80° Cutting Tool Inserts
from Aloris Tool Technology Co., Inc.
Accommodates standard triangular negative rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. [See More]
- Tip Angle: 80°
- Shape: Triangle; Square; Chipbreaker
- Application: Turning; Facing
- Material: Carbide
from Allied Machine & Engineering Corp.
ANSI designation CCGT 2(1.5)0.5, positive rake to reduce cutting forces [See More]
- Tip Angle: 80°
- Shape: Diamond; Indexable; Chipbreaker
- Application: Drilling
- I.C.: 0.250
from Greenleaf Corporation
Negative diamond insert, screw on configuration [See More]
- Tip Angle: 80°
- Shape: Diamond
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Negative diamond insert, no hole [See More]
- Tip Angle: 80°
- Shape: Diamond
- Application: Milling; Turning
- I.C.: 0.750
from Greenleaf Corporation
80 degree diamond insert, precision finishing config [See More]
- Tip Angle: 80°
- Shape: Diamond; Chipbreaker
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Positive diamond geometry, no hole configuration [See More]
- Tip Angle: 80°
- Shape: Diamond
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
Positive flat top configuration, no hole [See More]
- Tip Angle: 80°
- Shape: Diamond
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Negative diamond insert, rough stuff configuration [See More]
- Tip Angle: 80°
- Shape: Diamond; Chipbreaker
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
80 ° trigon chip control configuration, screw on [See More]
- Tip Angle: 80°
- Shape: Trigon; Chipbreaker
- Application: Milling; Turning
- I.C.: 0.250
from Greenleaf Corporation
80 ° trigon finishing configuration [See More]
- Tip Angle: 80°
- Shape: Trigon; Chipbreaker
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
80 ° trigon flat top config [See More]
- Tip Angle: 80°
- Shape: Trigon
- Application: Milling; Turning
- I.C.: 0.375
from Greenleaf Corporation
80 degree diamond insert, flat top config [See More]
- Tip Angle: 80°
- Shape: Diamond
- Application: Milling; Turning
- I.C.: 0.500
from Greenleaf Corporation
Negative trigon geometry, screw on configuration [See More]
- Tip Angle: 80°
- Shape: Trigon
- Application: Milling; Turning
- I.C.: 0.375