60° Cutting Tool Inserts
12 Results
High Shear Milling Insert -- TPCB-43P8F-R
from Greenleaf Corporation
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Boring; Turning
- I.C.: 0.500
QDSI 34 -- TCGT-06T102
from Allied Machine & Engineering Corp.
from Allied Machine & Engineering Corp.
ANSI designation TCGT 1.2(1.2)05, positive rake to reduce cutting forces [See More]
- Tip Angle: 60°
- Shape: Triangle; Indexable; Chipbreaker
- Application: Drilling
- I.C.: 0.156
Negative Triangle Insert -- TNGA-331
from Greenleaf Corporation
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.375
Negative Triangle Insert -- TNGN-222
from Greenleaf Corporation
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.250
Positive Flat Top Triangle Insert -- TPGN-221
from Greenleaf Corporation
from Greenleaf Corporation
Triangle geometry, no hole configuration [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.250
Triangle Chip Control Insert -- TNGG-330.3-TF
from Greenleaf Corporation
from Greenleaf Corporation
Triangle chip control insert, precision finishing config [See More]
- Tip Angle: 60°
- Shape: Triangle; Chipbreaker
- Application: Milling; Turning
- I.C.: 0.375
Triangle Flat Top Insert -- TNGN-222
from Greenleaf Corporation
from Greenleaf Corporation
Triangle insert, flat top config, no hole [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.250
Triangle Flat Top Insert -- TNMA-222
from Greenleaf Corporation
from Greenleaf Corporation
Triangle insert, flat top config [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.250
Triangle Flat Top Insert -- TNUN-321
from Greenleaf Corporation
from Greenleaf Corporation
Triangle insert, flat top config, no hole [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.375
Triangle Positive Flat Top Insert -- TP-41
from Greenleaf Corporation
from Greenleaf Corporation
Positive flat top configuration [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.250
Triangle Positive Flat Top Insert -- TPGN-221
from Greenleaf Corporation
from Greenleaf Corporation
Triangle flat top configuration, no hole [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.250
Triangle Positive Flat Top Insert -- TPUN-321
from Greenleaf Corporation
from Greenleaf Corporation
Triangle flat top configuration, no hole [See More]
- Tip Angle: 60°
- Shape: Triangle
- Application: Milling; Turning
- I.C.: 0.375