Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Hangzhou X-mag Inc.
Description: Rotors & Stators X-mag automates rotor and stator production. A permanent magnet (PM) motor consists of two basic parts: a stator coil and a rotor. A stator coil which is powered by an alternating current, creates a magnetic field. A rotor made of permanent magnets
- Coil Construction: Stator Coil
- Type: AC Motor Coil
-
Supplier: Hangzhou X-mag Inc.
Description: Rotors & Stators X-mag automates rotor and stator production. A permanent magnet (PM) motor consists of two basic parts: a stator coil and a rotor. A stator coil which is powered by an alternating current, creates a magnetic field. A rotor made of permanent magnets
-
Supplier: Arnold Magnetic Technologies
Description: AC Stators & DC Stators Ramco Electric Motors, Inc. winds stator coils and builds custom stator assemblies to your design for motors from fractional HP to 200HP and up. We hand-insert both lap and concentric wound coils for single, three phase power AC
- AC Motor Construction: Induction
- Motor Type: AC Motor, DC Motor
- Other Output Power: 200 HP
- Phase: Single-phase, Three-phase
-
-
Supplier: Automation24, Inc.
Description: -switch ing. Even with very high switching frequencies the solid state contactor 3RF3416-1BB04 has a virtually unlimited service life. The solid state contactor 3RF3416-1BB04 is used in automation and control technology, particularly to control motors and plants and switch on
- AC Motor Phase: Three Phase Motor
- Continuous Current: 16 amps
- Control Voltage (Separate Control): 24 volts
- Device Technology: Solid State
-
Supplier: Automation24, Inc.
Description: The compact solid state contactor 3RF20201AA04 from Siemens has a max. switching capacity of 20 A at AC-51/400 V. The solid state contactor 3RF20201AA04 operates with a control voltage of 14-24 V DC. Even at the highest switching frequencies, the lifetime of the 3RF20201AA04
- AC Motor Phase: Single Phase Motor
- Continuous Current: 20 amps
- Control Voltage (Separate Control): 24 volts
- Device Technology: Solid State
-
Supplier: Changzhou Fulling Motor Co., Ltd
Description: BLDC flat motors are the ideal solution for many applications due to their compact, flat design (45mm diameter; length <30 mm). In the new 45BLW motors (16 poles design), the permanent magnets are located on the external rotor which rotate around the internal stator with the
- Motor Type: DC Motor
-
Supplier: Allen-Bradley / Rockwell Automation
Description: 505 NEMA Full Voltage Reversing Starter ,SIZE 4, Open, 230-240V 60Hz, with E1 Plus Solid-State Overload Relay, , 230-240V 60Hz, ,
- Device Technology: Solid State
- Overload Protection: Solid State
-
Supplier: Bodine Electric Company
Description: . Molded hall sensor assembly for accurate commutation. Wound stator with exposed laminations provides excellent heat transfer and allows maximum power per motor frame size. Rare earth magnets on the rotor provide high torque and low rotor inertia.
- Continuous Torque: 3.12 In-lbs
- Housing Length: 4.63 inch
- Motor Type: DC Motor
- Other DC Voltage: 130 VDC
-
Supplier: Bodine Electric Company
Description: . Molded hall sensor assembly for accurate commutation. Wound stator with exposed laminations provides excellent heat transfer and allows maximum power per motor frame size. Rare earth magnets on the rotor provide high torque and low rotor inertia.
- Continuous Torque: 9.44 In-lbs
- Housing Length: 5.56 inch
- Motor Type: DC Motor
- Other DC Voltage: 130 VDC
-
Supplier: Bodine Electric Company
Description: . Molded hall sensor assembly for accurate commutation. Wound stator with exposed laminations provides excellent heat transfer and allows maximum power per motor frame size. Rare earth magnets on the rotor provide high torque and low rotor inertia.
- Continuous Torque: 1.56 In-lbs
- Housing Length: 3.67 inch
- Motor Type: DC Motor
- Other DC Voltage: 130 VDC
-
Supplier: Automation24, Inc.
Description: with very high switching frequencies the solid state reversing contactor 3RF3403-1BD04 has a virtually unlimited service life. The solid state reversing contactor 3RF3403-1BD04 is used in automation and control technology, particularly to control motors and plants and switch on
- AC Motor Phase: Three Phase Motor
- Continuous Current: 3.8 amps
- Control Voltage (Separate Control): 24 volts
- Device Technology: Solid State
-
Supplier: Radwell International
Description: SOLID STATE OPTRONICS Contactors & Starters AD4C211-LS
- Device: Motor Contactor Only
- Device Technology: Solid State
-
Supplier: OMEGA Engineering, Inc.
Description: The Cutler-Hammer Electro-Mechanical Motor Starter consists of an electro-mechanical contact block or contactor and electromechanical solid-state overload relay as a full voltage non-reversing (FVNR) device. Size 00 to 2 motor starters are factory assembled. SPECIFICATIONS
- Continuous Current: 9 to 45 amps
- DC Horsepower: 1.5 to 25 HP
- Device: DC Motor Starter
- Device Technology: Solid State, Electromechanical
-
Supplier: Radwell International
Description: OVERLOAD, MOTOR CONTROL, OVERLOAD RELAY, CONTACTORS & STARTERS, SOLID STATE OVERLOAD/RELAY. FREE 2 YEAR RADWELL WARRANTY
- Device: Motor Contactor Only
- Device Technology: Solid State
-
Supplier: Radwell International
Description: AU56.0 THERMAL UNIT, MOTOR CONTROL, OVERLOAD RELAY, CONTACTORS & STARTERS, SOLID STATE OVERLOAD/RELAY. FREE 2 YEAR RADWELL WARRANTY
- Device: Motor Contactor Only
- Device Technology: Solid State
-
Supplier: Radwell International
Description: AU152 THERMAL UNIT, MOTOR CONTROL, OVERLOAD RELAY, CONTACTORS & STARTERS, SOLID STATE OVERLOAD/RELAY. FREE 2 YEAR RADWELL WARRANTY
- Device: Motor Contactor Only
- Device Technology: Solid State
-
Supplier: Galco Industrial Electronics
Description: Contactor,Solid State,Reversing,
- Device: AC Motor Starter, Motor Contactor Only
-
Supplier: PHOENIX CONTACT USA
Description: Single-phase solid-state contactor, input voltage: 230 V AC, output current: 20 A, zero voltage switch
- Continuous Current: 0.3500 to 20 amps
- Device: Motor Contactor Only
- Device Technology: Solid State
- Motor Voltage: 230 volts
-
Supplier: PHOENIX CONTACT USA
Description: Single-phase solid-state contactor, input voltage: 230 V AC, output current: 30 A, zero voltage switch
- Continuous Current: 0.1500 to 30 amps
- Device: Motor Contactor Only
- Device Technology: Solid State
- Motor Voltage: 230 volts
-
Supplier: PHOENIX CONTACT USA
Description: Single-phase solid-state contactor, input voltage: 24 V DC, output current: 30 A, zero voltage switch
- Continuous Current: 0.1500 to 30 amps
- Device: Motor Contactor Only
- Device Technology: Solid State
- Motor Voltage: 24 volts
-
Supplier: PHOENIX CONTACT USA
Description: Single-phase solid-state contactor, input voltage: 24 V DC, output current: 50 A, zero voltage switch
- Continuous Current: 0.1500 to 50 amps
- Device: Motor Contactor Only
- Device Technology: Solid State
- Motor Voltage: 24 volts
-
Supplier: Changzhou Fulling Motor Co., Ltd
Description: BLDC flat motors are the ideal solution for many applications due to their compact, flat design (45mm diameter; length <30 mm). In the new 45BLW motors (16 poles design), the permanent magnets are located on the external rotor which rotate around the internal stator with the
- Continuous Current: 10 amps
- Continuous Torque: 3.19 In-lbs
- DC Voltage: 24 Volt
- Design Units: Metric
-
Supplier: Allen-Bradley / Rockwell Automation
Description: 505 NEMA Full Voltage Reversing Starter ,SIZE 5, Open, 115-120V 60Hz, with E1 Plus Solid-State Overload Relay, , 115-120V 60Hz, , Auxiliary Contact On Starter
- Device Technology: Solid State
- Overload Protection: Solid State
-
Supplier: Allen-Bradley / Rockwell Automation
Description: 150 SMC-50 Fully Solid State Open Smart Motor Controller, Open, 24V DC, 200...600V, 90 A Line, 155 A Delta Normal Duty
- Supply Voltage (AC): 24 volts
-
Supplier: Allen-Bradley / Rockwell Automation
Description: 150 SMC-50 Fully Solid State Open Smart Motor Controller, Open, 100...240V AC, 200...480V, 90 A Line, 155 A Delta Normal Duty
- Supply Voltage (AC): 100 to 240 volts
-
Supplier: Essen Magnetics Pty Ltd
Description: The rotor is a moving component of an electromagnetic system in the electric motor, electric generator, or alternator. Its rotation is due to the interaction between the windings and magnetic fields which produces a torque around the rotor’s axis. The stator is the stationary part
-
Supplier: OMEGA Engineering, Inc.
Description: The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, step phase sequencer with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control,
- Configuration: Panel Mount
- Continuous Output Current: 0.4000 to 3.5 amps
- Drive Type: Bipolar Stepper Motor, Microstepping Motor
- Features: Self-Diagnostics
-
Supplier: Sensata Technologies
Description: The Sensata Technologies 8EA motor starter, a low-cost alternative to electro-mechanical relays, performs the PTC (positive temperature coefficient) solid-state starter function. The 8EA is suitable for compressors used in refrigerators, freezers, water coolers, de-humidifiers, vending
- Device: AC Motor Starter
- Device Technology: Solid State
-
Supplier: WorldWide Electric Corporation
Description: True phase loss protection - trips within 3 seconds Phase unbalanced prevents motor running inefficiently Ground fault trip when selected Selectable trip class: 5, 10, 20 or 30 Reset trip can be selected auto/manual reset Overload is self
- Continuous Current: 50 to 200 amps
- Control Voltage (Separate Control): 220 to 240 volts
- Device: AC Motor Starter
- Device Technology: Solid State
-
Supplier: Stearns®
Description: Features & Benefits Our solid-state switch is superior to mechanical switches Extends the life and reliability of the motor, especially for high-cycling or “dirty” environments Fast and easy to install and replace mechanical switches
- AC Motor Phase: Single Phase Motor
- Continuous Current: 16 to 50 amps
- Device Technology: Solid State
- Motor Voltage: 115 volts
-
Supplier: GE Power Conversion
Description: & Benefits: Energy savings: high efficiency of the motor and no gear box losses Large power up to 40MW and a high speed rang up to 18000 rpm High reliability: cage rotor with no rotating windings or magnets, and full VPI coverage of the stator Cost savings: smaller and lighter skid, no
- Shaft Speed: 18000 rpm
-
Supplier: Infineon Technologies AG
Description: The MOTIX™ 6EDL7151 is 3-phase a smart gate driver IC that enables the development of high-performance battery-operated products using BLDC or PMSM motors. The MOTIX™ 6EDL7151 is fully configurable to drive a wide range of MOSFETs to yield the best possible system efficiency and has
- AC Input Phase: Three Phase
- Motor(s) Controlled: DC Brushless Motor
- Operating Temperature: -40 to 125 C
- Supply Voltage (DC): 5.5 to 70 volts
-
Supplier: MTC Industries & Research Carmiel Ltd.
Description: This motor was especially designed for applications where high torque to volume ratio is needed. It is a brushless DC motor with outer wound stator, rare-earth/cobalt magnets rotor and Hall effect rotor position sensor. Peak torque obtained on the axis at nominal voltage of 28 V
- Continuous Torque: 35.4 In-lbs
- DC Motor Construction: Permanent Magnet, Other
- Design Units: Metric
- Diameter / Width: 3.39 inch
-
Supplier: ETEL S.A.
Description: The TMB+ motor is a further development of the well-known TMB torque motor series that promises more power and new functions without compromising compatibility with existing motors. This motor represents a significant advancement in torque motor technology,
- Continuous Torque: 191 to 197345 In-lbs
- Diameter / Width: 6.3 to 50.71 inch
- Features: Torque Motor
- Motor Type: DC Motor
-
Supplier: AMETEK Specialty Motors
Description: Stepper Motors AMETEK Floorcare & Specialty motors offers a wide range of MAE brand stepper motor solutions. The HY series hybrid stepper motors feature low rotor inertia for maximum possible acceleration. The HN series hybrid stepper motors offer calculated
- Motor Shape: Cylindrical Body
- NEMA Frame Size: 17 to 42 #
- Orientation: In-line, Single-ended
Find Suppliers by Category Top
Featured Products Top
-
Engineers face challenges achieving high-efficiency energy conversion and reliable motion in electric motors and generators, where suboptimal rotor or stator design can lead to energy loss, torque fluctuations, and reduced (read more)
Browse Motor Coils Datasheets for Essen Magnetics Pty Ltd -
Perfect for a wide range of applications, the Universal Drive offers multiple control methods including analog velocity, analog torque, or step & direction positioning, and is fully compatible with a wide range of motor architectures, including Brushless DC motors, PMDC Brush Motors, Open (read more)
Browse DC Motor Drives Datasheets for ElectroCraft -
TMC is meant for applications requiring high torque output in an ultra-compact environment. It delivers between 33% and 120% more torque in the same stator footprint as the equivalent TMB+. Learn More (read more)
Browse Brushless Motors Datasheets for ETEL S.A. -
which must be considered to produce a well-functioning, sufficiently-powered, and safe device. We have provided some important formulas and calculation details to determine mechanical power requirements of a DC motor, to calculate torque, and for determining the steady state temperature increase of a motor. Click here to access the resources (read more)
Browse DC Motors Datasheets for FAULHABER MICROMO -
Manatee County, Florida is one of the fastest-growing counties in the state, driving increased demand on its wastewater infrastructure. To support this expansion, the county required additional lift stations capable of reliably moving wastewater from lower elevations to centralized treatment facilitie (read more)
Browse AC Motor Drives Datasheets for Fuji Electric Corp. of America -
Casting Materials To increase the lifetime of a motor the stator can be protected with casting materials against electrical, mechanical, thermal (read more)
Browse Casting Resins Datasheets for ELANTAS North America LLC -
world of motion control, few names carry the legacy and innovation of Yaskawa. But what really stands out today isn’t just what they build, but where and how they build it. Yaskawa is doubling down on American manufacturing, investing in a new state-of-the-art campus in Franklin (read more)
Browse AC Motor Drives Datasheets for Yaskawa America, Inc. - Drives Division -
(Permanent Magnet Direct Current), permanent magnets located in the stator provide the magnetic field, instead of it being created in stator windings. Advantages of PMDC motors Cost-effective and with a high starting torque, PMDC motors are generally smaller but still offer an impressive output (read more)
Browse DC Motors Datasheets for parvalux by maxon -
rotor and stator, meaning no mechanical wear. Brushless torque motors eliminate the need for mechanical transmissions like gearboxes, belts, and speed reducers. Aluminum housing with integrated water-cooling channels is standard on QMT motors. Water cooling increases the motor’s maximum performance by pushing the performance limits. In addition, the metal housing simplifies installation thanks to bolt holes (read more)
Browse Brushless Motors Datasheets for Tecnotion
Conduct Research Top
-
Adavantage of segment servo motor
Break through the taditional design concept of servo motor, the stator of 3X MOTION segment servo motor is cut into multi-lobe structure, and then the winding is wound and assembled by spechial technology. Advantage 2: the end length can be the shortest, improve the conductor utilization rate
-
Exploring the Differences Between Outer Rotor Motors and Inner Rotor Motors
is on the outside (external to the motor) and the stator is on the inside of the motor. Comparatively, in an inner rotor motor, the rotor is on the interior of the motor and the stator is on the outside of the motor. As a reminder, the stator's function is to supply a charge that will either repel or attract
-
Sensored BLDC Motor Control Using dsPIC30F2010
on BLDC motor details. BLDC motors are basically inside-out DC motors. In a DC motor the stator is a permanent magnet. The rotor has the windings, which are excited with a current. The current in the rotor is reversed to create a rotating or moving electric field by means of a split commutator
-
Sensorless Brushless DC Motor Control with PIC16
reducing - Microcontroller the speed response and increasing the inertia for - Microcontroller Power Supply a specific torque - Speed Set-point Input * The source of heating in the BLDC motor is in the stator, while in the DC motor it is in the rotor, Motor Power Driver therefore it is easier
-
Controlling 3-Phase AC Induction Motors Using the PIC18F4431
than the PIC18F452 or PIC16F7X7. Practically speaking, control of a 3-phase AC induction motor requires pulse-width modulated control of the six switches of a 3-phase inverter bridge connected to the motor's stator windings (Figure 1). The six switches form 3 pairs of "half-bridges", which can
-
Motor (Rotor and Stator)
The rotor is a moving component of an electromagnetic system in the electric motor, electric generator, or alternator. Its rotation is due to the interaction between the windings and magnetic fields which produces a torque around the rotor's axis.
-
Difference Between Stator and Rotor
Difference Between Stator and Rotor. In the motors or generators, both parts like rotor and stator play a key role. The main disparity between them is that the stator is an inactive part of the motor whereas the rotor is the rotator part.
-
Electric Motor Handbook
Electric Motor Handbook. Written for professionals who work in electric motors, this covers updated traction applications, the latest on solid-state motor-drive controllers, electrical and mechanical parameters, specifications, shapes, performance, protection, and more.
More Information Top
-
CR4 - Thread: ELECTRONICS MOTOR STATER
ELECTRONICS MOTOR STATER .
-
CR4 - Thread: Information About Electromagnets, Please!
Next in Forum: ELECTRONICS MOTOR STATER .
-
CR4 - Thread: Noise suppression capacitor
Previous in Forum: ELECTRONICS MOTOR STATER .
-
CR4 - Thread: Retention Pond Pumps
As another poster had suggested The cost of the pumps may have other items included in the quote: Motor staters , power boxes, PLC's to control pumps.
-
Powermig 350mp
Niether the motor stater nore the breaker in the local panel box reacted fast enough.
-
Compatability of MPCB with SITOP - Entries - Industry Support - Siemens
So I think the motor stater is suitable.
-
Powermig 350mp [Archive] - WeldingWeb - Welding forum for pros and enthusiasts
Niether the motor stater nore the breaker in the local panel box reacted fast enough.
-
Universal Detection and Classification Index of Incipient Rotor Bars Fault in Squirrel-Cage Motors
Motor stater .
Indicates content that may require registration and/or purchase.