Specialty / Other Specialty Polymers and Resins
from Cri-Tech, Inc.
The LS, Low Shrinkage compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high... [See More]
- Chemical System: Fluoropolymer
- Industry: OEM or Industrial
- Material Type: Elastomer; MoldingCompound
- Tensile (Break): 2640
from Master Bond, Inc.
Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical/electronic/ structural applications. The two components are combined in a convenient noncritical mix... [See More]
- Chemical System: Epoxy; Cycloaliphatic, 100% Solids
- Filler: Unfilled
- Material Type: Thermally cured; CastingResin; Optical
- Industry: Electronics; Electrical Power or High Voltage; Optoelectronics or Photonics
from AGC Chemicals Americas, Inc.
Copolymers of tetrafluoroethylene and a perfluorinated vinyl ether, Fluon ® PFA Resins can be used over a wide range of temperatures from extremely low to high (-200 °C to 260 °C) without losing excellent chemical, electrical, mechanical and surface properties. PFA resins retain many... [See More]
- Chemical System: Fluoropolymer
- Filler: Unfilled
- Material Type: Thermoplastic; MoldingCompound
- Tensile (Break): 5655
from Mitsui Chemicals America, Inc.
ABSORTOMER ™ is a new olefin based polymer with molecular structure optimized at nano-meter level with the use of Mitsui Chemicals' long-cultivated catalyst technology. At low temperature, it has a hard feel and keep its shape. When heated, it changes to a soft, flexible feel. Absortomer is... [See More]
- Chemical System: Alpha-olefin copolymer
- Form / Shape: Pellets
- Material Type: Thermoplastic
from Master Bond, Inc.
Master Bond EP121CL is a two component, high performance epoxy resin system featuring high thermal stability, superior electrical insulation properties and outstanding dimensional stability for casting, sealing, potting, encapsulation and impregnation for service up to 450-500 °F. It cures... [See More]
- Chemical System: Epoxy; 100% Solids
- Filler: Unfilled
- Material Type: Thermally cured; CastingResin
- Industry: Electronics; Electrical Power or High Voltage; Optoelectronics or Photonics
from AGC Chemicals Americas, Inc.
AFLAS ® fluor elastomers are the material of choice for parts and components that need to perform reliably in the world ’s harshest environments. AGC formulated AFLAS resins from alternating polymers of tetrafluoroethylene and propylene to achieve unique properties over a conventional... [See More]
- Chemical System: Fluor elastomer
- Industry: Automotive; Electrical Power or High Voltage; Sanitary; OEM or Industrial
- Material Type: Elastomer; MoldingCompound
- Use Temperature: 518
from Mitsui Chemicals America, Inc.
Diffrar ™ is an optical grade polymer wafer that enhances the next generation of AR glasses. Diffrar ™ 's anticipated application is for optical waveguides. We believe that Diffrar ™ can contribute to improving the safety (high impact resistance) and significantly reducing the... [See More]
- Chemical System: Optical Grade Polymer
from AGC Chemicals Americas, Inc.
Asahi Glass has the unique position as a pharmaceutical and agrochemical intermediate producer with expertise in fluorine chemistry. Fluorinated compounds are known to possess bioactivity often considered useful, and our more than twenty years of experience in this area has furthered our technology... [See More]
- Chemical System: Fluoropolymer
- Features: BioMedical
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Chemical System: Fluoropolymer
- Filler: Unfilled
- Material Type: MoldingCompound
- Industry: Aerospace; Automotive; Laminating
from DuPont Plastics, Polymers & Resins
Zytel ®® PLS95G35DH1 BK031is a high flow 35% glass reinforced PA using SHIELD Technology, only from DuPont, combining excellent surface appearance, excellent welding and fatigue retention, exceptional resistance in hot air & hot engine oil. The Breakthrough Plastic that Won ’t Break... [See More]
- Chemical System: PA-GF35
- Material Type: Thermoplastic
from MCG - Performance Polymers Division
BIO BASE ENGINEERING POLYMER. DURABIO ™ combines most of the advantageous properties of Polycarbonate (PC) and those of the Polymethacrylate (PMMA), with additionally the bio origin of raw material. KEY FEATURES. Excellent optical and mechanical properties. Superb light transmission and... [See More]
- Chemical System: Isosorbide
- Industry: Automotive; Electronics
- Material Type: Elastomer; FilmGrade; Optical
from Eastman Chemical Company
Tenite ™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite ™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder... [See More]
- Chemical System: Butyrate
- Tensile (Break): 5700
from Wacker Chemical Corp.
SEMICOSIL ® 2M2M is Dimethoxydimethylsilane of high purity. Special features. high purity. low metal content. low chloride content. low methanol content. Application. SEMICOSIL ® 2M2M was developed for the semiconductor industry, e.g. as precursor for low dielectric constant interlayer... [See More]
- Chemical System: Silane
- Industry: OEM or Industrial
- Material Type: MoldingCompound
from Esprix Technologies
PRODUCT CHARACTERISTICS. KetoprixTM EKT23G3C3 and EKT23G3C2 resins are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also... [See More]
- Chemical System: Aliphatic Polyketone Containing a 1,4-diketone Backbone Structure
- Filler: Fiber Reinforcement and Thermally Conductive Additives
- Material Type: Thermoplastic; MoldingCompound
- Industry: Automotive; OEM or Industrial
from Greene, Tweed & Co.
FFKM, also known as perfluoroelastomer, is a family of elastomeric materials that contains higher amounts of fluorine than FKM, and features higher temperature ratings, up to approximately 325 °C. For this reason, FFKM is often the preferred choice for high-temperature o-rings. FFKMs also have... [See More]
- Chemical System: Fluoropolymer; Perfluoroelastomer
- Industry: Aerospace; Electrical Power or High Voltage; Semiconductors or IC Packaging
- Material Type: Elastomer
- Use Temperature: -40 to 615
from Techsil Limited
BJB TC800 is a rigid urethane casting material with excellent physical properties. It is a great choice when ABS-type parts with a quick turnaround are required. Product Benefits. Easy to use 1:1 mix ratio. Very low viscosity. High heat capability. Quick demold times. Non-mercury based catalyst... [See More]
- Chemical System: Urethane
- Material Type: CastingResin
from 3M Advanced Materials Division
Through 3M's Thermoplastic Compounding facility in Hebron, KY, customers have the ability to create formulations geared to providing specific properties or funtions which are not inherent in the base resin. Enhancements can range from making the base polymer easy to extrude, to adding properties... [See More]
- Chemical System: Polypropylene; Polyamide; PEEK; Polyphenylene Oxide; Polyurethane; Polyetherimide; Polyetheretherketone
- Filler: Glass Bubbles
- Material Type: Thermoplastic; ExtrusionGrade
- Form / Shape: Pellets
from Scientific Polymer Products, Inc.
7% cis 1,4; 93% vinyl 1,2 [See More]
- Chemical System: 1,2-Polybutadiene
- Index of Refraction: 1.52
from Polyplastics USA, Inc.
TOPAS ® is the trade name of a cyclic olefin copolymer (COC) developed by TOPAS ADVANCED POLYMERS GmbH, it is an amorphous transparent copolymer possessing a cyclic olefin structure. TOPAS ® has been evaluated highly in the market as a resin with optical properties comparable with PMMA... [See More]
- Chemical System: Cyclic Olefin Copolymer (COC)
- Filler: Unfilled
- Material Type: Thermoplastic; MoldingCompound
- Deflection Temperature: 261
from Celanese Corporation
New Hostaform ® SlideX ™ POM from Celanese is an all-in-one, tribologically modified acetal copolymer (POM) compound with extremely low wear. It can greatly reduce wear rate friction and mechanical systems for industrial, transportation and consumer products sliding applications. With a... [See More]
- Chemical System: Acetal or Polyoxymethylene (POM); Tribologically Modified Acetal Copolymer (POM) Compound
- Industry: OEM or Industrial; Transportation and Consumer Products Sliding Applications
- Material Type: Thermoplastic
from Real Seal Company
Engineered Thermoset Rubber Components. Rubber has its own unique array of available materials and associated properties, and can be produced in almost any conceivable configuration, including bonding to metal components. Rubber materials possess some physical properties that are superior to many... [See More]
- Chemical System: Nitrile Rubber
- Filler: Unfilled
- Material Type: Elastomer; Thermally cured; MoldingCompound
- Form / Shape: Pellets
from Toray Industries (America), Inc.
ECODEAR ® is based on polylactic acid (PLA) derived from plants, rather than petroleum and other fossil resources. This means that it can readily be returned to the natural environment after use. ECODEAR ® is an environment-friendly product that helps to conserve fossil resources and reduce... [See More]
- Chemical System: Polylactic Acid
- Material Type: Thermoplastic; MoldingCompound
from Ensinger North America
TECANYL VH2 black is a specially formulated PPE plastic (Polyphenylene ether) designed for use in commercial aircraft interiors. It has been tested to and passed the requirements for FAR 25.853, as well as specific customer specifications for interior cabin products. The material's favorable flame... [See More]
- Chemical System: Polyphenylene Ether (PPE)
- Industry: Aerospace
- Material Type: Thermoplastic
- Deflection Temperature: 252
from Rieke Metals, Inc.
Poly(3-butylthiophene-2,5-diyl), Highly regioregular Electronic Grade. Typical results are between 80% and 90% regioregularity. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn / < 0.7%... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Henkel Corporation - Electronics
Henkel's TECHNOMELT product family is diverse and versatile. No matter the application or market, there is a TECHNOMELT material for you. Despite containing features specific to particular applications, all TECHNOMELT materials provide the same common benefits, including watertight encapsulation,... [See More]
- Chemical System: Polyolefin
- Form / Shape: Pellets
- Material Type: Thermoplastic; MoldingCompound
- Features: UL; Thermally Conductive
from LG Chemical of America Inc.
EPC Engineering Plastic Compound. Highly-functional engineering plastic whose properties have been. enhanced with compounding. Engineering plastic is lighter yet stronger than general plastics. Thus, it is used as an industrial material for automobiles and electronic parts. EPC is a... [See More]
- Chemical System: Engineered Plastic Compound
- Material Type: Thermoplastic; MoldingCompound
from CSP Technologies, Inc.
CSP Technologies Activ-FilmTM materials enhance product stability in ways that are invisible to consumers and more efficient for manufacturers. The flexible materials are ideal for use in applications like foil pouches, stick packs and blister packs in industries such as Pharmaceutical, Diagnostic,... [See More]
- Chemical System:
- Industry: Sanitary
- Material Type: FilmGrade
from Techsil Limited
BJB TC800 is a rigid urethane casting material with excellent physical properties. It is a great choice when ABS-type parts with a quick turnaround are required. Product Benefits. Easy to use 1:1 mix ratio. Very low viscosity. High heat capability. Quick demold times. Non-mercury based catalyst... [See More]
- Chemical System: Urethane
- Material Type: CastingResin
from 3M Advanced Materials Division
In 1969, astronauts boarded the Apollo 11 spacecraft wearing boots containing 3M ™ Dyneon ™ Fluoroelastomers. Today, these synthetic elastomeric materials are used in some of the toughest environments on earth. From hot-running automotive engines to harsh chemicals of semiconductor... [See More]
- Chemical System: Polypropylene; Polyamide; Fluoropolymer; Tertrafluoroethylene, Hexafluoropropylene
- Filler: Unfilled
- Material Type: Elastomer; Thermoplastic; Thermally cured; ExtrusionGrade; FilmGrade; MoldingCompound; Optical
- Form / Shape: Liquid; Pellets
from Toray Industries (America), Inc.
Toray's high-performance engineering plastic TORELINA ® resin boasts excellent heat resistance, flame retardancy and chemical resistance, physical strength, and its superb fluidity leads to outstanding dimensional precision. These characteristics make it ideal for a wide range of applications:... [See More]
- Chemical System: Polyphenyline Sulfide
- Features: Flame Retardant
- Material Type: Thermoplastic; MoldingCompound
- Industry: Automotive; Electronics
from Ensinger North America
TECATRON GF40 natural is a 40% fiber glass reinforced material that combines very high mechanical properties as well as strength and rigidity, with excellent thermal properties. Furthermore, the high performance thermoplastic PPS with 40% glass fiber reinforcement offers excellent chemical... [See More]
- Chemical System: Polyphenylensulfide
- Filler: Glass or FRP
- Material Type: Thermoplastic
- Industry: OEM or Industrial
from Rieke Metals, Inc.
Poly(3-hexylthiophene-2,5-diyl ),Highly regioregular Electronic Grade. Typical results are between 90% and 93% regioregularity.. P3HT. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn /... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Henkel Corporation - Electronics
Henkel's TECHNOMELT product family is diverse and versatile. No matter the application or market, there is a TECHNOMELT material for you. Despite containing features specific to particular applications, all TECHNOMELT materials provide the same common benefits, including watertight encapsulation,... [See More]
- Chemical System: Polyolefin
- Form / Shape: Pellets
- Material Type: Thermoplastic; MoldingCompound
- Features: UL; Thermally Conductive
from Techsil Limited
BJB TC800 is a rigid urethane casting material with excellent physical properties. It is a great choice when ABS-type parts with a quick turnaround are required. Product Benefits. Easy to use 1:1 mix ratio. Very low viscosity. High heat capability. Quick demold times. Non-mercury based catalyst... [See More]
- Chemical System: Polyurethane; Urethane
- Material Type: CastingResin
from Ensinger North America
PPE GF30 is a special 30% glass fibre reinforced product which is manufactured by Ensinger under the trade name TECANYL GF30. In comparison to unfilled TECANYL, the glass filled modification demonstrates optimized properties in a number of areas. It has a high rigidity, high mechanical strength,... [See More]
- Chemical System: Polyphenylene Ether (PPE)
- Filler: Glass or FRP
- Material Type: Thermoplastic
- Industry: Automotive; Electronics; Electrical Power or High Voltage
from Rieke Metals, Inc.
Poly(3-hexylthiophene-2,5-diyl ),Highly regioregular Electronic Grade. Typical results are between 90% and 93% regioregularity.. P3HT. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn /... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
BJB TC803 is a rigid urethane casting material with excellent physical properties. It is suitable for a wide variety of part making applications and is an excellent choice for vacuum or pressure casting. Product Benefits. Low viscosity. RoHS/REACH Compliant. Technical Properties. Work Time: 6 - 7... [See More]
- Chemical System: Urethane
- Material Type: CastingResin
from Ensinger North America
TECASON P MT black is a polyphenylsulfone suited primarily to applications in the medical industry. PPSU medical grade material has improved performance in terms of temperature, impact strength and chemical resistance, and shows exceptional resistance to repeated steam autoclaving without loss of... [See More]
- Chemical System: Polyphenylsulfone
- Industry: Sanitary
- Material Type: Thermoplastic
- Deflection Temperature: 405 to 417
from Rieke Metals, Inc.
Poly(3-octylthiophene-2,5-diyl ), Highly regioregular Electronic Grade. Typical results are between 90% and 93% regioregularity. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn / < 0.7%... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
BJB TC803 is a rigid urethane casting material with excellent physical properties. It is suitable for a wide variety of part making applications and is an excellent choice for vacuum or pressure casting. Product Benefits. Low viscosity. RoHS/REACH Compliant. Technical Properties. Work Time: 6 - 7... [See More]
- Chemical System: Urethane
- Material Type: CastingResin
from Ensinger North America
#8203;TECASON P MT blue is suitable for use in medical applications. In many medical applications, it is often desirable for designers to have a number colors to choose from when making material selection decisions. TECASON P MT blue is just one of the many color options available in this family of... [See More]
- Chemical System: Polyphenylsulfone
- Industry: Sanitary
- Material Type: Thermoplastic
- Deflection Temperature: 405 to 417
from Rieke Metals, Inc.
Poly(3-octylthiophene-2,5-diyl ), Highly regioregular Electronic Grade. Typical results are between 90% and 93% regioregularity. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn / < 0.7%... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
BJB TC808 is a rigid urethane casting material with rapid setting qualities. This system quickly cures to a hard, tough casting and is generally insensitive to moisture during and after cure. TC-808 will readily bond to itself during stage pours, if required. It is recommended in applications where... [See More]
- Chemical System: Polyurethane; Urethane
- Material Type: CastingResin
from Ensinger North America
TECASON P MT bone is suitable for use in medical applications. In many medical applications, it is often desirable for designers to have a number colors to choose from when making material selection decisions. TECASON P MT bone is just one of the many color options available in this family of... [See More]
- Chemical System: Polyphenylsulfone
- Industry: Sanitary
- Material Type: Thermoplastic
- Deflection Temperature: 405 to 417
from Rieke Metals, Inc.
Poly(3-decylthiophene-2,5-diyl ), Highly regioregular Electronic Grade. Typical results are between 90% and 93% regioregularity. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn / < 0.7%... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
BJB TC808 is a rigid urethane casting material with rapid setting qualities. This system quickly cures to a hard, tough casting and is generally insensitive to moisture during and after cure. TC-808 will readily bond to itself during stage pours, if required. It is recommended in applications where... [See More]
- Chemical System: Urethane
- Material Type: CastingResin
from Ensinger North America
TECASON P MT grey is suitable for use in medical applications. In many medical applications, it is often desirable for designers to have a number colors to choose from when making material selection decisions. TECASON P MT grey is just one of the many color options available in this family of... [See More]
- Chemical System: Polyphenylsulfone
- Industry: Sanitary
- Material Type: Thermoplastic
- Deflection Temperature: 405 to 417
from Rieke Metals, Inc.
Poly(3-dodecylthiophene-2,5-diyl), Highly regioregular Electronic Grade. Typical results are between 90% and 93% regioregularity. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn / <... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
DETAILS. BJB TC808 is a rigid urethane casting material with rapid setting qualities. This system quickly cures to a hard, tough casting and is generally insensitive to moisture during and after cure. TC-808 will readily bond to itself during stage pours, if required. It is recommended in... [See More]
- Chemical System: Urethane
- Material Type: CastingResin
from Ensinger North America
TECASON P MT red is suitable for use in medical applications. In many medical applications, it is often desirable for designers to have a number colors to choose from when making material selection decisions. TECASON P MT red is just one of the many color options available in this family of... [See More]
- Chemical System: Polyphenylsulfone
- Industry: Sanitary
- Material Type: Thermoplastic
- Deflection Temperature: 405 to 417
from Rieke Metals, Inc.
poly(3-butylthiophene-2,5-diyl ),regiorandom [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
RoHS/REACH Compliant. Technical Properties. Work Time:5 minutes. Demold Time: 1 -2 hours. Shore Hardness: 85 Shore D [See More]
- Chemical System: Polyurethane; Urethane
- Material Type: CastingResin
from Ensinger North America
TECASON P MT yellow is suitable for use in medical applications. In many medical applications, it is often desirable for designers to have a number colors to choose from when making material selection decisions. TECASON P MT yellow is just one of the many color options available in this family of... [See More]
- Chemical System: Polyphenylsulfone
- Industry: Sanitary
- Material Type: Thermoplastic
- Deflection Temperature: 405 to 417
from Rieke Metals, Inc.
poly(3-hexylthiophene-2,5-diyl ),regiorandom [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
BJB TC-880 is a rigid urethane casting material with excellent physical properties. It is a great choice when ABS-type parts with a quick turnaround are required. Product Benefits. Translucent, easy to pigment. Low viscosity. high impact. Similar to ABS. Non-mercury based catalyst system. RoHS/REACH... [See More]
- Chemical System: Polyurethane; Urethane
- Material Type: CastingResin
from Ensinger North America
Through TECATRON PVX black, Ensinger offers a filled PPS (PPS CS CF TF), which is a specially modified for use in sliding applications. The material contains 10% each of PTFE, graphite and carbon fibers which are added to the PPS to facilitate bearing and wear applications. The additives of the PPS... [See More]
- Chemical System: Polyphenylensulfide
- Filler: Carbon or Graphite
- Material Type: Thermoplastic
- Industry: Aerospace; Automotive
from Rieke Metals, Inc.
poly(3-octylthiophene-2,5-diyl ),regiorandom [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
BJB TC-880 is a rigid urethane casting material with excellent physical properties. It is a great choice when ABS-type parts with a quick turnaround are required. Product Benefits. Translucent, easy to pigment. Low viscosity. high impact. Similar to ABS. Non-mercury based catalyst system. RoHS/REACH... [See More]
- Chemical System: Polyurethane; Urethane
- Material Type: CastingResin
from Ensinger North America
This compression molded PPS material is modified with 40% glass fibers for increased strength and stiffness. High dimensional stability. Good chemical resistance. High creep resistance. Good heat deflection temperature. Resistance against high energy radiation. High stiffness. High strength. Target... [See More]
- Chemical System: Polyphenylensulfide
- Filler: Glass or FRP
- Material Type: Thermoplastic
- Tensile (Break): 6200
from Rieke Metals, Inc.
poly(3-decylthiophene-2,5-diyl ),regiorandom [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Techsil Limited
Techsil ® 6098L Aerosol is a solvent based release agent used for a variety of molded urethane applications. It is recommended for rigid and semi rigid foam applications. Techsil ® 6098L Aerosol provides excellent release and good surface finish on the finished part for most urethane... [See More]
- Chemical System: Urethane
from Ensinger North America
This polyphenylensulfide (PPS) is a high performance thermoplastic designed specifically for semiconductor applications. It combines good mechanical properties with excellent thermal and chemical resistance properties, and is manufactured by Ensinger under the tradename TECATRON SE. Its low ionic... [See More]
- Chemical System: Polyphenylensulfide
- Industry: Semiconductors or IC Packaging
- Material Type: Thermoplastic
- Deflection Temperature: 239 to 320
from Rieke Metals, Inc.
poly(3-dodecylthiophene-2,5-diyl ),regiorandom [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Ensinger North America
TECAPEEK ST black is a high temperature semi crystalline thermoplastic based on polyetherketonetherketoneketone (PEKEKK). TECAPEEK ST black is manufactured by Ensinger using VICTREX ST ™ polymer. Due to its high glass transition temperature, excellent mechanical properties can be observed,... [See More]
- Chemical System: Polyetherketonetherketoneketone (PEKEKK)
- Filler: Glass or FRP
- Material Type: Thermoplastic
- Industry: Automotive; OEM or Industrial; Semiconductors or IC Packaging
from Rieke Metals, Inc.
polythiophene-2,5-diyl. Please contact us at sales@riekemetals.com for ordering and bulk pricing. Our products are available in an electronic database in either .db or .sd formats. Highly regioregular (98.5% or higher) as well as the regiorandom (1:1:1:1) poly(3-alkylthiophene-2,5-diyl) polymers... [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly(3-pentylthiophene-2,5-diyl), Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly(3-heptylthiophene-2,5-diyl), Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly[3-(ethyl-4-butanoate)thiophene-2,5-diyl], Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly[3-(potassium-4-butanoate)thiophene-2,5-diyl], Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly[3-(potassium-5-pentanoate)thiophene-2,5-diyl], Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly[3-(ethyl-5-pentanoate)thiophene-2,5-diyl],Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid
from Rieke Metals, Inc.
Poly[3-(potassium -6-hexanoate)thiophene-2,5-diyl], Highly regioregular. Typical results are between 90% and 93% regioregularity. [See More]
- Chemical System:
- Filler: Unfilled
- Material Type: Thermoplastic
- Form / Shape: Liquid