide true volumetric measurement of liquid thru the meter – not of scale, but actual flow measurement. MX Meter bodies are machined of solid billet, our... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded
- Mounting: In-line
- Meter Technology: Oval Gear
- Process Media Type: Liquid
from OMEGA Engineering, Inc.
Available in 1/2", 3/4", and 11/4" sizes with anodized aluminum, brass and/or stainless steel flow cartridges. Comes with 4.5 m (15') of stripped end integral cable. In the field, integral cable can be extended up to 90 m (100') with shielded copper cable. Units are securely protected in a sturdy... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25 to 1.25
- Meter Technology: Piston
- Mounting: In-line
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 3 cP) 15 to 1400 liters/min. Maximum Operating Pressure 35 or 240 bar (500, 3500 psi). Displacement 0.575 liters/rev. Weight 45.4 kg. Recommended Filtration 150 micron. Port Size(s) 3" NPT or 4" (DN 100) customer supplied. ANSI RF flanges. Accuracy. ±. 0.2% of... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 3.00 to 4.00
- Meter Technology: Helical Rotor
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: 0.25 GPM to 2.00 GPM. Port Size: Multiple. Primary Construction Material: Brass or Stainless Steel. Setting Type: Fixed. These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece... [See More]
- End Fittings: Compression; In-line Threaded
- Pipe Diameter: 0.38 to 0.50
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
The FLMW & FLMH flowmeters can be installed directly in the fluid line without flow straighteners or special piping. These flowmeters utilize a spring-and-piston type assembly which enables them to be mounted in any position and gives immunity from changes in viscosity. [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25 to 1.50
- Meter Technology: Piston
- Mounting: In-line
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 2 cP) 1 to 1800 cc/min. Maximum Operating Pressure 70 bar or 210 bar (1000 or 3000 psi). Displacement 0.89 cc/rev. Weight 0.6 kg. Recommended Filtration 10 micron. Port Size(s) 1/8" NPT, #4 SAE or manifold mount. Accuracy. ±. 0.2% of reading with a linearized... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.12
- Meter Technology: Piston
- Mounting: In-line
from Gems Sensors & Controls
Low Pressure Drop Design. Flow Rate Settings: 0.25 GPM to 2.00 GPM. Port Size: 3/8" NPT Male and 1/4" Quick Disconnect (QDC) Male. Primary Construction Material: Polypropylene. Setting Type: Fixed. This rugged inline flow switch offers the same superior performance and resistance to clogging as its... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25 to 2.75
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
The FLMG flowmeters feature rugged construction, easy installation and direct reading flow rates of air. The units are calibrated at 100 psi pressure suitable for most compressed pneumatic applications. The flowmeters utilize a spring and piston type assembly which enables them to be mounted in any... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25 to 1.50
- Meter Technology: Piston
- Mounting: In-line
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 3 cP) 10 to 10,000 cc/min. Maximum Operating Pressure 70 bar or 210 bar (1000 or 3000 psi). Displacement 10.5 cc/rev. Weight 3.3 kg. Recommended Filtration 10 micron. Port Size(s) 3/8" NPT, #6 SAE or manifold mount. Accuracy. ±. 0.2% of reading with a linearized... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50
- Meter Technology: Piston
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: 0.1 GPM to 1.0 GPM. Port Size: 1/4" NPT. Primary Construction Material: Brass. Setting Type: Fixed. A unique, patented piston design assures accuracy within 20% over a full range of viscosities - from 40 to 1000 SSU. Ideal for use in applications where liquids of different... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
The FL-8000A Series of General Purpose Flowmeters are designed to provide economical, accurate flow rate indication for oil and water. These industrial flowmeters utilize a spring and piston type assembly, which enables them to be mounted in any position, and gives immunity to changes in viscosity. [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 1.25
- Meter Technology: Piston
- Mounting: In-line
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 2 cps) 0.07 to 35 liters/min. Maximum Operating Pressure 70 bar or 210 bar (1000 or 3000 psi). Displacement 47.6 cc/rev. Weight 10.0 kg. Recommended Filtration 10 micron. Port Size(s) 1/2" NPT or #8 SAE. Accuracy. ±. 0.2% of reading with a linearized... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50
- Meter Technology: Piston
- Mounting: In-line
from Gems Sensors & Controls
Flow Rate Settings: 0.50 GPM to 3.00 GPM. Port Size: 1/2" NPT, 3/4" NPT, 1/2" Tube Compression Fitting. Primary Construction Material: 316 Stainless Steel. Setting Type: Fixed. The FS-480 large-body inline flow switch delivers ample flow rates with minimal pressure drop. 25% larger than its FS-380... [See More]
- End Fittings: Compression; In-line Threaded
- Pipe Diameter: 0.38 to 0.50
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
OMEGA ® multi-pressure pneumatic flowmeters feature a rugged anodized aluminum body design and easy installation. For air/compressed gas applications, these flowmeters include ranges from 5-5.0 SCFM to 50-1000 SCFM, at operating pressures up to 1000 psig. Their multi-pressure scales (from 40-130... [See More]
- End Fittings: In-line Threaded
- Mounting: In-line
- Meter Technology: Piston
- Process Media Type: Gas
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 2 cps) 0.15 to 100 liters/min. Maximum Operating Pressure 70 bar or 210 bar (1000 or 3000 psi). Displacement 169.5 cc/rev. Weight 25.0 kg. Recommended Filtration 10 micron. Port Size(s). ¾. " NPT or #12 SAE. Accuracy. ±. 0.2% of reading with a linearized... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
This rugged direct-reading flowmeter monitors air flowrates to determine optimum performance, flow regulator settings, or pneumatic system performance. It is intended for use in mobile or industrial pneumatic systems as well as air power operated hand tool systems. These flowmeters feature direct... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.50
- Meter Technology: Piston
- Mounting: In-line
from Max Machinery, Inc.
SPECIFICATIONS. Flow Range (at 1 cP) 10 to 4000 cc/min. Maximum Operating Pressure 140 bar (2000 psi). Displacement 10.5 cc/rev. Weight 5.0 kg. Recommended Filtration 10 micron. Port Sizes. ⅜. " NPT. Fluids Aqueous and non-lubricating liquids [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.38
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
The oval shaped smooth gears in the FTB-3000 Series are used to displace a precise volume of fluid, which is passed through the measurement chamber during each revolution. The toothless design, working with the fluid being measured, provides a complete viscous seal within the measuring chamber. This... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 1.00
- Meter Technology: Oval Gear
- Mounting: In-line
from Max Machinery, Inc.
The Max Piston family of flow meters feature the highest accuracy (0.2% of reading), widest flow range, 200:1 or more, smallest displacements and the tightest fits and tolerances making them suitable for low viscosity liquids. Consider the piston family for fuel measurement, hydraulic test stands,... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.12
- Meter Technology: Piston
- Mounting: In-line
from OMEGA Engineering, Inc.
The FPD2000 Series represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.25 to 1.25
- Meter Technology: Oval Gear
- Mounting: In-line
from OMEGA Engineering, Inc.
The FL-W Series of water flow monitors can be used with flows from 1 gph up to 90 gpm. These flowmeters utilize the fluid ’s movement to actuate a swinging vane (or piston), which drives the scale pointer and triggers the signal switch. SPECIFICATIONS: Signal Switch: 3-Wire SPDT, 15 A @ 125... [See More]
- End Fittings: In-line Threaded
- Pipe Diameter: 0.75 to 2.00
- Meter Technology: Piston
- Mounting: In-line