Steel Industrial Paints
from FORREST Technical Coatings
Stove Bright ® 1A62H241 Muffler Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Chemistry: Resin; Silicone; Zinc
- Coverage: 139
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Substrate: Steel; Aluminum; Ceramic; Metallic; Plastic; Other; Fiberglass
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Clear Coat
- Cure / Setting Technology: Film Drying; Multicomponent
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Substrate: Steel; Concrete; Metallic
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Coverage: 400 to 882
from FORREST Technical Coatings
An electrostatic developed specifically to minimize the electrostatic discharge (ESD) created when two surfaces with different voltages meet one another. When properly applied these coatings can prevent significant damage caused by electrostatic discharge. [See More]
- Substrate: Steel; Metallic; Plastic
- Form: Powder
- Cure / Setting Technology: Thermoset
- Dispensing Method: Sprayable
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Plastic; Wood; Other; Fiberglass
- Chemistry: Epoxy; Resin
- Type: Clear Coat
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Substrate: Steel; Aluminum; Metallic; Plastic; Wood
- Cure Temperature: 400
- Cure / Setting Technology: Thermoset
- Form: Powder
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Substrate: Steel; Aluminum; Metallic; Plastic; Wood
- Cure / Setting Technology: Thermoset
- Chemistry: Polyurethane; Resin; Polyester
- Cure Temperature: 400
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Substrate: Steel; Metallic
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Base Coat; Primer
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Substrate: Steel; Concrete; Metallic
- Cure / Setting Technology: Film Drying; Multicomponent
- Chemistry: Epoxy; Resin
- Form: Liquid; Solvent
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Substrate: Steel; Aluminum; Metallic; Plastic; Wood
- Cure / Setting Technology: Thermoset
- Chemistry: Polyurethane; Resin
- Cure Temperature: 400
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Substrate: Steel; Metallic
- Chemistry: Alkyd; Resin
- Type: Clear Coat
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
Rust-inhibitive barrier coatings for use on interior or exterior steel substrates and compatible with various top coats. These versatile primers are recommended for use on machinery, structural steel, agricultural equipment and fabricated metals. Most products are available in standard white, red... [See More]
- Substrate: Steel; Metallic
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Primer
- Form: Liquid; Solvent; Water
from FORREST Technical Coatings
We carry standard stock and RAL colors, but specialize in working with customers to create decorative and unique appearances for their specific needs. Our product catalog includes metallic, veins, textures and crinkle effects. We do expedient color matches and provide various other effects with... [See More]
- Substrate: Steel; Aluminum; Metallic; Plastic; Wood
- Cure / Setting Technology: Thermoset
- Chemistry: Epoxy; Resin
- Cure Temperature: 350 to 400
from FORREST Technical Coatings
FORREST Polyurethanes are designed to be long-lasting, highly-durable finishes with great color and gloss retention and excellent abrasion resistance. For use over multiple substrates in interior and exterior applications. 800 Series products comply with current environmental regulations in the... [See More]
- Substrate: Steel; Aluminum; Ceramic; Metallic; Plastic; Other; Fiberglass
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Clear Coat
- Cure / Setting Technology: Film Drying; Multicomponent
from FORREST Technical Coatings
Stove Bright ® 1A62H290 Satin Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
from FORREST Technical Coatings
Stove Bright ® 62M290 Satin Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 125
from FORREST Technical Coatings
Stove Bright ® 1A62H059 Metallic Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
from FORREST Technical Coatings
Stove Bright ® 62M059 Metallic Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 125
from FORREST Technical Coatings
Stove Bright ® 1A52H494 Sky Blue is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
from FORREST Technical Coatings
Stove Bright ® 1A52H700 Forest Green is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
from FORREST Technical Coatings
Stove Bright ® 1A62H201 Charcoal is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
from FORREST Technical Coatings
Stove Bright ® 62M201 Charcoal is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for brush-on... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 125
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other
- Cure / Setting Technology: Thermoplastic; Film Drying
- Chemistry: Resin; Silicone
- Coverage: 125 to 260
from FORREST Technical Coatings
Originally engineered for high temperature resistance, INFERNEX ® L-1200 has proven itself a reliable coating for more than 30 years due to its unique blend of pigments in a silicone polymer resin. Designed for rapid curing and good film integrity, this product also provides good corrosion... [See More]
- Substrate: Steel; Metallic
- Form: Liquid; Solvent
- Cure / Setting Technology: Film Drying
- Dispensing Method: Sprayable
from FORREST Technical Coatings
Originally developed for exhausts, PS-1000 has earned its reputation for decades as the workhorse for protecting exhaust systems, engines, and silencers. It ’s recognized by its black smooth finish and ability to withstand temperatures up to 1000 ° F (538 ° C). It also features... [See More]
- Substrate: Steel; Metallic
- Coverage: 93
- Cure / Setting Technology: Thermoset
- Cure Temperature: 450
from All-Spec Industries
The All-Spec CP100G-1 is a conductive formulation that has a water based coating manufactured with high quality acrylic latex and waterborne urethane. Produced to meet or exceed the ASTM-D-25780 specifications for conductivity and static decay rates. Use on floors, bench tops, tote boxes, etc. [See More]
- Substrate: Steel; Aluminum; Anodized; Ceramic; Concrete; Metallic; Plastic; Wood
- Chemistry: Acrylic; Resin
- Type: Base Coat
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Substrate: Steel; Metallic
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Base Coat; Enamel
- Cure / Setting Technology: Film Drying
from Dampney Company, Inc.
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F. It is designed to selectively absorb wavelengths with the greatest heat content when used on the metal surfaces of collector panels having glazed covers. It collects... [See More]
- Substrate: Steel; Aluminum; Metallic; Other; Stainless Steel
- Cure / Setting Technology: Thermoset (optional feature); Film Drying
- Chemistry: Resin; Silicone
- Coverage: 416
from Sherwin-Williams Protective & Marine Coatings
COPPER BOTTOM ANTI-FOULING PAINT #45 is a semihard, anti-fouling developed for the shallow draft trade. It offers a moderately high concentration loading of cuprous oxide and a chemically modified binder that only slightly dissolves upon immersion service. RECOMMENDED USAGE. Used for moderate... [See More]
- Substrate: Steel; Aluminum; Wood; Other; Iron, Galvanized
- Cure / Setting Technology: Film Drying
- Chemistry: Cuprous Oxide; Metal Filled
- Thickness: 0.0040 to 0.0050
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Substrate: Steel; Metallic
- Chemistry: Resin; Silicone; Zinc; Metal Filled
- Type: Base Coat
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
DRY FALLOUT SPRAY EG-SHEL WHITE is a fast drying alkyd white paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. Eight foot dry fallout. 86% light reflectance. High hiding. Easy cleanup. Interior use. RECOMMENDED USAGE. For use over... [See More]
- Substrate: Steel; Aluminum; Concrete; Wood; Other; Galvanizing, Drywall, Iron
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Thickness: 0.0060 to 0.0100
from Rust-Oleum Corporation
Modified silicone aluminum & colored finishes, high heat exposed surfaces [See More]
- Substrate: Steel; Metallic
- Chemistry: Aluminum; Resin; Silicone; Metal Filled
- Type: Clear Coat (optional feature); Primer (optional feature)
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
INDUSTRIAL ALUMINUM PAINT is an economical, one-package, interior / exterior, general purpose, leafing aluminum paint which produces a chrome-like uniform appearance and provides heat resistance up to 400 °F. Ultraviolet light resistant. Long term protection against weathering and moisture. Heat... [See More]
- Substrate: Steel; Aluminum; Concrete; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Aluminum; Resin; Metal Filled
- Thickness: 0.0030 to 0.0040
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
MACROPOXY 646 MR is a high build, fast drying epoxy designed to protect steel and resist mildew in industrial exposures. It is ideal for maintenance painting and fabrication shop applications. The product ’s high build properties ensure adequate protection of sharp edges, corners, and welds. [See More]
- Substrate: Steel
- Cure / Setting Technology: Film Drying
- Chemistry: Epoxy; Resin
- Thickness: 0.0070 to 0.0135
from Rust-Oleum Corporation
15 oz Aerosol; Safety Yellow; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
DRY FALL FLAT is a modified alkyd paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. High light reflectance, White. High hiding. Flash rust resistant. Eight foot dry fallout. Easy clean up. Interior use. RECOMMENDED USAGE. For use... [See More]
- Substrate: Steel; Aluminum; Concrete; Wood; Other; Galvanizing, Drywall, Iron
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Thickness: 0.0080 to 0.0120
from Rust-Oleum Corporation
15 oz, Aerosol Can; Red; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® ALUMINUM PAINT is a superior quality, one package, interior/exterior, general purpose aluminum paint formulated with 325-mesh leafing aluminum pigment, petroleum resin, and select oils producing a chrome-like uniform appearance. For service temperatures up to 400 °F. Resists... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Aluminum; Resin; Petroleum Resin & Select Oils; Metal Filled
- Thickness: 0.0025 to 0.0035
from Rust-Oleum Corporation
15 oz Aerosol; Flat Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® HEAVY DUTY RUST RESISTANT ALUMINUM PAINT is a superior quality, one package, interior/exterior aluminum paint formulated with 325 mesh leafing aluminum pigment to give excellent rust inhibition and heat resistance up to 400 °F. Excellent weathering characteristics. Maintains... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Aluminum; Resin; Metal Filled
- Thickness: 0.0030 to 0.0040
from Rust-Oleum Corporation
15 oz Aerosol; Gloss Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® HI-HEAT SILICONE ALKYD ALUMINUM PAINT is a heat cured, interior/exterior, ready mixed, silicone resin, modified with an alkyd and reinforced with 325-mesh extra fine aluminum flakes. For service temperatures between 500 °F - 1000 °F. Heat reflective. Resists... [See More]
- Substrate: Steel; Aluminum; Metallic; Other; Iron
- Cure / Setting Technology: Thermoset; Film Drying
- Chemistry: Alkyd; Aluminum; Resin; Silicone; 325-Mesh Extra Fine Aluminum Flakes; Metal Filled
- Thickness: 0.0030 to 0.0040
from Rust-Oleum Corporation
15 oz Aerosol Can; Gray; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® HI-HEAT RESISTING ALUMINUM PAINT is a ready-to-use high heat resisting paint for interior exposures providing heat resistance up to 700 °F. Heat reflective. Maintains "Sheen". Resists discoloration. RECOMMENDED USAGE. For use over prepared steel surfaces in normal and high... [See More]
- Substrate: Steel; Aluminum; Metallic; Other; Iron
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Aluminum; Resin; Metal Filled
- Thickness: 0.0020 to 0.0025
from Rust-Oleum Corporation
15 oz Aerosol; Dark Machine Gray; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
SUPER Save-Lite ® DRY FALL is a modified alkyd, intense white paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. High hiding. High light reflectance - 83%. Eight foot dry fallout. Suitable for use in USDA inspected facilities. [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Wood; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Thickness: 0.0060 to 0.0065
from Rust-Oleum Corporation
15 oz Aerosol; Gloss White; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
WATERBASED INDUSTRIAL ENAMEL is a proprietary technology, one-component, acrylic-modified alkyd with outstanding exterior performance properties. Outstanding exterior durability. High Gloss. Flash rust/early rust resistant. Fast dry. Early moisture resistant. Low odor. HAPS free. Water clean up. Low... [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Other; Iron, Galvanizing
- Chemistry: Acrylic; Alkyd; Resin
- Type: Enamel
- Cure / Setting Technology: Thermoset
from Rust-Oleum Corporation
Fast drying, multi-purpose, modified-alkyd enamel aerosol, indoor/outdoor [See More]
- Substrate: Steel; Metallic
- Chemistry: Alkyd; Resin
- Type: Base Coat; Enamel
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
12 oz Aerosol Can; Safety Blue; 12 min to Tack-free Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; Premium brand from Rustoleum; Multipurpose Paint [See More]
- Substrate: Steel; Aluminum; Metallic
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Rust-Oleum Corporation
12 oz, Aerosol Can; Gray Primer; Used with 1600 System Enamel Aerosol; Provides a solid base for adhesion of topcoat; Wet or dry Sandable; Use on wood, metal, masonry, etc.; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Wood
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Form: Aerosol
from Rust-Oleum Corporation
Low VOC, water based acrylic finish, indoor/outdoor use, gloss retention [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic
- Chemistry: Acrylic; Resin
- Type: Enamel
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
General purpose modified alkyd primer designed for interior or exterior use [See More]
- Substrate: Steel; Aluminum; Metallic
- Chemistry: Alkyd; Resin
- Type: Base Coat; Enamel
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Two component, polyester polyurethane, high gloss, two available activators [See More]
- Substrate: Steel; Metallic
- Chemistry: Polyurethane; Resin
- Type: Clear Coat
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
Two component, aliphatic acrylic polyurethane finish, high gloss enamel [See More]
- Substrate: Steel; Aluminum; Metallic
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Clear Coat; Enamel
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
Two component, polyamine converted epoxy, for potable water tanks [See More]
- Substrate: Steel; Concrete; Metallic
- Chemistry: Epoxy; Resin
- Type: Base Coat
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
Low VOC, fast dry, direct-to-metal, water based acrylic high gloss enamel [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic
- Chemistry: Acrylic; Resin
- Type: Enamel
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Low odor, two component, polyamine cured water based epoxy coating [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic
- Cure / Setting Technology: Multicomponent
- Chemistry: Epoxy; Resin
- Coverage: 500 to 600
from Rust-Oleum Corporation
Fast drying, low VOC, water-based acrylic copolymer, indoor/outdoor use [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic
- Chemistry: Acrylic; Resin
- Type: Enamel
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Rust-inhibitive two component, polyamide converted epoxy primers [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic
- Chemistry: Epoxy; Resin
- Type: Primer
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
Industrial food and beverage coating, prevents mold & mildew growth [See More]
- Substrate: Steel; Metallic
- Cure / Setting Technology: Film Drying
- Chemistry: Alkyd; Resin
- Coverage: 625 to 740
from Rust-Oleum Corporation
Multi-surface sandable primer, zero VOC, zero HAP, single component [See More]
- Substrate: Steel; Aluminum; Concrete; Metallic; Wood
- Chemistry: Acrylic; Resin
- Type: Primer
- Cure / Setting Technology: Film Drying