Industrial Specialty Polymers and Resins
from AGC Chemicals Americas, Inc.
AFLAS ® fluor elastomers are the material of choice for parts and components that need to perform reliably in the world ’s harshest environments. AGC formulated AFLAS resins from alternating polymers of tetrafluoroethylene and propylene to achieve unique properties over a conventional... [See More]
- Industry: Automotive; Electrical Power or High Voltage; Sanitary; OEM or Industrial
- Chemical System: Fluor elastomer
- Material Type: Elastomer; MoldingCompound
- Use Temperature: 518
from Cri-Tech, Inc.
The LS, Low Shrinkage compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high... [See More]
- Industry: OEM or Industrial
- Chemical System: Fluoropolymer
- Material Type: Elastomer; MoldingCompound
- Tensile (Break): 2640
from Real Seal Company
Engineered Thermoset Rubber Components. Rubber has its own unique array of available materials and associated properties, and can be produced in almost any conceivable configuration, including bonding to metal components. Rubber materials possess some physical properties that are superior to many... [See More]
- Industry: Automotive; Repair or Construction; OEM or Industrial; Tooling
- Chemical System: Nitrile Rubber
- Material Type: Elastomer; Thermally cured; MoldingCompound
- Filler: Unfilled
from Wacker Chemical Corp.
SEMICOSIL ® 2M2M is Dimethoxydimethylsilane of high purity. Special features. high purity. low metal content. low chloride content. low methanol content. Application. SEMICOSIL ® 2M2M was developed for the semiconductor industry, e.g. as precursor for low dielectric constant interlayer... [See More]
- Industry: OEM or Industrial
- Chemical System: Silane
- Material Type: MoldingCompound
from Esprix Technologies
PRODUCT CHARACTERISTICS. KetoprixTM EKT23G3C3 and EKT23G3C2 resins are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also... [See More]
- Industry: Automotive; OEM or Industrial
- Chemical System: Aliphatic Polyketone Containing a 1,4-diketone Backbone Structure
- Material Type: Thermoplastic; MoldingCompound
- Filler: Fiber Reinforcement and Thermally Conductive Additives
from Ensinger North America
TECATRON GF40 natural is a 40% fiber glass reinforced material that combines very high mechanical properties as well as strength and rigidity, with excellent thermal properties. Furthermore, the high performance thermoplastic PPS with 40% glass fiber reinforcement offers excellent chemical... [See More]
- Industry: OEM or Industrial
- Chemical System: Polyphenylensulfide
- Material Type: Thermoplastic
- Filler: Glass or FRP
from Celanese Corporation
New Hostaform ® SlideX ™ POM from Celanese is an all-in-one, tribologically modified acetal copolymer (POM) compound with extremely low wear. It can greatly reduce wear rate friction and mechanical systems for industrial, transportation and consumer products sliding applications. With a... [See More]
- Industry: OEM or Industrial; Transportation and Consumer Products Sliding Applications
- Chemical System: Acetal or Polyoxymethylene (POM); Tribologically Modified Acetal Copolymer (POM) Compound
- Material Type: Thermoplastic
from 3M Advanced Materials Division
In 1969, astronauts boarded the Apollo 11 spacecraft wearing boots containing 3M ™ Dyneon ™ Fluoroelastomers. Today, these synthetic elastomeric materials are used in some of the toughest environments on earth. From hot-running automotive engines to harsh chemicals of semiconductor... [See More]
- Industry: Aerospace; Automotive; Electronics; Energy Conversion (Battery / Fuel Cell); Electrical Power or High Voltage; Marine; Sanitary; Military; Repair or Construction; OEM or Industrial; Semiconductors or IC Packaging; Oil &Gas Exploration
- Chemical System: Polypropylene; Polyamide; Fluoropolymer; Tertrafluoroethylene, Hexafluoropropylene
- Material Type: Elastomer; Thermoplastic; Thermally cured; ExtrusionGrade; FilmGrade; MoldingCompound; Optical
- Filler: Unfilled
from Ensinger North America
TECAPEEK ST black is a high temperature semi crystalline thermoplastic based on polyetherketonetherketoneketone (PEKEKK). TECAPEEK ST black is manufactured by Ensinger using VICTREX ST ™ polymer. Due to its high glass transition temperature, excellent mechanical properties can be observed,... [See More]
- Industry: Automotive; OEM or Industrial; Semiconductors or IC Packaging
- Chemical System: Polyetherketonetherketoneketone (PEKEKK)
- Material Type: Thermoplastic
- Filler: Glass or FRP