Switch or Alarm Signal Leak Testing Equipment
from ClampOn, Inc.
Intelligent DSP electronics with signal processing [See More]
- Output Options: Analog Current; Switch or Alarm Signal
- Local Interface: Computer Interface
- Leak Test Method: Ultrasonic Leak Detector
- Computer Interface Options: Serial Interface; Other Computer Interface
from Advanced Sensors Ltd.
Advanced Sensors FluoroTrak - Fluorescein Leak Detection hosts an unprecedented list of features for equipment of this type. The key features are listed below. » Remote Operation - up to 5m from the pipeline. » Reliable Detection - wide swath provides large scan area. » Highly... [See More]
- Output Options: Switch or Alarm Signal
- Local Interface: Computer Interface
- Leak Test Method: Fluorescein
- Computer Interface Options: Serial Interface
from Bacharach, Inc.
Detects all combustible gases with excellent sensitivity and no calibration required. Sensor located in the probe tip for ultimate sensitivity, fast response and easy changing. Visual and audible indicators for clear leak identification. The Leakator ® Jr is an ideal instrument for pinpointing... [See More]
- Output Options: Switch or Alarm Signal
- Display Type: Analog Meter or Indicator
- Leak Test Method: Low Power Metal Oxide
- Features: Audible Alarm Option
from Bacharach, Inc.
Infrared, electrochemical and MOS sensor options. Detects CFC, HCFC, HFC, refrigerants, oxygen, toxic and combustible gases. Selectable current or volt analog output. IP66 housing options, including remote and duct mount sensors. Built-in relay with adjustable set-point. The MGS-150 Gas Detector can... [See More]
- Output Options: Analog Voltage; Analog Current; Switch or Alarm Signal
- Display Type: Analog Meter or Indicator
- Leak Test Method: Infrared, Semiconductor, Electrochemical
- Features: Audible Alarm Option
from Bacharach, Inc.
Detects leaks that other instruments can ’t. 1ppm Minimum Detectable Level for refrigerants – the lowest MDL in the industry. High-performance detection of halogenated refrigerants, CO2 and NH3. Identify leaks early to mitigate refrigerant loss, protect produce, enhance energy... [See More]
- Output Options: Analog Current; Switch or Alarm Signal
- Local Interface: Digital Front Panel; Computer Interface
- Leak Test Method: Proprietary Non-dispersive Infrared (NDIR) Technology
- Computer Interface Options: Serial Interface
from Bacharach, Inc.
Detects leaks that other instruments can ’t. 1ppm Minimum Detectable Level for refrigerants – the lowest MDL in the industry. High-performance detection of halogenated refrigerants, CO2 and NH3. Identify leaks early to mitigate refrigerant loss, enhance energy efficiency. Ideal solution... [See More]
- Output Options: Analog Current; Switch or Alarm Signal
- Local Interface: Digital Front Panel
- Leak Test Method: Proprietary Non-dispersive Infrared (NDIR) Technology
- Display Type: Digital Readouts
from Bacharach, Inc.
Flexible two-sensor capability, local and/or remote. One user-interface platform for all sensor types. Two analog outputs and Modbus RTU interface. Three fully configurable, user-assignable relays. Magnetic wand enables easy, non-intrusive configuration/calibration. IP66 ABS or aluminum enclosure... [See More]
- Output Options: Analog Voltage; Analog Current; Switch or Alarm Signal
- Local Interface: Digital Front Panel
- Leak Test Method: Electrochemical, Semiconductor, Catalytic Bead, Infrared
- Computer Interface Options: Serial Interface