Milling Cutting Tool Inserts
from Sandvik Coromant Co.
Auto AF insert for milling [See More]
- Application: Milling
- Radius: 0.071
- Thickness: 0.500
- Chamfer Angle: 75
from Greenleaf Corporation
35 ° diamond chip control insert, precision finishing config [See More]
- Application: Milling; Turning
- Tip Angle: 35°
- Shape: Diamond; Chipbreaker
- I.C.: 0.375
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.402
- Grade: IC50M
from Sandvik Coromant Co.
Auto AF insert for milling [See More]
- Application: Milling
- Radius: 0.071
- Thickness: 0.500
- Chamfer Angle: 75
from Greenleaf Corporation
35 ° diamond insert, flat top config [See More]
- Application: Milling; Turning
- Tip Angle: 35°
- Shape: Diamond
- I.C.: 0.375
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Grade: IC50M
- Thickness: 0.500
from Sandvik Coromant Co.
Auto AF insert for milling [See More]
- Application: Milling
- Radius: 0.071
- Thickness: 0.500
- Chamfer Angle: 75
from Greenleaf Corporation
35 ° diamond insert, screw on configuration [See More]
- Application: Milling; Turning
- Tip Angle: 35°
- Shape: Diamond
- I.C.: 0.375
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.031
- Thickness: 0.571
- Grade: IC328
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.125
- Chamfer Angle: 45
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Application: Milling
- Tip Angle: 35°
- Shape: V-Bottom
- I.C.: 0.312
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.039
- Thickness: 0.591
- Grade: IC328
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.125
- Chamfer Angle: 45
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Application: Milling
- Tip Angle: 35°
- Shape: Diamond
- Thickness: 0.250
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.122
- Thickness: 0.610
- Grade: IC328
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
55 degree diamond insert, precision finishing config [See More]
- Application: Milling; Turning
- Tip Angle: 55°
- Shape: Diamond; Chipbreaker
- I.C.: 0.500
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.063
- Thickness: 0.394
- Grade: IC328
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.125
- Chamfer Angle: 45
from Greenleaf Corporation
Negative geometry, screw on configuration [See More]
- Application: Milling; Turning
- Tip Angle: 55°
- Shape: Diamond
- I.C.: 0.375
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.024
- Thickness: 0.179
- Grade: IC328
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative geometry, no hole [See More]
- Application: Milling; Turning
- Tip Angle: 55°
- Shape: Diamond
- I.C.: 0.375
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.024
- Thickness: 0.531
- Grade: IC950
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Application: Milling
- Tip Angle: 35°
- Shape: V-Bottom
- I.C.: 0.500
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.032
- Thickness: 0.591
- Grade: IC950
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative diamond insert, screw on configuration [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond
- I.C.: 0.500
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Grade: IC928
from Sandvik Coromant Co.
Auto FS insert for milling [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative diamond insert, no hole [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond
- I.C.: 0.750
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.031
- Thickness: 0.500
- Grade: IC928
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.079
- Thickness: 0.219
- Chamfer Angle: 45
from Greenleaf Corporation
80 degree diamond insert, precision finishing config [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond; Chipbreaker
- I.C.: 0.500
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Grade: IC328
- Thickness: 0.126
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.079
- Thickness: 0.219
- Chamfer Angle: 45
from Greenleaf Corporation
Positive diamond geometry, no hole configuration [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond
- I.C.: 0.375
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Milling
- Radius: 0.020
- Thickness: 0.193
- Grade: IC28
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Chamfer Angle: 60
- Thickness: 0.219
- Material: Cast Iron
from Greenleaf Corporation
Positive flat top configuration, no hole [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond
- I.C.: 0.500
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Chamfer Angle: 45
- Thickness: 0.188
- Coating: None
from Greenleaf Corporation
Negative diamond insert, rough stuff configuration [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond; Chipbreaker
- I.C.: 0.500
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Chamfer Angle: 45
- Thickness: 0.188
- Material: Cast Iron
from Greenleaf Corporation
80 ° trigon chip control configuration, screw on [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Trigon; Chipbreaker
- I.C.: 0.250
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Chamfer Angle: 45
- Thickness: 0.188
- Material: Cast Iron
from Greenleaf Corporation
80 ° trigon finishing configuration [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Trigon; Chipbreaker
- I.C.: 0.375
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.118
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
80 ° trigon flat top config [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Trigon
- I.C.: 0.375
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.118
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
55 degree diamond insert, flat top config [See More]
- Application: Milling; Turning
- Tip Angle: 55°
- Shape: Diamond
- I.C.: 0.500
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.118
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
80 degree diamond insert, flat top config [See More]
- Application: Milling; Turning
- Tip Angle: 80°
- Shape: Diamond
- I.C.: 0.500
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.079
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative round geometry, screw on configuration [See More]
- Application: Milling; Turning
- I.C.: 0.375
- Shape: Circular
- Thickness: 0.125
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.079
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative round geometry, not hole configuration [See More]
- Application: Milling; Turning
- I.C.: 0.375
- Shape: Circular
- Thickness: 0.125
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.079
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative square geometry, screw on configuration [See More]
- Application: Milling; Turning
- Tip Angle: 90°
- Shape: Square
- I.C.: 0.500
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.039
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Negative square geometry, no hole configuration [See More]
- Application: Milling; Turning
- Tip Angle: 90°
- Shape: Square
- I.C.: 0.375
from Sandvik Coromant Co.
Auto Roughing insert for milling [See More]
- Application: Milling
- Radius: 0.039
- Thickness: 0.188
- Chamfer Angle: 45
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Application: Milling; Turning
- Tip Angle: 60°
- Shape: Triangle
- I.C.: 0.375