Double Row Angular Contact Bearings
from Quality Bearings & Components
Double Row. ANGULAR CONTACT BALL BEARINGS – METRIC. • Chrome Steel. • 5200 Series [See More]
- Type: Double Row Angular Contact
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 1.1811
from Schaeffler Technologies AG & Co. KG
Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these. They... [See More]
- Type: Double Row Angular Contact
from CCTY Bearing
CCTY offers a full range of deep groove ball bearings that can meet high-level applications along with basic applications. Find deep groove ball bearings that fit your application by clicking on the size below: [See More]
- Type: Double Row Angular Contact
- Grease: 8500 to 22000
from SKF/North America
SKF double row angular contact ball bearings correspond in design to two single row angular contact ball bearings but take up less axial space. They can accommodate radial loads as well as axial loads acting in both directions. They provide stiff bearing arrangements and are able to accommodate... [See More]
- Type: Double Row Angular Contact
- Bore: 7.0866
- Design Units: Metric
- Outside Diameter: 11.0236
from Timken Company (The)
Angular Contact Double-Row 5000 Product Family. Double-row angular contact bearings are available in Light 5200 and Medium 5300 Series. These bearings have the same bores and outside diameters as the corresponding sizes in the 200 and 300 Series, single row radial type. Double row angular contact... [See More]
- Type: Double Row Angular Contact
- Bore: 0.4724 to 5.9055
from SKF/Global
In most applications, ordinary greases and lubricating oils will provide satisfactory lubrication to the bearing giving it an acceptable service life. However, there may be cases where lack of accessibility means that relubrication is virtually impossible, or where very good contaminant exclusion is... [See More]
- Type: Double Row Angular Contact
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 2.0472
from AST Bearings LLC
ABEC Grades 1and 3. Other grades can be quoted, upon request. [See More]
- Type: Double Row Angular Contact
- Bore: 0.3937
- Design Units: Inch
- Outside Diameter: 1.1811
from Noma Bearing Corporation
The 5200 series double row, angular contact bearings are designed to meet the demand for increased axial and radial rigidity in applications where space is limited. These bearings are used in equipment where heavy radial loads, combined radial and thrust loads, and two directional loads are... [See More]
- Type: Double Row Angular Contact
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 1.1811
from Quality Bearings & Components
Double Row. ANGULAR CONTACT BALL BEARINGS – METRIC. • Chrome Steel. • 5300 Series [See More]
- Type: Double Row Angular Contact
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 1.3780
from Schaeffler Technologies AG & Co. KG
Series BXRO. Increase in performance compared with series 32 ball bearing because of up to 50 % more rolling elements. Increased rating life. Improved Performance and Higher Bearing Accuracy: Competition for Bearings with Split Inner Rings. Ball roller bearings series BXRO are double row bearings... [See More]
- Type: Double Row Angular Contact
from SKF/Global
MRC double-row angular contact ball bearings are manufactured in two main types: C-type (Conrad construction) and M-type (maximum capacity with filling notches). Each of the two rows has a 30 ° contact angle. [See More]
- Type: Double Row Angular Contact
- Bore: 0.7874
- Design Units: Metric
- Outside Diameter: 1.8504
from AST Bearings LLC
Two rubber seals = (2RS), also available with a single rubber seal = (RS). [See More]
- Type: Double Row Angular Contact
- Bore: 0.3937
- Design Units: Inch
- Outside Diameter: 1.1811
from Noma Bearing Corporation
The 5200 series double row, angular contact bearings are designed to meet the demand for increased axial and radial rigidity in applications where space is limited. These bearings are used in equipment where heavy radial loads, combined radial and thrust loads, and two directional loads are... [See More]
- Type: Double Row Angular Contact
- Bore: 0.6693
- Design Units: Metric
- Outside Diameter: 1.5748
from Quality Bearings & Components
Plastic Raceways. PLAIN BALL BEARINGS-DOUBLE ROW – INCH/METRIC. • Acetal Raceways. • Glass or 316 Stainless Steel Balls [See More]
- Type: Double Row Angular Contact
- Bore: 0.2500
- Design Units: Inch
- Outside Diameter: 0.6250
from Schaeffler Technologies AG & Co. KG
Series BXRT. Less space required. Lower friction. Alternative to tapered roller bearings. The Tandem Design: A Low-Friction. Alternative to Tapered Roller Bearings. The tandem design of the INA ball roller bearing is a double-row bearing whose ball roller rows are in a tandem arrangement. The... [See More]
- Type: Double Row Angular Contact
from AST Bearings LLC
Two metal shields = (ZZ), also available with a single metal shield = (Z). [See More]
- Type: Double Row Angular Contact
- Bore: 0.3937
- Design Units: Inch
- Outside Diameter: 1.1811
from Noma Bearing Corporation
The 5200 series double row, angular contact bearings are designed to meet the demand for increased axial and radial rigidity in applications where space is limited. These bearings are used in equipment where heavy radial loads, combined radial and thrust loads, and two directional loads are... [See More]
- Type: Double Row Angular Contact
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 2.0472
from AST Bearings LLC
ABEC Grades 1and 3. Other grades can be quoted, upon request. [See More]
- Type: Double Row Angular Contact
- Bore: 0.4724
- Design Units: Inch
- Outside Diameter: 1.2598