Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Rieke Metals, Inc.
Description: polythiophene-2,5-di yl Please contact us at sales@riekemetals.co m for ordering and bulk pricing. Our products are available in an electronic database in either .db or .sd formats. Highly regioregular (98.5% or higher) as well as the regiorandom (1:1:1:1) poly(3-alkylthiophen e-2,5-diyl)
- Chemical / Polymer System Type: Specialty / Other
- Features: Electrically Conductive Compound
- Filler Material: Unfilled
- Industry: Electronics, Semiconductor / IC's
-
Supplier: AGC Chemicals Americas, Inc.
Description: Highly cost-effective materials, Fluon® PTFE (Polytetrafluoroethy lene) Resins are the most widely used fluoropolymers found in many areas of modern life. Resin properties keep insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Elongation: 350 %
- Features: Thermally Insulating
- Filler Material: Unfilled
-
Supplier: Rieke Metals, Inc.
Description: poly(3-hexylthiophen e-2,5-diyl ),regiorandom
- Chemical / Polymer System Type: Specialty / Other
- Features: Electrically Conductive Compound
- Filler Material: Unfilled
- Industry: Electronics, Semiconductor / IC's
-
-
Supplier: Rieke Metals, Inc.
Description: Poly(3-pentylthiophe ne-2,5-diyl), Highly regioregular Typical results are between 90% and 93% regioregularity.
- Chemical / Polymer System Type: Specialty / Other
- Features: Electrically Conductive Compound
- Filler Material: Unfilled
- Industry: Electronics, Semiconductor / IC's
-
Supplier: Rieke Metals, Inc.
Description: Poly(3-octylthiophen e-2,5-diyl ), Highly regioregular Electronic Grade Typical results are between 90% and 93% regioregularity. The "E" series typically contains less than 0.04% Ni / < 0.02% Zn / < 0.04% Br. The "standard" series typically contains less than 0.1% Ni / < 0.5% Zn / < 0.7% Br.
- Chemical / Polymer System Type: Specialty / Other
- Features: Electrically Conductive Compound
- Filler Material: Unfilled
- Industry: Electronics, Semiconductor / IC's
-
Supplier: MCG - Performance Polymers Division
Description: G-Polymer™, which can be used to freely control crystallinity and the cohesive power of the noncrystalline part, is the next generation of vinyl alcohol resins. KEY FEATURES OUTSTANDING TRANSPARENCY AND SOLVENT RESISTANCE In addition to outstanding transparency and
- Chemical / Polymer System Type: PolyVinyl Chloride (PVC)
- Compound Type: Film Grade Resin, Extrusion Grade Resin
- Industry: Electronics, Medical / Food (FDA)
- Material Type / Grade: Thermoplastic
-
Supplier: ExxonMobil - Polypropylene Products
Description: Vistamaxx performance polymers are a semi-crystalline polyolefin which can enable a wide variety of unique product attributes and create new possibilities for innovation in people’s daily life. Due to its unique polymer attributes (such as toughness, cling, sealability, softness
- Chemical / Polymer System Type: Polypropylene (PP)
- Industry: Automotive, Industrial, Building / Construction, Other
- Material Type / Grade: Thermoplastic
- Melt Flow Index (MFI): 3.7 g / 10 minutes
-
Supplier: AGC Chemicals Americas, Inc.
Description: Highly cost-effective materials, Fluon® PTFE (Polytetrafluoroethy lene) Resins are the most widely used fluoropolymers found in many areas of modern life. Resin properties keep insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Features: Thermally Insulating
- Filler Material: Unfilled
- Industry: Automotive
-
Supplier: MCG - Performance Polymers Division
Description: (Simplified Gas Transmission Rate simulation software). APPLICATIONS Meat packaging Modified atmosphere Packaging Bag-In-Box Baby food packaging Agricultural film applications Bottle Tube Pipe Plastic Fuel Tank
- Chemical / Polymer System Type: Ethylene Copolymer (EEA, EVA)
- Industry: Medical / Food (FDA), Industrial
- Material Type / Grade: Thermoplastic
-
Supplier: MCG - Performance Polymers Division
Description: . PVC GOHSENOL™ (PVOH/PVA) is widely used as a dispersing stabiliser for the suspension polymerization of Vinyl Chloride Monomer (VCM). The surface active performance in relation to Vinyl monomers can be optimised by selecting the appropriate grade of GOHSENOL™
- Chemical / Polymer System Type: PolyVinyl Chloride (PVC)
- Compound Type: Film Grade Resin
- Industry: Medical / Food (FDA), Industrial
- Material Type / Grade: Thermoplastic
-
Supplier: MCG - Performance Polymers Division
Description: Cationic additive WO, LW (Ethylene oxyde) Hydrophilic and internal plasticized Water soluble film Secondary suspension agent for PVC WO Series
- Chemical / Polymer System Type: PolyVinyl Chloride (PVC)
- Compound Type: Film Grade Resin
- Industry: Medical / Food (FDA), Industrial
- Material Type / Grade: Thermoplastic
-
Supplier: Kraton Polymers LLC
Description: Kraton FG polymers are SEBS polymers with maleic anhydride (MA) grafted onto the rubber midblock. The commercial Kraton FG polymers have 1.0 to 1.7 wt. % MA grafted onto the block copolymer. The MA grafting improves the adhesion to nylon, polyester, ethylene vinyl alcohol,
- Chemical / Polymer System Type: Styrene Copolymer (SIS / SBS)
- Filler Material: Unfilled
- Industry: Other
- Material Type / Grade: Thermoplastic
-
Supplier: Kraton Polymers LLC
Description: The Kraton D SIS family of polymers are high performance thermoplastic elastomers with a combination of high strength, low hardness and low viscosity for easy thermoplastic processing as a melt or in solution. SIS polymers are based on styrene and isoprene and are the lowest hardness
- Chemical / Polymer System Type: Styrene Copolymer (SIS / SBS)
- Filler Material: Unfilled
- Industry: Other
- Material Type / Grade: Thermoplastic
-
Supplier: Kraton Polymers LLC
Description: The Kraton D SBS family of polymers is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. The SBS block copolymers are composed of blocks of styrene and butadiene. It is the material of
- Chemical / Polymer System Type: Styrene Copolymer (SIS / SBS)
- Filler Material: Unfilled
- Industry: Medical / Food (FDA), Other
- Material Type / Grade: Thermoplastic
-
Supplier: Master Bond, Inc.
Description: Master Bond Polymer System EP21CLV compound is a two component epoxy compound for general purpose bonding or casting formulated to cure at room temperature or more rapidly at elevated temperatures, with a one-to-one mix ratio, weight or volume. It readily develops a high bonding strength of
- Chemical / Polymer System Type: Epoxy
- Coeff. of Thermal Expansion (CTE): 22 to 33 µin/in-F
- Compound Type: Casting Resin
- Deflection Temperature (@ 264 psi, 1.8 MPa): 180 F
-
Supplier: Toray Industries (America), Inc.
Description: Toyo Plastic Seiko Co., Ltd. is manufacturing and marketing materials for cut and shaved processing (rods, boards and sheets) made of super engineering plastics (such as PAI, PEEK and PPS) with excellent resistance to heat, chemicals and wear. The materials are widely used in areas such as
- Compound Type: Molding Resin
- Industry: Semiconductor / IC's, Medical / Food (FDA)
- Material Type / Grade: Thermoplastic
-
Supplier: Victrex PLC
Description: High performance thermoplastic material, unreinforced Poly Ether Ether Ketone (PEEK), semi crystalline, coarse powder for extrusion compounding, low flow, FDA food contact compliant, color natural.
- Chemical / Polymer System Type: PEEK
- Compound Type: Molding Resin
- Elongation: 30 %
- Filler Material: Unfilled
-
Supplier: Victrex PLC
Description: High performance thermoplastic material, 20% carbon fiber reinforced Poly Ether Ether Ketone (PEEK), semi crystalline, granules for injection molding and extrusion, standard flow, FDA food contact compliant, color black. Typical Application Areas: Applications for higher strength and stiffness in a
- Chemical / Polymer System Type: PEEK
- Coeff. of Thermal Expansion (CTE): 8 to 110 µin/in-F
- Compound Type: Extrusion Grade Resin, Molding Resin
- Deflection Temperature (@ 264 psi, 1.8 MPa): 325 F
-
Supplier: Victrex PLC
Description: High performance thermoplastic material, unreinforced Poly Ether Ether Ketone (PEEK), semi crystalline, depth filtered granules for injection molding, very easy flow, FDA food contact compliant, color natural/beige.
- Chemical / Polymer System Type: PEEK
- Coeff. of Thermal Expansion (CTE): 45 to 140 µin/in-F
- Compound Type: Molding Resin
- Deflection Temperature (@ 264 psi, 1.8 MPa): 156 F
-
Supplier: Victrex PLC
Description: High performance thermoplastic material, unreinforced Poly Ether Ketone Ether Ketone Ketone (PEKEKK), semi crystalline, coarse powder for extrusion compounding, low flow, color natural.
- Chemical / Polymer System Type: PEEK
- Compound Type: Molding Resin
- Elongation: 10 %
- Industry: Aerospace, Automotive, Electronics
-
Supplier: 3M Advanced Materials Division
Description: In 1969, astronauts boarded the Apollo 11 spacecraft wearing boots containing 3M™ Dyneon™ Fluoroelastomers. Today, these synthetic elastomeric materials are used in some of the toughest environments on earth. From hot-running automotive engines to harsh chemicals of semiconductor manufacturing and
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF), Polyamide / Nylon, Polypropylene (PP), Specialty / Other
- Compound Type: Film Grade Resin, Extrusion Grade Resin, Molding Resin
- Elongation: 170 to 350 %
- Features: Anti-static, Electrically Conductive Compound, Flame Retardant (e.g. UL 94 Rated), Optical Grade
-
Supplier: Reid Supply
Description: Plastic Tubing Cutters provide a square cut without deforming the tubing to provide a secure connection into the fitting. The available leash allows the cutter to be affixed to clothing or the cutting location. . Plastic Tube Cutter provides a square cut to tubes without deforming the
- Tubing / Pipe Material: Polymer / Plastic
-
Supplier: Pacific Materials
Description: EVOH Material
- Material Type / Grade: Thermoplastic
- Resins & Compounds: Pellets
-
Supplier: Ensinger North America
Description: ENSINGER Penn Fibre is the nation’s leading manufacturer of engineering and high performance polymers in extruded plastic sheets. Extruded from .031” to .250” thick and up to 48” wide, most stock plastic sheets ship in one to two days. Plastic sheet in custom thicknesses
- Chemical / Polymer System Type: Polyphenylene Oxide (PPO), Polypropylene (PP), Polysulphide / PPS, Polysulphone, Polyvinyl Chloride (PVC), Fluoropolymer (PTFE / PVDF), PEEK, Polyetherimide (PEI)
- Overall Length: Up to 96 inch
- Overall Thickness: 0.0310 to 0.2500 inch
- Overall Width: Up to 48 inch
-
Supplier: Accuris
Description: EMBEDDING COMPOUND, LABORATORY (PARAFFIN AND PLASTIC POLYMERS)
-
Supplier: BMP, Inc.
Description: Biomedical Polymers offers Injection Molding and Injection Blow Molding capabilities under one roof providing a level of flexibility for those customers who require both. Thirteen Cincinnati Milicron electric injection molding machines ranging in tonnage from 110 to 300 tons are highly
- Location: North America, United States Only, Northeast US Only
- Molding Type: Blow Molding, Injection Blow Molding, Thermoplastic Injection Molding, Thermoset Injection Molding
- Services Offered: Clean Room Molding, Large Part Molding, Micro Molding, Two-shot Injection Molding, Prototype / Market Entry Molding, Low Volume Production (Short Runs), High Volume Production (Long Runs), Assembly Services, Tool / Mold Making, Bonding, Design Assistance, Graphics, Just-In-Time Capability, Packaging
-
Supplier: Budnick Converting, Inc.
Description: 7446 is a 100µm mono-oriented polypropylene (MOPP) designed for the belting of plastic bags in food industry.
- Adhesive: Specialty / Other
- Carrier / Backing Material: Plastic / Polymer
- Thickness: 0.0040 inches
-
Supplier: Polymer Technologies Inc.
Description: Resins and Material Selection PTI specializes in the production of advanced plastic components, including complex geometries and technologically-dema nding and engineered materials. The types of resins that we mold include: PEEK, Ultem Implantable PLA, PMMA, PVOH
- Location: North America, United States Only, Northeast US Only
- Molding Type: Thermoplastic Injection Molding, Thermoset Injection Molding
- Services Offered: Insert Molding / Overmolding, Large Part Molding, Micro Molding, Low Volume Production (Short Runs), High Volume Production (Long Runs), Assembly Services, Tool / Mold Making, Design Assistance, Just-In-Time Capability, Machining
-
Supplier: Creative Composites Group
Description: Creative custom manufactures and stocks and extensive array of fiberglass reinforced structural shapes . Standard structural profiles include: FRP I beams , FRP W beams , FRP channel , FRP Angle , FRP round tubes , FRP square tubes , FRP rectangular tubes , FRP Solid Rods , FRP solid square bar ,
- Coeff. of Thermal Expansion (CTE): 4.4 µin/in-F
- Dielectric Constant: 5.2
- Dielectric Strength: 40 kV/in
- Industry: Marine, General Industrial
-
Supplier: U.S. Plastic Corporation
Description: Cutters are recommended for plastic pipe and tubing. Thinnest wheels of costly steel produce almost burrless cuts. It cuts fast, clean, and square. Six sizes handle a wide range of pipe diameters. For ABS, PE and PB. There is a separate wheel for PVC.
- Tubing / Pipe Material: Polymer / Plastic
-
Supplier: Esprix Technologies
Description: natural resins are moderate MF resins and are well suited for IM parts as well as the matrix polymer for moderately filled compounds. Ketoprix™ EK33 and EKT33 have excellent flow properties and are used in E&E, CAM, Auto and Industrial End Uses. PROCESSING KETOPRIX™
- Chemical / Polymer System Type: Specialty / Other
- Compound Type: Molding Resin
- Deflection Temperature (@ 264 psi, 1.8 MPa): 221 to 410 F
- Dielectric Strength: 432 kV/in
-
Supplier: Matexcel
Description: products, including monomers, free polymers and surface grafted polymers. Our polymer manufacturing services include: Additive Manufacturing Customized Polymerization Plastic Processing Polymer Characterization
- Chemicals / Chemical Products: Polymers
- Location: North America, United States Only, Northeast US Only
- Materials / Material Products: Plastics
- Services Offered: Compounding, Formulation, Inspection and Analytical Testing, Specialty / Other
-
Supplier: Elasto Proxy Inc.
Description: -level specifications. Specialty polymers can also provide thermal or electrical conductivity, or shielding against electromagnetic interference (EMI). Plastic Extrusion Services Elasto Proxy can also helps you source extruded plastic materials. Our solutions providers can then
- Capabilities: Assembly, Welding, Laminating, Other
- Location: North America, United States Only, Southern US Only, Canada Only, East Asia / Pacific Only
- Materials: ABS, CPVC, Delrin®, Hypalon® (CSM), Kevlar®, Nylon / Polyamide, PEEK, Polycarbonate (PC), Polyethylene (PE), Polyoxymethylene (POM, Acetal), Polyphenylene Sulfide (PPS), Polypropylene (PP), Polyurethane / Urethane, PTFE (e.g. Teflon®), PVC, PVDF, Vinyl, Other
- Services: Design, Model, Prototype, R&D, Test / Inspect, Other
-
Supplier: Saint-Gobain Tape Solutions
Description: Norseal® PVC extrusion is a PVC-based foam polymer where the foam core compresses easily to conform and fill joints. This economical solution is an attractive alternative to wet caulk sealing methods. FEATURES: Provide excellent seal against light, dust and moisture. Long spooled lengths are
- Industry: General Industrial
-
Supplier: Shenzhen Dechengwang Technology Co., Ltd
Description: resistance, which mean it can resist fire. 7. Non wetting 8. Smooth surface finish can be achieved 9. Food grade compliancy With unrivaled experience working with high-performance polymer we can provide you and your team to design material to suit your needs. We
- Location: East Asia / Pacific Only
Find Suppliers by Category Top
Featured Products Top
-
ExxonMobil™ PP and Vistamaxx™ performance polymers can help to improve pallet durability while helping to enable incorporation of mechanically recycled content. (read more)
Browse Polymers and Plastic Resins Datasheets for ExxonMobil - Polypropylene Products -
. We carefully select the best polymers and additives to meet your specific need, then compound them in a way that maximizes properties and provides the best value. You will like the results. Fluoroplastic compounds and alloys TPEs (fluoro-material blends (read more)
Browse Specialty Polymers and Resins Datasheets for Cri-Tech, Inc. -
Features: - Specializes in producing high-quality plastic optics in various shapes. - Utilizes state-of-the-art equipment for efficient production of polymer optical components. - Expertise in optics molding and development of molds for standard and custom optics. - Offers a (read more)
Browse Optical Prisms Datasheets for Avantier Inc. -
Dexmet® Corporation, a part of PPG’s engineered materials division
PolyGrid® precision-expanded polymers
is our specialty. Dexmet’s extensive manufacturing resources can accommodate many variations for plastic materials in a range of finished thicknesses. PolyGrid's® flexibility and its unique properties allow our expanded polymers to be used in a (read more)
Browse Expanded Sheet Materials Datasheets for Dexmet® Corporation, a part of PPG’s engineered materials division -
The molding process itself is crucial to reap the rewards of the advantages of thermosets, but the properties of the materials used, like fiber-reinforced polymers or fiberglass-reinforced plastics (FRP), are what make these finished parts a success ... There is a reason so (read more)
Browse Datasheets for Osborne Industries, Inc. -
product designs! THERMOPLASTIC VS THERMOSETTING PLASTIC Thermoplastics and thermosetting plastics are two separate classes of polymers, which are differentiated based on their behavior in the presence of heat. The material difference between the two is that (read more)
Browse Datasheets for Osborne Industries, Inc. -
Comprehending the difference between thermoset vs thermoplastics, and which applications are suitable for each type, is often confused. The differences between these two polymers are significant enough that understanding the behavior of each can ultimately help improve product designs and decisions. Osborne Industries breaks down the differences between these two types of well-known polymers. Read more via the link above. (read more)
Browse Datasheets for Osborne Industries, Inc. -
Datasheet EP™22 Self-Lubricating Engineered Plastic Bushings Good bushing performance in dry (read more)
Browse Plain Bearings and Sleeve Bearings Datasheets for GGB -
Self-lubricating plastic slewing ring systems represent a modern, high-performance alternative to traditional metal bearings for a wide array of applications. By leveraging advanced materials like engineered polymers and anodized aluminum, they deliver maintenance (read more)
Browse Ball Bearings Datasheets for Pacific International Bearing, Inc. -
In the world of advanced plastics manufacturing, Design for Manufacturing (DFM) has become a cornerstone of efficiency, precision, and innovation. For companies producing mission-critical components, especially those using high-performance polymers like PEEK, Torlon®, Ryton®, FEP, PFA, and Ultem®, DFM ensures that each part is engineered for both functionality and manufacturability. (read more)
Browse Plastic Molding Services Datasheets for Pexco
Conduct Research Top
-
A Brief Guide to Selecting Polymer Gears Over Metal Gears
One option you may not think of when selecting a gearbox for your application? The material of the gears! Gear material can be classified into two types: metal and non-metallic (such as polymer/plastic). Metal gears have several advantages over plastic gears, including higher strength, improved
-
A pDCPD Primer
It's the short name for polydicyclopentadiene, a thermoset polymer plastic material.
-
Polymer Optics
Polymer optics, also known as plastic optics, are specialized optics made from highly transparent organic polymer materials, or optical polymers. At Shanghai Optics we manufacture high quality polymer optical components and lens assemblies for a wide variety of applications. These lenses have low
-
What Is PFA Plastic?
PFA plastic, also known as perfluoroalkoxy polymer, has various unique features that make it ideal for a number of high purity applications
-
Dialkyl Phthalate Plasticizers
The solubility of a plasticizer in a polymer is governed by thermodynamic considerations. well documented by numerous researchers. The effect of plasticizers on dynamic properties is less widely known. This paper tries to gain a better understanding of the dynamic mechanical properties
-
What Do Plasticizers Do?
Plasticizers are non-volatile chemical solvents used throughout the plastics industry to increase such properties as flexibility, pliability, durability, longevity, biodegradability, and extensibility in polymers. When added to a plastic or elastomer, plasticizers affect the properties
-
Determination of Additives in Polymers and Rubbers
Determination of Additives in Polymers and Rubbers. Designed as a practical text for use in the labs of the plastic producer and user industries, this up-to-date book presents recent knowledge on polymer additive systems, such as chromatographic techniques, gas analysis, thermogravimetry, and more.
-
What is a Polymer Battery?
The polymer lithium battery is developed on the basis of the liquid lithium ion battery. Its positive electrode and negative electrode materials are the same as the liquid lithium ion battery, but it uses gel electrolyte and aluminum plastic film as the outer packaging, so it has a lighter weight
More Information Top
-
Plasticizers
Summary.......................................................................................................................................................7 Introduction .................................................................................................................................................13 Plasticizers and Plasticization .................................................................................................................13 Major Plasticizer Types ...........................................................................................................................15 Phthalates............................................................................................................................................15 Aliphatics..............................................................................................................................................16 Epoxidized Vegetable Oils...................................................................................................................16 Trimellitates..........................................................................................................................................16 Benzoates............................................................................................................................................17 Phosphate Plasticizers.........................................................................................................................17 Polymeric Plasticizers ..........................................................................................................................17 Manufacturing Processes............................................................................................................................17 Polycarboxylic Acid Esters ......................................................................................................................17 Epoxidized Vegetable Oils ......................................................................................................................18 Phosphate …
-
Handbook of PLASTIC AND RUBBER ADDITIVES Volume 1 and 2
Chem. Descrip.: Med. m.w. polymeric plasticizer .
-
Chromatography for Sustainable Polymeric Materials
In a recent study the effect of polyester molecular weight, end-groups and chain architecture on migration rate of poly(vinyl chloride)/polyester blends was evaluated to develop a migration resistant polymeric plasticiser [40].
-
Handbook of Food Packaging Chemicals and Materials
Chem. Descrip.: 2-Methyl-1,3-propanediol See Methylpropanediol CAS 2163-42-0; EINECS/ELINCS 412-350-5 Uses: Intermediate for mfg. of urethanes, unsat. polyesters, gel coats, sat. polyester and alkyd coatings, polymeric plasticizers ; food- contact coatings; solvent, compatibilizer for personal care …
-
Encyclopedia of Industrial Additives, Volume 3
Descrip.: Low-visc. polyester Category/Applications: Polymeric plas- ticizer for vinyl; provides high solvent extraction resistance, low volatility, and excellent compatibility, with low odor and light color; used in plastisols and organosols, foams, calendered films, sheeting, profile extrusions, and coated .
-
Vinyl Plasticizers
Polymeric Plasticizers .
-
Handbook of Textile Processing Chemicals
UK] Chem. Descrip.: Polymeric plasticizer /silicone aq. emulsion Uses: Softener for incorporation into pigment printing systems to give im- proved handle and rub fastness Properties: Liq.; nonionic Matexil Thickener CP [Uniqema/ICI Surf.
-
Handbook of Adhesive Chemical and Compounding Ingredients
Chem. Descrip.: Med. to high m.w. polymeric plasticizer .
Indicates content that may require registration and/or purchase.