Industrial Thermoplastics and Thermoplastic Resins
from Victrex PLC
High performance thermoplastic material, 30% carbon fiber reinforced Poly Ether Ether Ketone (PEEK), semi crystalline, granules for injection molding, easy flow, FDA food contact compliant, color black. [See More]
- Industry: Aerospace; Automotive; Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging; Energy, Textile, Industrial, Food, Oil/Gas
- Filler: Carbon or Graphite
- Chemical System: PEEK
- Resins & Compounds: Pellets; MoldingCompound
from ExxonMobil - Polypropylene Products
Challenge reality and rethink what ’s possible in automotive performance, packaging design, hygiene comfort and appliance appeal. Offering a new benchmark in performance compared to traditional polypropylene, Achieve Advanced PP eliminates trade-offs in performance, processing and end-of-life... [See More]
- Industry: Automotive; Electronics; Sanitary; OEM or Industrial
- Deflection Temperature: 200
- Chemical System: Polypropylene
- Elongation: 9.2
from Fluoro-Plastics, Inc.
PTFE can be etched with a sodium ammonia or sodium naphthalene etch so that its surface is chemically modified for adhesion to various substrates using ordinary commercial grade epoxies. When etched for bonding, PTFE can be used as chute liners, vessel linings, and glued to processing surfaces to... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Resins & Compounds: ExtrusionGrade
from Celanese Corporation
New Hostaform ® SlideX ™ POM from Celanese is an all-in-one, tribologically modified acetal copolymer (POM) compound with extremely low wear. It can greatly reduce wear rate friction and mechanical systems for industrial, transportation and consumer products sliding applications. With a... [See More]
- Industry: OEM or Industrial; Transportation and Consumer Products Sliding Applications
- Chemical System: Acetal or Polyoxymethylene (POM); Tribologically Modified Acetal Copolymer (POM) Compound
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Filler / Reinforcement. Talc, 12% Filler by Volume. Features. Flame Retardant. Uses. Appliance Wire Insulation. Appliance Wire Jacketing. Cable Jacketing. Connectors. Flexible... [See More]
- Industry: OEM or Industrial; Appliance Wire Insulation, Appliance Wire Jacketing, Cable Jacketing, Connectors, Flexible Cord Jacketing, Industrial Cable Insulation, Terminal Ca..
- Resins & Compounds: Pellets; ExtrusionGrade
- Filler: Mineral or Inorganic
- Features: Flame Retardant
from Esprix Technologies
PRODUCT CHARACTERISTICS. KetoprixTM EKT23G3C3 and EKT23G3C2 resins are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also... [See More]
- Industry: Automotive; OEM or Industrial
- Filler: Fiber Reinforcement and Thermally Conductive Additives
- Chemical System: Aliphatic Polyketone Containing a 1,4-diketone Backbone Structure
- Resins & Compounds: MoldingCompound
from 3M Advanced Materials Division
In 1969, astronauts boarded the Apollo 11 spacecraft wearing boots containing 3M ™ Dyneon ™ Fluoroelastomers. Today, these synthetic elastomeric materials are used in some of the toughest environments on earth. From hot-running automotive engines to harsh chemicals of semiconductor... [See More]
- Industry: Aerospace; Automotive; Electronics; Energy Conversion (Battery / Fuel Cell); Electrical Power or High Voltage; Marine; Sanitary; Military; Repair or Construction; OEM or Industrial; Semiconductors or IC Packaging; Oil &Gas Exploration
- Chemical System: Tertrafluoroethylene, Hexafluoropropylene; Fluoropolymer; Polypropylene; Polyamide
- Type: Optical
- Filler: Unfilled
from Nylatech, Inc.
In addition to our extensive Nylon products, Nylatech also manufactures premium Acetal Rod & Acetal Sheet (Copolymer). Nylatech Acetal offers high strength and a resistance to impact and fatigue with a low coefficient of friction and good wear properties especially in wet environments. Our full... [See More]
- Industry: OEM or Industrial
- Resins & Compounds: CastingResin
- Chemical System: Acetal or Polyoxymethylene (POM)
from DuPont Plastics, Polymers & Resins
Crastin ® HR5315HF is a 15% glass reinforced PBT with high flow (HF), moderately toughened, hydrolysis resistant (HR) resin. Excellent balance of properties between terminal pullout and impact resistance. Developed for USCAR Class 3 and 4 environments. DuPont ™ Crastin® PBT thermoplastic... [See More]
- Industry: OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Thermoplastic Polyester (PET, PBT, etc.)
- Tensile Modulus: 754
from MCG - Performance Polymers Division
MODIC ™ offers two technologies designed to be used as a tie-resin or for peelable purposes: MODIC ™ - ACID-GRAFTED POLYMER (TIE RESIN). MODIC ™ tie-layer resin is acid grafted polyolefin forming a layer or a coating which provides adhesion between materials that have poor... [See More]
- Industry: Automotive; Sanitary; OEM or Industrial
- Resins & Compounds: FilmGrade; ExtrusionGrade; MoldingCompound
- Chemical System: Polycarbonate; Polyethylene; Polypropylene; Thermoplastic Polyester (PET, PBT, etc.)
from Ensinger North America
HYDLAR possesses a combination of physical properties that cannot be found in any other commercially available engineered plastic. Ensinger engineers have created a family of superior wear and abrasion resistant thermoplastics using aramid fiber reinforced polymer. This technology makes possible for... [See More]
- Industry: Repair or Construction; OEM or Industrial
- Deflection Temperature: 470
- Chemical System: Polyamide
- CTE: 16
from Idemitsu Chemicals USA Corporation
TARFLON ™ Polycarbonate thermoplastic products deliver exceptional impact strength and transparency. The stable performance of TARFLON ™ over a wide temperature range (-100C to 135C) makes it ideal for a wide variety of applications involving appliances, optical components such as light... [See More]
- Industry: Optoelectronics or Photonics; OEM or Industrial
- Chemical System: Polycarbonate
- Type: Optical
- Resins & Compounds: Pellets; MoldingCompound
from Eastman Chemical Company
Eastar ™ copolyester 6763 is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques including film and sheet extrusion. Eastar ™ Copolyester 6763 may be colored using color... [See More]
- Industry: Laminating; Sanitary; OEM or Industrial
- Deflection Temperature: 147
- Chemical System: Thermoplastic Polyester (PET, PBT, etc.)
- Tensile (Break): 4061
from Fluoro-Plastics, Inc.
High percentage of bronze powder (40-60%) yields high thermal conductivity and better creep resistance. Often used in hydraulic systems, particularly superb as linear bearings, e.g. slides, gibs, guide ways. Not suited for electrical applications. Bronze is attacked by certain chemicals. Compare... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Metal or MIM
- Chemical System: Fluoropolymer
- Tensile (Break): 2000 to 2500
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Uses. Appliance Wire Insulation. Appliance Wire Jacketing. Cable Jacketing. Connectors. Flexible Cord Jacketing. Industrial Cable Insulation. Terminal Cable Jacketing. [See More]
- Industry: OEM or Industrial; Appliance Wire Insulation, Appliance Wire Jacketing, Cable Jacketing, Connectors, Flexible Cord Jacketing, Industrial Cable Insulation, Terminal Ca..
- Tensile (Break): 610
- Resins & Compounds: Pellets; ExtrusionGrade
- Melt Flow: 1.50
from Nylatech, Inc.
Formulated for higher continuous operating temperatures, Nylatech ® Blue is ideal for hotter environments. This heat-stabilized grade is commonly used as bushings, rollers, wear pads and wear strips in ovens, kilns and industrial dryers. [See More]
- Industry: OEM or Industrial
- Resins & Compounds: CastingResin
- Chemical System: Polyamide
- Use Temperature: 240 to 275
from DuPont Plastics, Polymers & Resins
Sorona ® 3015G BK001 is a 15% glass fiber reinforced black polytrimethylene terephthalate resin containing 31% renewably sourced ingredients by weight (37% based on polymer only) with good strength, stiffness and surface appearance and low warpage. DuPont ™ Sorona ® EP thermoplastic... [See More]
- Industry: OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Thermoplastic Polyester (PET, PBT, etc.)
- Tensile Modulus: 899
from MCG - Performance Polymers Division
VINIKA ™ is the brand name for vinyl compounds, including soft (PVC-P) and rigid (PVC-U) solutions. The flexible PVC-P range includes phthalate and phenol free solutions with low VOC (Volatile Organic Content) and the rigid PVC-U line is lead free formulated. ENHANCED SOLUTIONS FOR SPECIFIC... [See More]
- Industry: Automotive; Electronics; Electrical Power or High Voltage; Repair or Construction; OEM or Industrial
- Resins & Compounds: ExtrusionGrade; MoldingCompound
- Chemical System: Vinyl / PVC
- Features: Flame Retardant; Anti-static or ESD Control
from Ensinger North America
In addition to unfilled PEEK natural which is beige-brown in color, a black pigmented version of PEEK is also available. TECAPEEK black is manufactured by Ensinger and may use Victrex ® PEEK 450G or Solvay Ketaspire ® KT-820 polymer. It is available in rod, plate, and tube in a variety of... [See More]
- Industry: Sanitary; OEM or Industrial
- Tensile (Break): 12750
- Chemical System: PEEK
- Tensile Modulus: 772
from Idemitsu Chemicals USA Corporation
Offering more strength and ductility than the WA grades, the N WA grades have been formulated with Nylon 66 to create a unique blend that offers strength and ductility, in the complex tool designs frequently encountered underhood in automotive USCAR class 3 and 4 environments. The N WA7020-02 and N... [See More]
- Industry: Automotive; OEM or Industrial
- Filler: Glass or FRP; Nylon
- Chemical System: Styrene or Polystyrene; Polyamide
- Resins & Compounds: Pellets; MoldingCompound
from Fluoro-Plastics, Inc.
Lower deformation under load. Higher compressive and flex modulus and increased hardness. Chemically inert –can be used in strong alkali and in HF, where glass reinforced compounds fail. Good initial wear and rubbing or sliding characteristics in both dry and water applications. Frequently... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Carbon or Graphite
- Chemical System: Fluoropolymer
- Tensile (Break): 1000 to 1600
from Nylatech, Inc.
Nylatech ® Natural Cast Nylon offers the excellent abrasion resistance, and dimensionally stable qualities inherent of all cast nylon grades. In addition, Nylatech ® Natural conforms to US F.D.A 21CFR177.1500 making it ideal for components in the Food Processing Industry. As with many... [See More]
- Industry: Sanitary; OEM or Industrial
- Resins & Compounds: CastingResin
- Chemical System: Polyamide
- Use Temperature: -40 to 220
from DuPont Plastics, Polymers & Resins
Zytel ® RS LC3030 NC010 is a renewable sourced polyamide 610 containing a minimum of 60% renewably sourced ingredient by weight. It is an unreinforced, low viscosity grade, developed for extrusion applications (filaments). The Zytel ® RS product family comprises all products based on PA1010... [See More]
- Industry: OEM or Industrial
- Tensile Modulus: 326
- Chemical System: Polyimide
from MCG - Performance Polymers Division
GOHSENOL ™ (PVOH/PVA) is the brand name of our Polyvinyl alcohol. It is a water soluble synthetic resin with excellent adhesive strength, film formability and chemical stability. Since its foundation in 1927, The Nippon Synthetic Chemical Industry Co Ltd, now Mitsubishi Chemical Corporation,... [See More]
- Industry: Sanitary; OEM or Industrial
- Resins & Compounds: FilmGrade
- Chemical System: Vinyl / PVC
from Ensinger North America
TECAPEEK ID blue is a metal detectable PEEK made with Victrex ® PEEK polymer. This PEEK has been modified with a detectable filler designed to increase detectability in food and pharmaceutical processes. The material is sensitive enough to allow for the easy detection of small particulates using... [See More]
- Industry: Sanitary; OEM or Industrial
- Filler: Metal or MIM
- Chemical System: PEEK
- Tensile (Break): 14500 to 16100
from Idemitsu Chemicals USA Corporation
Lower dielectric heating than PPS due to low dissipation factor. Easier processing than PPS. Lower cost than PPS. Application Requirements: Heat and chemical resistance. Dimensional stability for part flatness. [See More]
- Industry: Electronics; OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Styrene or Polystyrene
- Resins & Compounds: Pellets; MoldingCompound
from Fluoro-Plastics, Inc.
Surf Technologies is a leader in the manufacture of heavy walled PTFE tube, both in standard inch sizes and in AWG sizes. Tube is used in fluid handling applications for high temperature acids and caustics or where contamination is an issue, such as in wire braided hose. In applications where PTFE's... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Resins & Compounds: ExtrusionGrade
from Nylatech, Inc.
Nylatech Nythane is chemically formulated copolymer designed to offer an engineering material with the High Tensile and Compressive properties of Cast Nylon, with the impact and wear resistance of polyurethane. Offered in 3 specific grades, Nylatech ® Nythane has proven successful for the most... [See More]
- Industry: OEM or Industrial
- Filler: Unfilled
- Chemical System: Polyamide
- Resins & Compounds: CastingResin
from MCG - Performance Polymers Division
GOHSENX ™ is a line of advanced polyvinyl alcohol resins which have been modified for a variety of special functions. Its water resistance or excellent dispersion properties are both caracteristics that conventional PVOH doesn't possess. GOHSENX ™. Series. Characteristic. Key features. [See More]
- Industry: Sanitary; OEM or Industrial
- Resins & Compounds: FilmGrade
- Chemical System: Vinyl / PVC
from Ensinger North America
PEEK CF 30 is a 30% carbon filled PEEK material that is manufactured by Ensinger under the tradename TECAPEEK CF30 black. Its carbon fiber reinforcement lends the material a high level of rigidity and creep strength. Carbon fiber reinforced PEEK demonstrates very high mechanical strength values,... [See More]
- Industry: Aerospace; Automotive; Marine; Sanitary; OEM or Industrial
- Filler: Carbon or Graphite
- Chemical System: PEEK
- Deflection Temperature: 600
from Idemitsu Chemicals USA Corporation
Material: Xarec WA210. Better humidity resistance than PBT or Nylon. Better dimensional stability than PBT or Nylon. Faster cycle time and easier flow in tools than PBT. Lighter weight than PBT. Application Requirements: USCAR Class 3 heat and humidity resistance. Dimensional tolerance accuracy for... [See More]
- Industry: Automotive; OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Styrene or Polystyrene
- Resins & Compounds: Pellets; MoldingCompound
from Fluoro-Plastics, Inc.
Most widely used filler in various percentages (5%, 10%, 15% and 25%). Improves creep resistance, both at low and high temperatures. Chemically stable (except for strong alkalis and hydrofluoric acid (HF). Little effect on the electrical properties of PTFE, and improves wear and friction behavior. [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Glass or FRP
- Chemical System: Fluoropolymer
- Resins & Compounds: ExtrusionGrade
from Nylatech, Inc.
A special formulation of Liquid Lubricant encapsulated during manufacture, provides for true lubrication at the bearing surface. NYLATECH ® OIL is offered for applications where maintenance lubrication is difficult or impossible. As well, NYLATECH ’s specially formulated OIL, limits... [See More]
- Industry: Sanitary; OEM or Industrial
- Resins & Compounds: CastingResin
- Chemical System: Polyamide
- Use Temperature: 220 to 250
from MCG - Performance Polymers Division
SoarnoL ™ (EVOH), is a trade name of Ethylene-Vinyl Alcohol Copolymer (EVOH) originally developed through years of research. SoarnoL ™ (EVOH) is mainly composed of carbon, oxygen and hydrogen, has no toxic gases when burned, and its combustion heat is only half that of polyethylene,... [See More]
- Industry: Sanitary; OEM or Industrial
- Chemical System: Ethylene Copolymer (EEA, EVA, EBAC)
from Ensinger North America
The addition of 30% carbon fibers to Solvay Torlon ® plastic is what gives TECAPAI CM XP730 black compression molded polyamide-imide its excellent combination of physical properties. It is Ensinger's version of a product commonly referred to in web searches as “torlon 7530 ”. This... [See More]
- Industry: Aerospace; OEM or Industrial
- Filler: Carbon or Graphite
- Chemical System: Polyamide-imide
- Deflection Temperature: 526
from Idemitsu Chemicals USA Corporation
Material: Xarec WA550. Better chemical resistance to transformer oils than PET. Better hydrolytic stability (no drying) than PET. Easier to process than PET. Application Requirements: Chemical resistance. Good dimensional [See More]
- Industry: Automotive; OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Styrene or Polystyrene
- Resins & Compounds: Pellets; MoldingCompound
from Fluoro-Plastics, Inc.
Adds to hardness and stiffness. Reduces friction, especially starting coefficient of friction and steady-state wear. Effect on electrical properties is negligible. Unreactive chemically, and dissolves only in strong oxidizing acids [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Glass or FRP
- Chemical System: Fluoropolymer
- Tensile (Break): 2500 to 3000
from Nylatech, Inc.
Power-6 offers the load bearing capacity of steel with the abrasion resistance, wear resistance and noise reduction of nylon. In demanding applications where the load bearing capability of steel is required; such as a keyway in a sprocket, Power-6 is the answer. Any of Nylatech ’s Specialty... [See More]
- Industry: OEM or Industrial
- Resins & Compounds: CastingResin
- Chemical System: Polyamide
from Ensinger North America
This blue colored cast nylon type 6 exhibits properties similar to TECAST T Natural, and offers a good balance of strength and toughness. The polyamide type 6 material has good wear and abrasion resistance and offers a good mix of mechanical properties. Main Features: Good wear properties. Good... [See More]
- Industry: Repair or Construction; OEM or Industrial
- Deflection Temperature: 200 to 370
- Chemical System: Polyamide
- Thermal Conductivity: 0.2409
from Fluoro-Plastics, Inc.
Crystalline modification of high purity carbon. Excellent wear properties, particularly against soft metals. High load-carrying capability in high speed contact applications. Chemically inert. Frequently used with other filler, e.g. carbon [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Carbon or Graphite
- Chemical System: Fluoropolymer
- Tensile (Break): 2400 to 2600
from Nylatech, Inc.
NYLATECH ® PVM (pressure/velocity/maximum) was developed to provide a premium material for a variety of applications. Nylatech PVM is a self lubricated material with a low coefficient of friction that can increase the life of equipment. Nylatech ® PVM offers exceptional PV (pressure times... [See More]
- Industry: OEM or Industrial
- Resins & Compounds: CastingResin
- Chemical System: Polyamide
- Use Temperature: 240 to 255
from Ensinger North America
This compression molded material in beige is a Victrex ® PEEK polymer modified with 30% glass fibre for increased strength. Main Features: Excellent mechanical properties. Excellent strength and stiffness. Good chemical resistance. High continuous use temperature. Target Industries: Oil and Gas... [See More]
- Industry: OEM or Industrial
- Filler: Glass or FRP
- Chemical System: PEEK
- Tensile (Break): 13000
from Fluoro-Plastics, Inc.
PTFE with FDA compliant filler. For food processing and pharmaceutical bearing applications. Compatible with a wide variety of mating surfaces, both soft (e.g. mild steel) and harder surfaces. Compare this product to Rulon 641* [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Mineral or Inorganic
- Chemical System: Fluoropolymer
from Ensinger North America
TECAPEEK UD blue multi-detectable plastic has the highest temperature and chemical resistance capability of all of Ensinger's Ultra-detectable Products. With a heat deflection temperature over 300 °F, and excellent resistance to a wide range of cleaning chemicals, TECAPEEK UD blue offers... [See More]
- Industry: Sanitary; OEM or Industrial
- Tensile (Break): 12750
- Chemical System: PEEK
- Tensile Modulus: 772
from Fluoro-Plastics, Inc.
Low Friction. Extremely low wear. Increased hardness. Operates well against soft mating surfaces like aluminum, mild steel, brass and plastics. Ideal for stop-start applications to eliminate stick-slip. Compare this product to Rulon J* [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Mineral or Inorganic
- Chemical System: Fluoropolymer
from Ensinger North America
TECATRON GF40 natural is a 40% fiber glass reinforced material that combines very high mechanical properties as well as strength and rigidity, with excellent thermal properties. Furthermore, the high performance thermoplastic PPS with 40% glass fiber reinforcement offers excellent chemical... [See More]
- Industry: OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Polyphenylensulfide
- Thermal Conductivity: 0.2510
from Fluoro-Plastics, Inc.
Molded plate is available in thicknesses from 3/8ths of an inch up to four inches. Plate is inventoried in sizes from one-foot square to four feet square (sixteen square feet per sheet). Thickness tolerances range from plus .038" to minus .019" for 3/8th ” plate, up to plus .087", minus .043"... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Resins & Compounds: ExtrusionGrade
from Ensinger North America
TECAPAI CM XP530 is a compression molded polyamide-imide material that is modified with 30% glass fiber filler. Produced using Solvay Torlon ® plastic polymer, TECAPAI CM XP530 delivers a unique combination of properties and may be recognized as products commonly referred to in web searches as... [See More]
- Industry: Aerospace; OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Polyamide-imide
- Deflection Temperature: 515
from Fluoro-Plastics, Inc.
Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications. Surf Technologies extrudes rod in all standard sizes from 1/8th inch diameter up to 4 inches in diameter. Rod is inventoried in twelve foot lengths so it can be cut into six foot lengths (UPS... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Resins & Compounds: ExtrusionGrade
from Ensinger North America
DELRIN ®570 Shapes manufactured by Ensinger are 20% glass filled materials intended for general industrial use. The POM GF material offers very high stiffness, low warpage, and low creep for superior part performance under stress. The user can also count on good dimensional stability and... [See More]
- Industry: Automotive; Repair or Construction; OEM or Industrial
- Filler: Glass or FRP
- Chemical System: Acetal or Polyoxymethylene (POM)
- Deflection Temperature: 311 to 329
from Fluoro-Plastics, Inc.
Skived sheet can be made in any thickness from 15 mils up to .250 inches. Fluoro-Plastics technology makes it possible to make in-between sizes. Thickness tolerances range from .0005 for sizes from .002" thick to .005" thick up to .003" tolerance for material that is over .060" thick. Skived sheet... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Resins & Compounds: ExtrusionGrade
from Ensinger North America
TECASINT 2021 is a plastic reinforced with 15% graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear behavior. Thanks to its self lubricating property, TECASINT 2021 is well suited to lubricated and dry... [See More]
- Industry: Aerospace; Automotive; Sanitary; OEM or Industrial
- Deflection Temperature: 600
- Chemical System: Polyimide
- CTE: 23
from Fluoro-Plastics, Inc.
Extremely stiff and hard. High loading percentage (50% generally). Available in molded sheet only [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Filler: Metal or MIM
- Chemical System: Fluoropolymer
- Tensile (Break): 2500
from Ensinger North America
This injection moulded material is a Victrex PEEK polymer that has been modified with 30% carbon fibre to increase strength and rigidity. Stock shapes made from this material are handled under the tradename TECAPEEK IM CF30 black. Outer diameters range from 31,75 to 177,8 mm and inner diameters of... [See More]
- Industry: Aerospace; Automotive; OEM or Industrial
- Filler: Carbon or Graphite
- Chemical System: PEEK
- Deflection Temperature: 600
from Ensinger North America
Injection moulded stock shapes of a Victrex PEEK polymer, and 30% glass fibre are available under the tradename TECAPEEK IM GF30 natural. This modification provides increased strength and rigidity. The outer diameter of tubes made from this glass fibre reinforced PEEK vary between 31,75 mm to 177,8... [See More]
- Industry: Aerospace; Automotive; Electrical Power or High Voltage; Sanitary; OEM or Industrial
- Filler: Glass or FRP
- Chemical System: PEEK
- Deflection Temperature: 600
from Ensinger North America
TECAGLIDE black is an internally lubricated cast nylon that utilizes a proprietary solid lubricant package. This state of the art technology allows for extremely good sliding and wear characteristics, combined with high mechanical load properties. It is resistant to most petroleum based products,... [See More]
- Industry: Repair or Construction; OEM or Industrial
- Tensile (Break): 9200 to 12000
- Chemical System: Polyamide
- Tensile Modulus: 472 to 520
from Ensinger North America
TECAST L is an oil-filled cast nylon type 6 used in applications that require excellent bearing and wear properties, and where external lubrication is difficult or impractical. TECAST L has excellent wear and abrasion resistance, which results in extended component life and lower maintenance cost. [See More]
- Industry: Repair or Construction; OEM or Industrial
- Filler: Oil
- Chemical System: Polyamide
- Thermal Conductivity: 0.3707
from Ensinger North America
TECAPET black PET is the black pigmented version of our standard PET polyester. Among other excellent product features, Ensinger's TECAPET PET is also designed for improved machining properties. In addition, as a result of the black coloration, PET black also offers improved UV protection for... [See More]
- Industry: OEM or Industrial; Semiconductors or IC Packaging
- Thermal Conductivity: 0.2899
- Chemical System: Thermoplastic Polyester (PET, PBT, etc.)
- CTE: 39
from Ensinger North America
KYNAR ® PVDF is a highly chemically resistant crystalline thermoplastic. It is used extensively in the chemical processing industry by users looking for plastic chemical resistance. The material is also chosen because of its unique properties which include outstanding chemical and solvent... [See More]
- Industry: Sanitary; OEM or Industrial; Semiconductors or IC Packaging
- Deflection Temperature: 221 to 284
- Chemical System: Fluoropolymer
- Thermal Conductivity: 0.1702 to 0.1904
from Ensinger North America
DELRIN 511P is another Homopolymer acetal from DuPont that offers enhanced crystallization characteristics. This higher level of crystallization helps to augment aspects of the physical properties such as fatigue strength, stiffness, and creep resistance. Main Features: Good Machinability. High... [See More]
- Industry: Automotive; Electronics; Sanitary; Repair or Construction; OEM or Industrial
- Deflection Temperature: 325
- Chemical System: Acetal or Polyoxymethylene (POM)
- CTE: 68
from Ensinger North America
Delrin 100AF blend is a POM homopolymer with special PTFE fibers designed to optimize the material's sliding friction properties. The fibers are homogeneously distributed in the acetal material, which results in improved slide-friction performance and abrasion resistance, coupled with minimal... [See More]
- Industry: Automotive; OEM or Industrial
- Filler: PTFE Fibers
- Chemical System: Acetal or Polyoxymethylene (POM)
- Deflection Temperature: 244 to 334