Diamond Cutting Tool Inserts
from SCT - Scientific Cutting Tools, Inc.
SCT indexable boring bars consist of micro grain carbide shanks with heat-treated steel heads. Select tools are crafted with a unique top cut which strengthens the pocket by 40% and directs chips away from the cut zone. Bars are stocked with or without flats. Inserts are available uncoated or in... [See More]
- Shape: Diamond; Triangle
- I.C.: 0.156
- Application: Boring
- Thickness: 0.040
from Allied Machine & Engineering Corp.
ANSI designation CCGT 2(1.5)0.5, positive rake to reduce cutting forces [See More]
- Shape: Diamond; Indexable; Chipbreaker
- Tip Angle: 80°
- Application: Drilling
- I.C.: 0.250
from Greenleaf Corporation
35 ° diamond chip control insert, precision finishing config [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 35°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
35 ° diamond insert, flat top config [See More]
- Shape: Diamond
- Tip Angle: 35°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
35 ° diamond insert, screw on configuration [See More]
- Shape: Diamond
- Tip Angle: 35°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
A complete API ring groove tooling solution. Finish API ring grooves in Inconel 625 clad overlay in less than a minute. [See More]
- Shape: Diamond
- Tip Angle: 35°
- Application: Milling
- Thickness: 0.250
from Greenleaf Corporation
55 degree diamond insert, precision finishing config [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 55°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Negative geometry, screw on configuration [See More]
- Shape: Diamond
- Tip Angle: 55°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Negative geometry, no hole [See More]
- Shape: Diamond
- Tip Angle: 55°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Negative diamond insert, screw on configuration [See More]
- Shape: Diamond
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Negative diamond insert, no hole [See More]
- Shape: Diamond
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.750
from Greenleaf Corporation
80 degree diamond insert, precision finishing config [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Positive diamond geometry, no hole configuration [See More]
- Shape: Diamond
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Positive flat top configuration, no hole [See More]
- Shape: Diamond
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Negative diamond insert, rough stuff configuration [See More]
- Shape: Diamond; Chipbreaker
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
55 degree diamond insert, flat top config [See More]
- Shape: Diamond
- Tip Angle: 55°
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
80 degree diamond insert, flat top config [See More]
- Shape: Diamond
- Tip Angle: 80°
- Application: Milling; Turning
- I.C.: 0.500