Chipbreaker Cutting Tool Inserts
from Aloris Tool Technology Co., Inc.
Accommodates standard triangular negative rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. [See More]
- Shape: Triangle; Square; Chipbreaker
- Tip Angle: 80°
- Application: Turning; Facing
- Material: Carbide
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 30
from Greenleaf Corporation
35 ° diamond chip control insert, precision finishing config [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 35°
- Application: Milling; Turning
- I.C.: 0.375
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 53
from Greenleaf Corporation
55 degree diamond insert, precision finishing config [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 55°
- Application: Milling; Turning
- I.C.: 0.500
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 33
from Greenleaf Corporation
80 degree diamond insert, precision finishing config [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 48
from Greenleaf Corporation
Negative diamond insert, rough stuff configuration [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Grooving; Turning
- Material: Carbide
from Greenleaf Corporation
80 ° trigon chip control configuration, screw on [See More]
- Shape: Trigon; Chipbreaker
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.250
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 18
from Greenleaf Corporation
80 ° trigon finishing configuration [See More]
- Shape: Trigon; Chipbreaker
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.375
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 3
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Shape: Groove/Turn Shape; Chipbreaker
- Tip Angle: 90°
- Application: Boring; Turning
- Thickness: 0.187
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Chamfer Angle: 12
from Greenleaf Corporation
Holemill insert, screw on configuration [See More]
- Shape: Square; Chipbreaker
- Tip Angle: 90°
- Application: Boring; Turning
- I.C.: 0.312
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Shape: Rhombic; Indexable; Chipbreaker
- Thickness: 0.098
- Application: Turning
- Material: Carbide
from Greenleaf Corporation
A high-performance grade for milling steels at high speed. Should be used when milling forged and cast steels and selected ductile irons. A unique combination fo toughness and heat resistance makes it suitable for heavy and light duty milling at high speeds. [See More]
- Shape: Rectangular; Chipbreaker
- Thickness: 0.312
- Application: Boring; Turning
- Material: Carbide
from Greenleaf Corporation
Radius forming insert, screw on [See More]
- Shape: Square; Chipbreaker
- Tip Angle: 90°
- Application: Milling; Turning
- I.C.: 0.750
from Greenleaf Corporation
Round chip control insert, precision finishing config [See More]
- Shape: Circular; Chipbreaker
- I.C.: 0.500
- Application: Milling; Turning
- Thickness: 0.187
from Greenleaf Corporation
Turbo form positive round insert, no hole [See More]
- Shape: Circular; Chipbreaker
- I.C.: 0.250
- Application: Milling; Turning
- Thickness: 0.125
from Greenleaf Corporation
Turbo form positive round insert [See More]
- Shape: Circular; Chipbreaker
- I.C.: 0.250
- Application: Milling; Turning
- Thickness: 0.125
from Greenleaf Corporation
Square chip control insert, finishing config [See More]
- Shape: Square; Chipbreaker
- Tip Angle: 90°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Square geometry, rough stuff configuration [See More]
- Shape: Square; Chipbreaker
- Tip Angle: 90°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Triangle chip control insert, precision finishing config [See More]
- Shape: Triangle; Chipbreaker
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.375