Pavement / Walkway Industrial Paints
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Coverage: 400 to 882
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway
- Chemistry: Epoxy; Resin
- Type: Clear Coat
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Form: Liquid; Solvent
from FORREST Technical Coatings
A high-performance, two-part polyamide epoxy system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications. [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Coverage: 400 to 882
from FORREST Technical Coatings
A two-component, specially-modified, polyamide-cured, high-build epoxy primer providing a very fast-dry topcoat and excellent resistance to corrosive and abrasive environments. Less than 2.8 lbs/gallon VOCs. [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Coverage: 400 to 882
from FORREST Technical Coatings
A two-component, high-solids, chemical and corrosion resistant modified polyamidoamine epoxy formulated for excellent protection in severe environments. This product uses a special modified polyamidoamine curing agent that imparts the best properties of both amines and conventional polyamides. [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Coverage: 425 to 962
from Aervoe Industries Incorporated
Cost-effective, provides good visibility in the two-month range [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Cure Temperature: 50 to 100
from Chase Products Co.
Champion Sprayon ® Field Marking Paint is designed for use on grass, dirt and other unpaved surfaces. The discharge valve sprays only in a downward position. The universal tip fits all machines. Use it with a Champion Sprayon Paint Striper. Stripes 600-800 linear feet. Now toluene free; won't... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Rust-Oleum Corporation
Industrial food and beverage coating, prevents mold & mildew growth [See More]
- Location / Orientation: Interior; Floor; Wall; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Coverage: 625 to 740
from Sherwin-Williams Protective & Marine Coatings
Hotline ® LATEX TRAFFIC PAINTS are very fast drying paints for use in marking parking lots, airports, and roads. TM2152 and TM2153 may be applied ambient airless or conventional, or may be heated for even faster dry. TM2152 and TM2153 conform to current VOC regulations and to the requirements... [See More]
- Location / Orientation: Exterior; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Acrylic; Resin
- Thickness: 0.0150
from Chase Products Co.
Champion Sprayon ® Field Marking Paint is designed for use on grass, dirt and other unpaved surfaces. The discharge valve sprays only in a downward position. The universal tip fits all machines. Use it with a Champion Sprayon Paint Striper. Stripes 600-800 linear feet. Now toluene free; won't... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Sherwin-Williams Protective & Marine Coatings
ProMar ® ALKYD FAST DRY ZONE MARKING PAINT is a fast drying, medium oil alkyd in two colors, white and yellow, conforming to U.S. Bureau of Public Roads colors. Quick drying. High visibility colors. Ready to use. Durable. RECOMMENDED USAGE. For asphalt, concrete, brick, and other surfaced... [See More]
- Location / Orientation: Exterior; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Thickness: 0.0150
from Chase Products Co.
Champion Sprayon ® Field Marking Paint is designed for use on grass, dirt and other unpaved surfaces. The discharge valve sprays only in a downward position. The universal tip fits all machines. Use it with a Champion Sprayon Paint Striper. Stripes 600-800 linear feet. Now toluene free; won't... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Sherwin-Williams Protective & Marine Coatings
ProMar ° VOC Compliant Acrylic Copolymer Traffic Paint is a conventional dry (non-heat applied) acetone based paint. Acetone, as the main solvent, has Exempt Status under Federal law and does not contribute harmful VOC °s. ProMart ° VOC Compliant Acrylic Traffic Paint is 100% acrylic,... [See More]
- Location / Orientation: Exterior; Pavement / Walkway
- Thickness: 0.0150
- Chemistry: Acrylic; Resin; Acetone-Based
- Form: Liquid
from Chase Products Co.
Champion Sprayon ® Field Marking Paint is designed for use on grass, dirt and other unpaved surfaces. The discharge valve sprays only in a downward position. The universal tip fits all machines. Use it with a Champion Sprayon Paint Striper. Stripes 600-800 linear feet. Now toluene free; won't... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Sherwin-Williams Protective & Marine Coatings
Setfast ® ACRYLIC LATEX TRAFFIC MARKING PAINT is a conventional dry (non-heated application) water based paint intended for use in marking parking lots, airports, and roads. TM2160, and TM2161 conform to current VOC regulations, and may be used for general applications where specific... [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Acrylic; Resin
- Thickness: 0.0150
from Chase Products Co.
Champion Sprayon ® Field Marking Paint is designed for use on grass, dirt and other unpaved surfaces. The discharge valve sprays only in a downward position. The universal tip fits all machines. Use it with a Champion Sprayon Paint Striper. Stripes 600-800 linear feet. Now toluene free; won't... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Sherwin-Williams Protective & Marine Coatings
SETFAST ® Acrylic Zone Marking Paint is a conventional dry (non-heat applied) solvent based paint. It offers the following outstanding properties: Fast dry and hardness development. Excellent dirt pick-up resistance. High durability on concrete and asphalt surfaces. RECOMMENDED USAGE. SETFAST... [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Acrylic; Resin
- Thickness: 0.0150
from Chase Products Co.
Champion Sprayon ® Field Marking Paint is designed for use on grass, dirt and other unpaved surfaces. The discharge valve sprays only in a downward position. The universal tip fits all machines. Use it with a Champion Sprayon Paint Striper. Stripes 600-800 linear feet. Now toluene free; won't... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Sherwin-Williams Protective & Marine Coatings
Setfast ® PREMIUM ALKYD ZONE MARKING PAINT is a conventional dry (non-heat applied) solvent based zone marking paint. Abrasion resistant. Fast dry. High visibility. Glass beads can be added for making reflective markings. RECOMMENDED USAGE. Setfast ® Premium Alkyd has been developed for... [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Thickness: 0.0150
from Chase Products Co.
Champion Sprayon ® Inverted Paint can be used for handheld applications (accurate marking 5 ” to 12 ” above the ground), or with a Champion Sprayon Long or Short Wand. Spray on asphalt, concrete or other paved surfaces, or on dirt, grass or gravel. Lasts 4-6 months, depending upon... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Sherwin-Williams Protective & Marine Coatings
Setfast ® LOW VOC ACRYLIC TRAFFIC MARKING PAINT is a conventional dry (non-heat applied) acetone based paint. Acetone, as the main solvent, has Exempt Status under Federal law and does not contribute harmful VOCs. This is 100% acrylic, which offers the following outstanding properties: Faster... [See More]
- Location / Orientation: Interior; Exterior; Floor; Pavement / Walkway
- Cure / Setting Technology: Film Drying
- Chemistry: Acrylic; Resin; Acetone-Based
- Thickness: 0.0150
from Chase Products Co.
Champion Sprayon ® Inverted Paint can be used for handheld applications (accurate marking 5 ” to 12 ” above the ground), or with a Champion Sprayon Long or Short Wand. Spray on asphalt, concrete or other paved surfaces, or on dirt, grass or gravel. Lasts 4-6 months, depending upon... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90
from Chase Products Co.
Champion Sprayon ® Inverted Paint can be used for handheld applications (accurate marking 5 ” to 12 ” above the ground), or with a Champion Sprayon Long or Short Wand. Spray on asphalt, concrete or other paved surfaces, or on dirt, grass or gravel. Lasts 4-6 months, depending upon... [See More]
- Location / Orientation: Interior; Exterior; Pavement / Walkway
- Dispensing Method: Sprayable
- Form: Aerosol; Water
- Operating Temperature: 40 to 90