Triangle Cutting Tool Inserts
from SCT - Scientific Cutting Tools, Inc.
SCT indexable boring bars consist of micro grain carbide shanks with heat-treated steel heads. Select tools are crafted with a unique top cut which strengthens the pocket by 40% and directs chips away from the cut zone. Bars are stocked with or without flats. Inserts are available uncoated or in... [See More]
- Shape: Diamond; Triangle
- I.C.: 0.156
- Application: Boring
- Thickness: 0.040
from Allied Machine & Engineering Corp.
ANSI designation TCGT 1.2(1.2)05, positive rake to reduce cutting forces [See More]
- Shape: Triangle; Indexable; Chipbreaker
- Tip Angle: 60°
- Application: Drilling
- I.C.: 0.156
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Boring; Turning
- I.C.: 0.500
from Aloris Tool Technology Co., Inc.
Accommodates standard triangular negative rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. [See More]
- Shape: Triangle; Square; Chipbreaker
- Tip Angle: 80°
- Application: Turning; Facing
- Material: Carbide
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Triangle geometry, screw on configuration [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
Triangle geometry, no hole configuration [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
Triangle chip control insert, precision finishing config [See More]
- Shape: Triangle; Chipbreaker
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Triangle insert, flat top config, no hole [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
Triangle insert, flat top config [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
Triangle insert, flat top config, no hole [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Positive flat top configuration [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
Triangle flat top configuration, no hole [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
Triangle flat top configuration, no hole [See More]
- Shape: Triangle
- Tip Angle: 60°
- Application: Milling; Turning
- I.C.: 0.375