Drilling Cutting Tool Inserts
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Process: Physical Vapor Deposition
from Allied Machine & Engineering Corp.
Original T-A ® is an excellent choice for general purpose use. The design provides fast penetration rates that produce good hole size and finish. Standard geometry combines highly efficient and stable cutting action to minimize power consumption. Recommended for use in most steels, cast irons,... [See More]
- Application: Drilling
- Special Tip Angle: 132
- Shape: Spade Drill
- I.C.: 0.512
from Reid Supply
Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of... [See More]
- Application: Drilling
- Grade: IC328
- Thickness: 0.150
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Material: Heat resistant and titanium all
from Allied Machine & Engineering Corp.
T-A ® Flat Bottom Drill Inserts are made of either Super Cobalt or Carbide substrates as follows: Series Y through 2.5 are available in Super Cobalt and Carbide, while series 3 & 4, offered in range:1.353" (34,36mm) to 2.570" (65,28mm), are only available in Super Cobalt. The Super Cobalt base... [See More]
- Application: Drilling
- Special Tip Angle: 180
- Shape: Rectangular
- I.C.: 0.689
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Process: Physical Vapor Deposition
from Allied Machine & Engineering Corp.
GEN3SYS ® Drill Inserts and Holders penetrate up to 35% faster than competitive drilling products. Allied's AM200 ® coating increases tool life up to 50% when compared tocompetitor's premium coatings. [See More]
- Application: Drilling
- Material: C1 AM200®
- Shape: Spade Drill
- Coating: None
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Process: Physical Vapor Deposition
from Allied Machine & Engineering Corp.
GEN2 T-A ® drill inserts provide lower drilling forces, increased drill stability, smoother breakout on through-hole and allows for improved chip formation. These inserts feature AMEC's exclusive AM200 ® coating for increased tool life. [See More]
- Application: Drilling
- Material: Cobalt
- Shape: Spade Drill
- Coating: None
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Material: Heat resistant and titanium all
from Allied Machine & Engineering Corp.
Allied'sAccuPort 432 ® Port Contour Cutters are produced to strict manufacturing tolerances. This provides the customer with the assurance that the forms produced are within the finish tolerances of each specification. [See More]
- Application: Drilling
- Coating: None
- Shape: Circular
- Quantity: 1
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Process: Physical Vapor Deposition
from Allied Machine & Engineering Corp.
High Performance Spade Drills (HP) were designed for end-users who hadUniversal Style holders, but were looking for improved performance. HP spade drills fit into the Universal holders, but offer the high-tech geometry and performance benefits of the T-A ®drill inserts. [See More]
- Application: Drilling
- Special Tip Angle: 130
- Shape: Spade Drill
- Thickness: 0.188
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Process: Physical Vapor Deposition
from Allied Machine & Engineering Corp.
T-A ® Structural Steel Drilling System is designed for use on structural steel materials, this system delivers outstanding performance and durability.TiAlN insert coating increases tool life while providing better hole tolerances. [See More]
- Application: Drilling
- Thickness: 0.125
- Shape: Spade Drill
- Material: Cobalt
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Material: Heat resistant and titanium all
from Allied Machine & Engineering Corp.
Universal Style Spade Drills and Universal Holders are manufactured by Allied, to allow end-users a larger diameter range. The diameter size for the Universal Spade Drill ranges from 1" to 8 1/2". Tool life is improved when coated with TiN, TiCN, and TiAlN, while unique tool geometry reducees thrust... [See More]
- Application: Drilling
- Special Tip Angle: 130
- Shape: Spade Drill
- Thickness: 0.188
from Sandvik Coromant Co.
CoroDrill ® 800 insert for drilling [See More]
- Application: Drilling
- Radius: 0.031
- Thickness: 0.125
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 870 drill tip [See More]
- Application: Drilling
- Process: Physical Vapor Deposition
- Thickness: 0.164
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.012
- Thickness: 0.087
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.087
- Process: MTCVD
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.087
- Process: MTCVD
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.087
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.094
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.094
- Process: MTCVD
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.020
- Thickness: 0.094
- Process: MTCVD
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.020
- Thickness: 0.094
- Process: MTCVD
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.020
- Thickness: 0.094
- Process: MTCVD
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.020
- Thickness: 0.094
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 880 insert for drilling [See More]
- Application: Drilling
- Radius: 0.020
- Thickness: 0.102
- Coating: None
from Sandvik Coromant Co.
CoroDrill ® 881 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.094
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 881 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.094
- Process: Physical Vapor Deposition
from Sandvik Coromant Co.
CoroDrill ® 881 insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.094
- Process: MTCVD
from Sandvik Coromant Co.
Coromant U insert for drilling [See More]
- Application: Drilling
- Radius: 0.016
- Thickness: 0.094
- Process: Physical Vapor Deposition