Carbide Cutting Tool Inserts
from Hyperion Materials & Technologies
Broad range of rotary cutting tools for a multitude of cutting applications, including face masks, medical, and hygiene products. [See More]
- Material: Carbide; Cermet
- Application: Threading
from SCT - Scientific Cutting Tools, Inc.
SCT indexable boring bars consist of micro grain carbide shanks with heat-treated steel heads. Select tools are crafted with a unique top cut which strengthens the pocket by 40% and directs chips away from the cut zone. Bars are stocked with or without flats. Inserts are available uncoated or in... [See More]
- Material: Carbide
- Shape: Diamond; Triangle
- Application: Boring
- I.C.: 0.156
from Allied Machine & Engineering Corp.
Original T-A ® is an excellent choice for general purpose use. The design provides fast penetration rates that produce good hole size and finish. Standard geometry combines highly efficient and stable cutting action to minimize power consumption. Recommended for use in most steels, cast irons,... [See More]
- Material: Carbide; C2
- Shape: Spade Drill
- Application: Drilling
- Special Tip Angle: 132
from Stanley Engineered Fastening - Spiralock
Spiralock ® is a unique and proprietary preload locking internal (female) thread form that's exceptionally resistant to transverse vibration -- the primary cause of thread loosening. Proven in thousands of applications, Spiralock threaded holes and nuts accept standard male fasteners, eliminate... [See More]
- Material: Carbide
- Shape: Triangle (optional feature); Square (optional feature); Single, Multi-Tooth
- Application: Threading
- Tip Angle: 60° (optional feature); 90° (optional feature)
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
35 ° diamond chip control insert, precision finishing config [See More]
- Material: Carbide
- Shape: Diamond; Chipbreaker
- Application: Milling; Turning
- Tip Angle: 35°
from Dorian Tool International, Inc.
Dorian Tool offers a wide range of high performance tooling to cover the needs of a wide range of industries. Whether machining parts for automotive, aerospace, oil, defense or other industrial applications; large parts or small; no matter the size or complexity, the unmatched quality of Dorian Tool... [See More]
- Material: Carbide
- Shape: Circular (optional feature); Diamond (optional feature); Triangle (optional feature); Trigon (optional feature); Square (optional feature); Rhombic (optional feature)
- Application: Boring (optional feature); Turning (optional feature)
- Tip Angle: 35° (optional feature); 55° (optional feature); 60° (optional feature); 80° (optional feature); 90° (optional feature)
from Aloris Tool Technology Co., Inc.
Accommodates standard triangular negative rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. [See More]
- Material: Carbide
- Shape: Triangle; Square; Chipbreaker
- Application: Turning; Facing
- Tip Angle: 80°
from Allied Machine & Engineering Corp.
GEN2 T-A ® drill inserts provide lower drilling forces, increased drill stability, smoother breakout on through-hole and allows for improved chip formation. These inserts feature AMEC's exclusive AM200 ® coating for increased tool life. [See More]
- Material: Carbide
- Shape: Spade Drill
- Application: Drilling
- Coating: None
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
35 ° diamond insert, flat top config [See More]
- Material: Carbide
- Shape: Diamond
- Application: Milling; Turning
- Tip Angle: 35°
from Allied Machine & Engineering Corp.
- Material: Carbide
- Shape: Rectangular
- Application: Threading
- Thickness: 0.080
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
55 degree diamond insert, precision finishing config [See More]
- Material: Carbide
- Shape: Diamond; Chipbreaker
- Application: Milling; Turning
- Tip Angle: 55°
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
80 degree diamond insert, precision finishing config [See More]
- Material: Carbide
- Shape: Diamond; Chipbreaker
- Application: Milling; Turning
- Tip Angle: 80°
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Grooving; Turning
- Thickness: 0.098
from Greenleaf Corporation
Positive flat top configuration, no hole [See More]
- Material: Carbide
- Shape: Diamond
- Application: Milling; Turning
- Tip Angle: 80°
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
80 ° trigon chip control configuration, screw on [See More]
- Material: Carbide
- Shape: Trigon; Chipbreaker
- Application: Milling; Turning
- Tip Angle: 80°
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
80 ° trigon finishing configuration [See More]
- Material: Carbide
- Shape: Trigon; Chipbreaker
- Application: Milling; Turning
- Tip Angle: 80°
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
80 ° trigon flat top config [See More]
- Material: Carbide
- Shape: Trigon
- Application: Milling; Turning
- Tip Angle: 80°
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. The J-type... [See More]
- Material: Carbide
- Shape: Rhombic; Indexable; Chipbreaker
- Application: Turning
- Thickness: 0.098
from Greenleaf Corporation
55 degree diamond insert, flat top config [See More]
- Material: Carbide
- Shape: Diamond
- Application: Milling; Turning
- Tip Angle: 55°
from Greenleaf Corporation
80 degree diamond insert, flat top config, no hole [See More]
- Material: Carbide
- Shape: Diamond
- Application: Milling; Turning
- Tip Angle: 80°
from Greenleaf Corporation
80 degree diamond insert, flat top config [See More]
- Material: Carbide
- Shape: Diamond
- Application: Milling; Turning
- Tip Angle: 80°
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Material: Carbide
- Shape: Groove/Turn Shape
- Application: Boring; Turning
- Tip Angle: 90°
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Material: Carbide
- Shape: Groove/Turn Shape
- Application: Boring; Turning
- Tip Angle: 90°
from Greenleaf Corporation
A high-performance grade for milling steels at high speed. Should be used when milling forged and cast steels and selected ductile irons. A unique combination fo toughness and heat resistance makes it suitable for heavy and light duty milling at high speeds. [See More]
- Material: Carbide
- Shape: Square
- Application: Boring; Turning
- Tip Angle: 90°
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Material: Carbide
- Shape: Triangle
- Application: Boring; Turning
- Tip Angle: 60°
from Greenleaf Corporation
Holemill insert, screw on configuration [See More]
- Material: Carbide
- Shape: Square; Chipbreaker
- Application: Boring; Turning
- Tip Angle: 90°
from Greenleaf Corporation
A high-performance grade for milling steels at high speed. [See More]
- Material: Carbide
- Shape: Rectangular
- Application: Boring; Turning
- Special Tip Angle: 84
from Greenleaf Corporation
A high-performance grade for milling steels at high speed. Should be used when milling forged and cast steels and selected ductile irons. A unique combination fo toughness and heat resistance makes it suitable for heavy and light duty milling at high speeds. [See More]
- Material: Carbide
- Shape: Rectangular
- Application: Boring; Turning
- Thickness: 0.312
from Greenleaf Corporation
A high-performance grade for milling steels at high speed. Should be used when milling forged and cast steels and selected ductile irons. A unique combination fo toughness and heat resistance makes it suitable for heavy and light duty milling at high speeds. [See More]
- Material: Carbide
- Shape: Rectangular
- Application: Boring; Turning
- Thickness: 0.312
from Greenleaf Corporation
Rectangular geometry, screw on configuration [See More]
- Material: Carbide
- Shape: Rectangular
- Application: Boring; Turning
- Special Tip Angle: 30
from Greenleaf Corporation
Radius forming insert, screw on [See More]
- Material: Carbide
- Shape: Square; Chipbreaker
- Application: Milling; Turning
- Tip Angle: 90°
from Greenleaf Corporation
Circular geometry, screw on configuration [See More]
- Material: Carbide
- Shape: Circular
- Application: Boring; Turning
- I.C.: 1.000
from Greenleaf Corporation
Rectangular geometry, no hole configuration [See More]
- Material: Carbide
- Shape: Rectangular
- Application: Boring; Turning
- Thickness: 0.250
from Greenleaf Corporation
Round insert, flat top config, no hole [See More]
- Material: Carbide
- Shape: Circular
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Round insert, flat top config [See More]
- Material: Carbide
- Shape: Circular
- Application: Milling; Turning
- I.C.: 0.375