Cleaning / Surface Preparation Abrasive Blast Machines and Sandblasters
from Composition Materials Co., Inc.
A high volume, high efficiency dust collection system at low operating cost from Envirosystems Equipment Company Inc. is widely marketed by Composition Materials Co. Whether the job calls for surface preparation, coatings removal, deflashing or any other industrial cleaning operation, this... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Machine Mounting: Floor / Skid
from Campbell Hausfeld
The Campbell Hausfeld sand blaster (AT122601AV) is an ideal air tool for removing rust, scale and paint from small parts and equipment. The siphon-feed spray gun is designed to deliver most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide, walnut shells and more. This... [See More]
- Operation: Cleaning / Surface Preparation; Remove Rust, Scale and Paint
- Abrasive Feed: Dry / Air
- Nozzles / Wheels: 1
- Machine Mounting: Handheld
from AIRBRASIVE
With its 20 lb powder capacity, the Model HME has the ability to micro sand blast on a non-stop, round the clock basis. It is designed for heavy duty operation on continuous production lines. The special long life fittings at critical wear points aid in longer operation. These units can be easily... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation
- Pressure: 140
- Blast / Jet Machine Type: Precision Blast / Micro-jet
- Abrasive Flow: 0.1213
from Sinto America
• Consistent and Highly Efficient Finishing. • Zero Pinch Design Eliminates Jams. • Reduces Maintenance and Minimizes Downtime. • Smooth, Reliable Loading and Unloading. • Custom Options and Capabilities [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Power: 60.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Abrasive Feed: Dry / Air
from Proceco Ltd.
Proceco Slurry Blasting is the ultimate metal component blast-finishing process designed to degrease, blast clean, aqueous clean, and rust inhibit in one system. No need for complementary process equipment. Proceco Slurry Blasting, also known as wet blasting, is a patented technology that uses a... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping; De-Oiling
- Pressure: 70
- Blast / Jet Machine Type: Wheel Blast Machine
- Power: 20.00
from LS Industries
Integrated “door open ” safety switch prevents accidental operation. Dual door operation switches position for operator safety. Sealed dust containment in dust collector with fire resistant filter elements to trap dirt, rust and paint particles. Steel frame and cabinet construction. The... [See More]
- Operation: Cleaning / Surface Preparation; Descaling / Stripping
- Power: 10.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Abrasive Feed: Dry / Air
from Additive Manufacturing Technologies (AMT), Inc.
PostProDP is an unpack and depowdering system. The 'cake' emerging from the 3D Printer contains the printed parts and unfused powder. Our technology cools the cake and removes the powder from the part. The powder is recovered and recycled. Not only does this allow more powder to be collected but... [See More]
- Operation: Cleaning / Surface Preparation
from Composition Materials Co., Inc.
Provides workers with a clean, safe, well-lighted, dust-free environment. Protects workers in adjacent areas from dust and fumes. Sizes vary from 8x8x8 to 14x10x25, providing the right solution for every job [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Machine Mounting: Blast Room / Cutting Booth; Floor / Skid
from AIRBRASIVE
The model 6500 is an innovative, all-pneumatic micro-blasting machine. This unit was designed with portability in mind and for ease in field use. Unlike our previous units which require electricity to stimulate powder into the air stream via an electrical vibrator, the 6500 vibration is generated by... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation
- Pressure: 140
- Blast / Jet Machine Type: Precision Blast / Micro-jet
- Abrasive Flow: 0.0882
from Sinto America
Benefits: • Easily handles heavy work pieces. • Complicated weldments and castings. • No part on part contact. • No blind shot angles (rotation and traversing of parts in blast). • Custom Options and Capabilities [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Power: 15.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Nozzles / Wheels: 2
from Proceco Ltd.
Proceco Slurry Blasting is the ultimate metal component blast-finishing process designed to degrease, blast clean, aqueous clean, and rust inhibit in one system. No need for complementary process equipment. Proceco Slurry Blasting, also known as wet blasting, is a patented technology that uses a... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping; De-Oiling
- Pressure: 70
- Blast / Jet Machine Type: Wheel Blast Machine
- Power: 40.00
from LS Industries
Easy operation with LS Industries Cylinder Shot Blaster. The LSE20 has many time saving features. The pneumatic cylinder lift does the lifting. After the cylinder has been raised to the horizontal position, ball transfer rollers permit easy cylinder loading into the blast chamber. Two 2" Manganese... [See More]
- Operation: Cleaning / Surface Preparation; Descaling / Stripping
- Power: 10.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Abrasive Feed: Dry / Air
from Additive Manufacturing Technologies (AMT), Inc.
Introducing the world's only automated surface modification technology that achieves an injection molded surface quality and materials properties in polymer 3D printed parts. Compatible with over 90 materials in parts printed using Laser Sintering, HP Multi Jet Fusion, High Speed Sintering, or Fused... [See More]
- Operation: Cleaning / Surface Preparation
- Workpiece Material: Metal; Plastic; Other; All 3D printed materials
from AIRBRASIVE
Our Model H unit gives high volume producers the ability to Micro-Blast parts on production lines or in labs. This sturdy machine has been designed to accommodate both intermittent or continuous operations. Powder flow lines are reinforced with tungsten carbide fittings for the utmost reliability in... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation
- Pressure: 140
- Blast / Jet Machine Type: Precision Blast / Micro-jet
- Abrasive Flow: 0.0882
from Sinto America
Direct Drive Blast Wheel. 3 Phase Operation. Continuous Molded Rubber Belt. Low Noise Level. Safety Interlocks. Reversing Mill. Automatic Timer Controls. Machine Warranty. Lip Separator. Custom Options and Capabilities [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Power: 15.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Nozzles / Wheels: 1
from LS Industries
The first Abrasive Shot Blaster designed especially for Steel Drums and Barrels. Blast clean the toughest drums in less than 2 minutes. The standard dual 10HP impeller motors and dual balanced impeller wheels provide the coverage necessary to quickly and efficiently clean each drum. Standard model... [See More]
- Operation: Cleaning / Surface Preparation; Descaling / Stripping
- Power: 10.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Abrasive Feed: Dry / Air
from Additive Manufacturing Technologies (AMT), Inc.
The PostPro3DMini® offers all the advantages of the PostPro3D® machine, but in a more compact unit for smaller production runs, STEM programs and design studios. [See More]
- Operation: Cleaning / Surface Preparation
- Workpiece Material: Metal; Plastic; Other; All 3D printed materials
from AIRBRASIVE
Our Model K is one of the most popular in the product line. It is ideal for lab use or pilot production research. It holds the same amount of powder as our 6500 but incorporates an air patented electro-magnetic vibratory feed system for powder delivery. It incorporates separate controls for pressure... [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation
- Pressure: 140
- Blast / Jet Machine Type: Precision Blast / Micro-jet
- Abrasive Flow: 0.0882
from Sinto America
Benefits: • Low Cycle Times. • Compact Design. • No Part on Part Contact. • Single Operator. • Superior Cleaning Efficiency. • Chemical Free Process. • Custom Options and Capabilities [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Power: 10.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Nozzles / Wheels: 2
from LS Industries
Cylinders are loaded onto the lift and moved to a semi vertical position. The lift table is powered and rolls the cylinders automatically while the lance is introduced into the tanks. When the cleaning cycle is completed, the lance returns to the load position. On the return stroke, the lance blows... [See More]
- Operation: Cleaning / Surface Preparation; Descaling / Stripping
- Abrasive Feed: Dry / Air
- Blast / Jet Machine Type: Nozzle Blast Machine
- Machine Mounting: Blast Cabinet / Enclosure; Floor / Skid
from Sinto America
Abrasive Resistant Liners and Cabinet. Low Noise Level. Safety Interlocks Unique Roll Up Door. Automatic Timer Controls. Custom Options and Capabilities [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Power: 15.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Nozzles / Wheels: 1
from LS Industries
All LS Industries ’ blasters are built from the ground up with dependability in mind. LS blasters are built from rugged steel and alloy steel with welded construction. Replaceable “wear resistant ” liner materials are strategically positioned inside the cabinet, to absorb the brunt... [See More]
- Operation: Cleaning / Surface Preparation; Descaling / Stripping
- Nozzles / Wheels: 6
- Blast / Jet Machine Type: Wheel Blast Machine
- Abrasive Feed: Gravity Feed
from Sinto America
Benefits: Cost Effective. Minimum Maintenance. Reduced Floor Space Requirements. Superior Cleaning Efficiency. No Expensive Foundations Required. Integrated Dust Collector. Chemical-Free Process. Custom Options and Capabilities [See More]
- Operation: Deburring / Deflashing; Cleaning / Surface Preparation; Descaling / Stripping
- Power: 10.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Nozzles / Wheels: 2
from LS Industries
Two Turbo Shot ™ impellers, one each, balanced overhead, and under throw. Long life impeller housing with easily replaced liners and impeller blades. Sealed bearings for longer bearing life Abrasive feed system includes augers and bucket elevator. Access doors for impeller wheels and for... [See More]
- Operation: Cleaning / Surface Preparation; Descaling / Stripping
- Power: 30.00
- Blast / Jet Machine Type: Wheel Blast Machine
- Nozzles / Wheels: 2