Plastic Ball Bearings
from RS Components, Ltd.
BNL CM6202/4N/D Ball Bearing [See More]
- Material / Plating: Plastic; Plastic
- Design Units: Metric
- Primary Bearing Category: Radial Ball Bearing
- Bore: 0.5906
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.3740
- Design Units: Metric
- Outside Diameter: 0.7480 to 0.9449
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Material / Plating: Plastic
- Dynamic Axial: 92
- Application: Pump
- Rolling Element: Stainless Steel
from RS Components, Ltd.
BNL AC6302Z-ISB/4N/D Ball Bearing [See More]
- Material / Plating: Plastic; Plastic
- Design Units: Metric
- Primary Bearing Category: Radial Ball Bearing
- Bore: 0.5906
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.5709
- Design Units: Metric
- Outside Diameter: 0.7087 to 1.3780
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Material / Plating: Plastic
- Design Units: Inch
- Application: Pump
- Bore: 0.2500
from RS Components, Ltd.
FAG 1205-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 2.0472
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3543 to 0.6693
- Design Units: Metric
- Outside Diameter: 0.8661 to 1.3780
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Material / Plating: Plastic
- Design Units: Metric
- Application: Pump
- Bore: 0.3937
from RS Components, Ltd.
FAG 1204-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.7874
- Design Units: Metric
- Outside Diameter: 1.8504
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Grease: 3000
- Design Units: Metric
- Rolling Element: Steel
from RS Components, Ltd.
FAG 2202-2RS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.5906
- Design Units: Metric
- Outside Diameter: 1.3780
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.6575 to 2.3032
- Design Units: Metric
- Outside Diameter: 1.1024 to 3.1496
from RS Components, Ltd.
FAG 2203-2RS-TVH [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.6693
- Design Units: Metric
- Outside Diameter: 1.5748
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.5709 to 1.8504
- Design Units: Metric
- Outside Diameter: 1.0236 to 3.1496
from RS Components, Ltd.
FAG 2204-2RS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.7874
- Design Units: Metric
- Outside Diameter: 1.8504
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.3740
- Design Units: Metric
- Outside Diameter: 0.7480 to 1.5748
from RS Components, Ltd.
FAG 2205-2RS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 2.0472
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480 to 0.8661
from RS Components, Ltd.
FAG 2206-2RS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 1.1811
- Design Units: Metric
- Outside Diameter: 2.4409
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228
- Design Units: Metric
- Outside Diameter: 0.7480
from RS Components, Ltd.
FAG 2207-2RS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 1.3780
- Design Units: Metric
- Outside Diameter: 2.8346
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.2047 to 0.4724
- Design Units: Metric
- Outside Diameter: 0.4724 to 1.3780
from RS Components, Ltd.
FAG 3204-BD-XL-2HRS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.7874
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 1.0630
- Design Units: Metric
- Outside Diameter: 0.7480 to 1.3780
from RS Components, Ltd.
FAG 3205-BD-XL-2HRS-TVH [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.9843
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.2126 to 1.0630
- Design Units: Metric
- Outside Diameter: 0.3543 to 1.8504
from RS Components, Ltd.
FAG 3206-BD-XL-2HRS-TVH [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 1.1811
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.5709
- Design Units: Metric
- Outside Diameter: 0.7480 to 1.3386
from RS Components, Ltd.
FAG 3208-BD-XL-2HRS-TVH Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 1.5748
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.5709
- Design Units: Metric
- Outside Diameter: 0.7480 to 1.5748
from RS Components, Ltd.
FAG 7204-B-XL-TVP [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.7874
from TOK America, Inc.
TOK offers a wide range of uniquely featured bearings, including resin bearings, conductive bearings, water-resistant bearings, high-toughness bearings, non-magnetic bearings, chemical-resistant bearings, urethane bearings, and ceramic bearings. In particular, the variety of resin bearings is... [See More]
- Material / Plating: Plastic
- Bore: 0.3228 to 0.3740
- Design Units: Metric
- Outside Diameter: 0.7480 to 1.4961
from RS Components, Ltd.
FAG 7205-B-XL-TVP [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.9843
from RS Components, Ltd.
FAG 7206-B-XL-TVP [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 1.1811
from RS Components, Ltd.
FAG 7207-B-XL-TVP Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 1.3780
from RS Components, Ltd.
INA 3001-2RS Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.4724
from RS Components, Ltd.
INA 3004-2RS Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.7874
from RS Components, Ltd.
INA 3005-2RS Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 0.9843
from RS Components, Ltd.
INA 3007-2RS Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Design Units: Metric
- Primary Bearing Category: Angular Contact Ball Bearing
- Bore: 1.3780
from RS Components, Ltd.
INA KH10-PP Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.6693
from RS Components, Ltd.
INA KH40-PP Ball Bearing [See More]
- Material / Plating: Plastic; Steel
- Bore: 1.5748
- Design Units: Metric
- Outside Diameter: 2.0472
from RS Components, Ltd.
SNR 2202EEG15 Ball Bearing [See More]
- Material / Plating: Plastic; Polyamide
- Bore: 0.5906
- Design Units: Metric
- Outside Diameter: 1.3780
from BNB INT. Co., Ltd.
Alumina bearings are manufactured mainly at 99% or higher purity, with good corrosion and chemical resistance. It has excellent high-temperature resistance, electric insulation, hardness, and wear resistance. [See More]
- Material / Plating: Plastic; Ceramic Races
- Application: Semiconductor equipment, LCD equipment, Insulation equipment, Chemical Facilities
- Primary Bearing Category: Radial Ball Bearing
- Rolling Element: Ceramic Balls
from igus® inc.
Features. Maintenance- and lubrication-free. For temperatures up to 302 ° F. Corrosion resistant. Non-magnetic and washable. Chemical resistant. FDA compliant. Predictable lifetime. Lightweight. For 3-20 mm shaft diameter [See More]
- Material / Plating: Plastic
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from NSK Americas
NSK offers one of the most comprehensive range of Angular Contact Ball Bearings designed to meet OE manufacturers' demanding requirements. These bearings have a contact angle that enables them to withstand significant axial loads in one direction together with radial loads. They are generally used... [See More]
- Material / Plating: Stainless Steel; Plastic
- Type: Double Row Angular Contact (optional feature) Double Row Maximum Complement Angular (optional feature) Four Point Contact (optional feature)
- Primary Bearing Category: Angular Contact Ball Bearing
- Description: Sealed Angular Contact, Duplex Angular Contact
from RegalRexnord
Product Family: Ball Bearing; Line: Link-Belt Mounted [See More]
- Material / Plating: Plastic
- Lubrication: Prelubricated; Relubricatable
- Seals / Shields: Single Seal
- Features: Flanged
from Magnus Mobility Systems, Inc.
Not all bearings are created equal. It takes tough bearings to withstand a wet, corrosive environment - and we've got 'em! Our plastic bearings are lightweight - they will go where no conventional bearing can. Engineered using materials specially matched to your application - Acetal, Nylon,... [See More]
- Material / Plating: Plastic
- Type: Internal Self Aligning
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from Quality Bearings & Components
Plastic Raceways. FLANGED CONVEYOR BALL BEARINGS – INCH. • Polypropylene. • Hex Bore. • 316 Stainless Steel Balls. NOTE: Items with 7/16 Hex Bore can be manufactured with 1/2 Dia. Bore on special order. [See More]
- Material / Plating: Plastic
- Design Units: Inch
- Primary Bearing Category: Radial Ball Bearing
- Bore: 0.3125
from IBT Industrial Solutions
Industrial bearings have been a mainstay of the IBT Industrial Solutions business from the very beginning, when IBT was founded in Kansas City in 1949. With this legacy of service, you can be confident that you are working with the pros when you partner with IBT. Whether you are replacing an... [See More]
- Material / Plating: Plastic
- Rolling Element: Polymer
from Reid Supply
Ball bearings are capable of rotational speeds that exceed the limits of a plain bearing. Available in sealed, shielded, metal, non-metal and open versions. . NNB-01 [See More]
- Material / Plating: Plastic; Plastic w/Stainless Steel Balls
- Outside Diameter: 0.5000
- Bore: 0.1880
- Outer Ring Width: 0.1560
from Boca Bearings Company
Needle Bearings Common Sizes [See More]
- Material / Plating: Plastic; COLD STEEL SHEETST12
- Design Units: Metric
- Description: Needle Bearings Common Sizes
- Bore: 0.1181
from KMS Bearings, Inc.
KMS produces radial type ball bearings with plastic raceways fitted with either SS316 or glass balls in standard industrial sizes. Features and Advantages. Inch and metric sizes. Corrosion resistant. No-lube. Light weight - low start up torque. Hygienic. Can run in liquids. Non-magnetic. List price... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
A ceramic bearing is suitable for any environment in which wear, corrosion, thermal resistance, and electric insulation are required, so metal bearings are not suitable. Corrosion Resistance Applicable in strong acid, alkali, and sea water. Wear resistance High hardness and wear resistance. [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races
- Application: Any environment in which wear, corrosion, thermal resistance, and electric insulation are required
- Primary Bearing Category: Radial Ball Bearing
- Rolling Element: Ceramic Balls
from igus® inc.
Features. Lubrication and maintenance-free. Non-magnetic and washable. Corrosion-resistant. Predictable lifetime. Lightweight. For 3-60 mm shaft diameters. Electrically insulating [See More]
- Material / Plating: Plastic
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from NSK Americas
NSK ’s Aqua Bearings feature a special fluororesin outer/inner rings with balls and cages equipped to meet a broad range of light load applications in water, alkali and strong acid environments. Condition Description. Arduous Environments. Corrosive Environment. Benefits. Special... [See More]
- Material / Plating: Plastic
- Description: Fluororesin Outer/Inner Rings
- Primary Bearing Category: Radial Ball Bearing
- Application: Chemical and Pharmaceutical, Food and Beverage, Semiconductor
from RegalRexnord
Product Family: Ball Bearing; Line: Link-Belt Mounted [See More]
- Material / Plating: Plastic
- Dynamic Axial: 3380
- Static Axial: 2530
- Seals / Shields: Single Seal
from Magnus Mobility Systems, Inc.
Not all bearings are created equal. It takes tough bearings to withstand a wet, corrosive environment - and we've got 'em! Our plastic bearings are lightweight - they will go where no conventional bearing can. Engineered using materials specially matched to your application - Acetal, Nylon,... [See More]
- Material / Plating: Plastic
- Type: Flat Race Thrust
- Primary Bearing Category: Thrust Bearing
- Design Units: Inch
from Quality Bearings & Components
Plastic Raceways. PLAIN BALL BEARINGS – INCH. • Acetal Raceways. • Glass or 316 Stainless Steel Balls [See More]
- Material / Plating: Plastic
- Design Units: Inch
- Primary Bearing Category: Radial Ball Bearing
- Bore: 0.6250
from Boca Bearings Company
Angular Contact Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Description: Angular Contact Bearings
- Primary Bearing Category: Angular Contact Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
KMS produces radial type ball bearings with plastic raceways fitted with either SS316 or glass balls in standard industrial sizes. Features and Advantages. Inch and metric sizes. Corrosion resistant. No-lube. Light weight - low start up torque. Hygienic. Can run in liquids. Non-magnetic. List price... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
Customizable Design and Production. Our bearing products are customizable for different environments. We can manufacture ceramic bearings for clean and vacuum environments as well as marine and chemical equipment. These bearings include those for hot environments (1000 °C or higher);. plastic... [See More]
- Material / Plating: Stainless Steel; Plastic
- Primary Bearing Category: Radial Ball Bearing
from igus® inc.
The xiros ® C160 material used for ball bearings is highly media-resistant yet, at the same time, low cost. xiros ® C160 can be used in the temperature range of up to +176 °F. Lubrication-, maintenance-free. Corrosion- and chemical-resistant. Non-magnetic and washable. Predictable... [See More]
- Material / Plating: Plastic
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from RegalRexnord
Product Family: Ball Bearing; Line: Link-Belt Mounted [See More]
- Material / Plating: Plastic
- Static Axial: 3440
- Outside Diameter: 3.6562
- Dynamic Axial: 4470
from Magnus Mobility Systems, Inc.
Jilson Bearing Housings – made of high-grade solid PBT thermoplastic polyester – are the durable, corrosion-resistant replacement for conventional metal housings. These maintenance-free housings have excellent mechanical strength, stiffness and dimensional stability – and they... [See More]
- Material / Plating: Plastic
- Application: Ball Screw Support
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from Quality Bearings & Components
Plastic Raceways. PLAIN BALL BEARINGS – METRIC. • Acetal Raceways. • Glass or 316 Stainless Steel Balls [See More]
- Material / Plating: Plastic
- Design Units: Metric
- Primary Bearing Category: Radial Ball Bearing
- Bore: 0.2362
from Boca Bearings Company
Angular Contact Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Angular Contact Bearings
- Primary Bearing Category: Angular Contact Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
KMS produces radial type ball bearings with plastic raceways fitted with either SS316 or glass balls in standard industrial sizes. Features and Advantages. Inch and metric sizes. Corrosion resistant. No-lube. Light weight - low start up torque. Hygienic. Can run in liquids. Non-magnetic. List price... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
Anticorrosive HDPE Bearing. HDPE has good hardness for rapidly increasing heat and is widely used for contacting hot liquid, with excellent acid resistance. It has great electric insulation and weldability. Advantages. It has good workability and wear resistance. It is nontoxic and chemically... [See More]
- Material / Plating: Plastic
- Rolling Element: Stainless Steel; Ceramic Balls; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -40 to 230
from Magnus Mobility Systems, Inc.
Not all bearings are created equal. It takes tough bearings to withstand a wet, corrosive environment - and we've got 'em! Our plastic bearings are lightweight - they will go where no conventional bearing can. Engineered using materials specially matched to your application - Acetal, Nylon,... [See More]
- Material / Plating: Plastic
- Type: Internal Self Aligning
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from Quality Bearings & Components
Plastic Raceways. PLAIN BALL BEARINGS-SINGLE & DOUBLE ROW – INCH. • Acetal. • 316 Stainless Steel Balls. NOTES: 1. These are replacement bearings for plastic mounting and pillow blocks. 2. Insert bearings also available with 316 stainless steel raceways,. on special order. [See More]
- Material / Plating: Plastic
- Design Units: Inch
- Primary Bearing Category: Radial Ball Bearing
- Bore: 1.0000
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
KMS produces radial type ball bearings with plastic raceways fitted with either SS316 or glass balls in standard industrial sizes. Features and Advantages. Inch and metric sizes. Corrosion resistant. No-lube. Light weight - low start up torque. Hygienic. Can run in liquids. Non-magnetic. List price... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
Metal, plastic, and ceramic can be mixed to design and manufacture bearings customized for the hot environment, corrosion and wear resistance, allowed load, and rpm. It can cover the disadvantages of ceramic and metal bearings and is customizable for working environments to guarantee high service... [See More]
- Material / Plating: Stainless Steel; Plastic
- Application: Medical / Dental; Semiconductor equipment, LCD equipment, Food equipment, Plating facility, Chemical Facilities, Medical facilities
- Primary Bearing Category: Radial Ball Bearing
- Rolling Element: Ceramic Balls
from Magnus Mobility Systems, Inc.
Not all bearings are created equal. It takes tough bearings to withstand a wet, corrosive environment - and we've got 'em! Our plastic bearings are lightweight - they will go where no conventional bearing can. Engineered using materials specially matched to your application - Acetal, Nylon,... [See More]
- Material / Plating: Plastic
- Type: Internal Self Aligning
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from Quality Bearings & Components
Plastic Raceways. PLAIN BALL BEARINGS-DOUBLE ROW – INCH/METRIC. • Acetal Raceways. • Glass or 316 Stainless Steel Balls [See More]
- Material / Plating: Plastic
- Type: Double Row Angular Contact
- Primary Bearing Category: Angular Contact Ball Bearing
- Design Units: Inch
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
produces Insert type bearings to fit KMS ’ mounted blocks as well as to fit standard industrial blocks. KMS ’ selection covers all application requirements. Use for superior corrosion resistance, low speed and load, low torque, no lube applications. Load and speed calculations are for... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from BNB INT. Co., Ltd.
Wear-resistant and Anticorrosive PCTFE Bearing. PCTFE is one of the widely used fluoroplastics. It has good chemical resistance and low friction factor and can work stably in a wide range of temperatures (even under low temperatures). Therefore, it is widely used for machine parts and equipment... [See More]
- Material / Plating: Plastic
- Rolling Element: Ceramic Balls
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -40 to 230
from Magnus Mobility Systems, Inc.
Not all bearings are created equal. It takes tough bearings to withstand a wet, corrosive environment - and we've got 'em! Our plastic bearings are lightweight - they will go where no conventional bearing can. Engineered using materials specially matched to your application - Acetal, Nylon,... [See More]
- Material / Plating: Plastic
- Type: Wide Inner Ring Internal Self Aligning
- Primary Bearing Category: Radial Ball Bearing
- Application: Automotive; Sporting and Consumer Goods; Food and Beverage, Pharmaceutical
from Boca Bearings Company
Machine Tool Spindle Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Design Units: Metric
- Description: Machine Tool Spindle Bearings
- Bore: 0.9843
from KMS Bearings, Inc.
produces Insert type bearings to fit KMS ’ mounted blocks as well as to fit standard industrial blocks. KMS ’ selection covers all application requirements. Use for superior corrosion resistance, low speed and load, low torque, no lube applications. Load and speed calculations are for... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from BNB INT. Co., Ltd.
PEEK is a plastic with the highest thermal and chemical resistance among moldable crystalline resins. It has good machinability, mechanical strength, and wear resistance, and can work at a high temperature (250 °C ). It also has high resistance to radiation, so it is slightly deformed when it is... [See More]
- Material / Plating: Plastic
- Rolling Element: Ceramic Balls; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: 500
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
produces Conveyor type ball bearings that can be used in standard industrial tube and pipe sizes for use in conveyor systems. Load and speed calculations are for reference only. KMS recommends testing in actual environment to be encountered. Information presented is believed to be accurate at the... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Outside Diameter: ? to 1.0000
from BNB INT. Co., Ltd.
Antiwear PET Bearing. PET is good for rolling bearings because of its high hardness, strength, dimensional stability, and low friction factor. It is good for food sanitation with nontoxicity and has great electric insulation. Advantages. It has high strength and hardness. It has good electric... [See More]
- Material / Plating: Plastic
- Rolling Element: Ceramic Balls; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -40 to 230
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
CUSTOM MADE TO ORDER - Since groove depths and shapes vary for each application, these bearings are only available on a made-to-order basis. For pricing click "Request Quote ". KMS produces Pulley and Guide Roll type ball bearings with either plastic or 316 Stainless raceways. Integration... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from BNB INT. Co., Ltd.
POM, PP, PE, Pl, PTFE, and other engineering plastics are used to manufacture bearings according to their characteristics. They are applicable to clean environments and machine equipment where corrosion resistance and lightweight materials are required, so metals are not suitable. Advantages. High... [See More]
- Material / Plating: Plastic
- Rolling Element: Stainless Steel; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -76 to 212
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from KMS Bearings, Inc.
KMS Skatewheels feature a cage type ball bearing construction for the lightest weight and fastest spinning skatewheel available. When fitted with 316 stainless balls it is corrosion resistant, no-lube, and maintenance free. Load and speed calculations are for reference only. KMS recommends testing... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from BNB INT. Co., Ltd.
Antichemical PP Bearing. PP has good strength, hardness, and chemical resistance. This material has great transparency and food sanitation and is resistant to repetitive bending. It breaks at a low temperature and has the lowest specific gravity among plastics, so it is light with a good electric... [See More]
- Material / Plating: Plastic
- Rolling Element: Stainless Steel; Ceramic Balls; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -40 to 392
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from KMS Bearings, Inc.
KMS offers the unique "XR " series bearing style with deep groove, 4-point contact ball groove geometry. This design enables the bearing to handle simultaneous radial, axial and moment loading while maintaining stiffness. As a bonus they also have minimal radial and axial play. The... [See More]
- Material / Plating: Plastic; Celcon® Acetal (POM) or PVDF (Kynar®, Solef®) or PEEK
- Type: Conrad / Deep Groove
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from BNB INT. Co., Ltd.
Antichemical PTFE Bearing (Applicable to the hydrofluoric acid environment). PTFE can work continuously at -40 °C –200 °C and has the best chemical resistance among engineering plastics. It has resistance to all types of chemicals, low friction factor, good electric insulation, and is... [See More]
- Material / Plating: Plastic
- Rolling Element: Ceramic Balls; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -40 to 302
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from BNB INT. Co., Ltd.
Antiwear and Anticorrosion PVDF Plastic Bearing (Applicable to Hydrofluoric Acid Environment). PVDF has excellent chemical and wear resistance, relatively good machinability, and high strength and hardness, and. can work continuously at a high temperature (130 °C ) while keeping chemical... [See More]
- Material / Plating: Plastic
- Rolling Element: Ceramic Balls; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -76 to 302
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
Silicon carbide bearings are more chemically stable than any other ceramics. It is especially resistant to hydrofluoric acid and has good strength and hardness for wear and corrosion resistance under high temperatures. [See More]
- Material / Plating: Plastic; Ceramic Races
- Application: Aerospace; Semiconductor equipment, LCD equipment, Chemical equipment, Aerospace equipment
- Primary Bearing Category: Radial Ball Bearing
- Rolling Element: Ceramic Balls
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
A silicon nitride bearing has all the characteristics of zirconia, as well as light weight, wear resistance, and high strength. It is almost resistant to thermal impact among ceramics and has excellent wear and chemical resistance, making it suitable for extreme environments. [See More]
- Material / Plating: Plastic; Ceramic Races
- Application: Medical / Dental; Semiconductor equipment, Display fixtures, Food equipment, Electroplating equipment, Chemical Equipment, Textile machinery, Medical equipment
- Primary Bearing Category: Radial Ball Bearing
- Rolling Element: Ceramic Balls
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
Anticorrosive UPE Bearing. It pertains to a high-density polyethylene with 1 million or higher average molecular weight and is otherwise known as UHMW-PE and UPE. Among engineering plastics, it has the highest impact resistance and significant wear resistance,. so it is widely used for its low... [See More]
- Material / Plating: Plastic
- Rolling Element: Stainless Steel; Ceramic Balls; Glass; Polymer
- Primary Bearing Category: Radial Ball Bearing
- Operating Temperature: -148 to 176
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from BNB INT. Co., Ltd.
A zirconia bearing is mainly applicable to high and low temperatures. It also has corrosion,. thermal resistance, and electric insulation. It has good mechanical strength, toughness,. and self-lubrication, making it suitable for bearings. [See More]
- Material / Plating: Plastic; Ceramic Races
- Application: Medical / Dental; Semiconductor equipment, Display fixtures, Food equipment, Electroplating equipment, Chemical Equipment, Textile machinery, Medical equipment
- Primary Bearing Category: Radial Ball Bearing
- Rolling Element: Ceramic Balls
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 420C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Stainless Steel; Plastic; Ceramic Races; STAINLESS STEEL 440C
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Inch
from Boca Bearings Company
Self Aligning Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CHROME STEEL 52100
- Description: Self Aligning Bearings
- Type: Internal Self Aligning
- Design Units: Metric
from Boca Bearings Company
Double Row Bearings [See More]
- Material / Plating: Plastic; CHROME STEEL 52100
- Description: Double Row Bearings
- Type: Maximum Capacity Double Row Full Ball Complement
- Design Units: Metric
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Plastic; CHROME STEEL 52100
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from Boca Bearings Company
Radial Bearings [See More]
- Material / Plating: Plastic; CHROME STEEL 52100
- Description: Radial Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric
from Boca Bearings Company
Self Aligning Bearings [See More]
- Material / Plating: Plastic; CHROME STEEL 52100
- Description: Self Aligning Bearings
- Type: Internal Self Aligning
- Design Units: Metric
from Boca Bearings Company
Radial Full Ceramic Bearings [See More]
- Material / Plating: Plastic; Ceramic Races; CERAMIC ZRO2
- Description: Radial Full Ceramic Bearings
- Primary Bearing Category: Radial Ball Bearing
- Design Units: Metric