Resin Base / Polymer Binder Industrial Paints
from FORREST Technical Coatings
Stove Bright ® 1A62H241 Muffler Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone; Zinc
- Coverage: 139
- Cure / Setting Technology: Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Chemistry: Alkyd; Polyurethane; Resin
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Clear Coat
- Coverage: 250 to 593
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Chemistry: Epoxy; Resin
- Coverage: 400 to 882
- Cure / Setting Technology: Film Drying; Multicomponent
- Thickness: 0.0030 to 0.0070
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Film Drying
- Type: Clear Coat
- Form: Liquid; Aerosol
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Chemistry: Polyurethane; Resin; Polyester
- Cure Temperature: 400
- Cure / Setting Technology: Thermoset
- Form: Powder
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Primer
- Coverage: 250 to 609
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Chemistry: Epoxy; Resin
- Form: Liquid; Solvent
- Cure / Setting Technology: Film Drying; Multicomponent
- Dispensing Method: Sprayable; Brush / Roll-on
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Chemistry: Polyurethane; Resin
- Cure Temperature: 400
- Cure / Setting Technology: Thermoset
- Form: Powder
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Chemistry: Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Clear Coat
- Form: Liquid; Aerosol; Solvent
from FORREST Technical Coatings
We carry standard stock and RAL colors, but specialize in working with customers to create decorative and unique appearances for their specific needs. Our product catalog includes metallic, veins, textures and crinkle effects. We do expedient color matches and provide various other effects with... [See More]
- Chemistry: Epoxy; Resin
- Cure Temperature: 350 to 400
- Cure / Setting Technology: Thermoset
- Form: Powder
from FORREST Technical Coatings
FORREST Polyurethanes are designed to be long-lasting, highly-durable finishes with great color and gloss retention and excellent abrasion resistance. For use over multiple substrates in interior and exterior applications. 800 Series products comply with current environmental regulations in the... [See More]
- Chemistry: Alkyd; Polyurethane; Resin
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Clear Coat
- Form: Liquid; Solvent
from FORREST Technical Coatings
Stove Bright ® 1A62H290 Satin Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 62M290 Satin Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone
- Coverage: 125
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A62H059 Metallic Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 62M059 Metallic Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone
- Coverage: 125
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A52H494 Sky Blue is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A52H700 Forest Green is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A62H201 Charcoal is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 62M201 Charcoal is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for brush-on... [See More]
- Chemistry: Resin; Silicone
- Coverage: 125
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A62H830 Goldenfire Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 62M830 Goldenfire Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Chemistry: Resin; Silicone
- Coverage: 125
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A51H030 Silver is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A52H068 Gold is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid curing... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright ® 1A51H200 Flat Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Chemistry: Resin; Silicone
- Coverage: 11 to 13
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Chemistry: Resin; Silicone
- Coverage: 125 to 260
- Cure / Setting Technology: Thermoplastic; Film Drying
- Thickness: 0.0038 to 0.0085
from Adams Magnetic Products Co.
Our Latex Paint That Turns Walls into Magnetic Receptive Surfaces. MAGBond ® Magnetic Receptive Paint is a latex paint containing fine metal powder that can hold magnet sheets for a variety of applications – including the MAGBond ® Magnet Media System. Using MAGBond ® paint, and... [See More]
- Chemistry: Acrylic; Resin; Metal Filled
- Cure / Setting Technology: Film Drying
- Type: Base Coat
- Coverage: 80 to 100
from Sherwin-Williams
Exterior Products. Whether it ’s new construction or a recoat, a single plane or a commercial fleet, we have the quality products you need to make every application last. Interior Primers. Aerospace Coatings offered by Sherwin-Williams are available in a variety of Primer products specifically... [See More]
- Chemistry: Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Primer
- Form: Liquid
from Valspar Corporation (The)
GENERAL PURPOSE. Indoors or out, whatever the surface, choose the finest multi-purpose enamel paint available for a durable, flawless finish that is scratch- and water-resistant. PRIMER. Get your project off to the best start possible with job-specific formulations that cover a wide range of... [See More]
- Chemistry: Resin; Vinyl
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Lacquer Paint; Primer
- Form: Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers over 3,000 products by Chempax. If you are unable to locate a chemical you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Epoxy; Resin
- Type: Primer
from Sherwin-Williams Protective & Marine Coatings
4060 FasTop ™ Cove Base Resin. A broad range of solutions for virtually every Industrial Flooring and Wall system application [See More]
- Chemistry: Fluoropolymers; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat
- Form: Liquid; Solvent
from Rust-Oleum Corporation
Multi-purpose oil modified alkyd enamel, light abrasion resistance [See More]
- Chemistry: Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Enamel
- Coverage: 670 to 690
from IBT Industrial Solutions
Since 1949, IBT Industrial Solutions has been a major supplier to manufacturers, offering reliable products and services in the broad industrial marketplace. We are dedicated to fully meeting your demands for industrial tools and products of the highest quality from the brands you know and trust,... [See More]
- Chemistry: Epoxy; Polyurethane; Resin
- Form: Aerosol
from Dryvit UK
Acrylic coating for changing the colour of existing Dryvit finishes or use with Custom Brick. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for... [See More]
- Chemistry: Acrylic; Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Dispensing Method: Brush / Roll-on
from Aervoe Industries Incorporated
Used for touch-up & installation of anodized & painted building components [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Coverage: 17 to 34
- Cure / Setting Technology: Film Drying
- Cure Temperature: 55 to 80
from All-Spec Industries
The All-Spec CP100G-1 is a conductive formulation that has a water based coating manufactured with high quality acrylic latex and waterborne urethane. Produced to meet or exceed the ASTM-D-25780 specifications for conductivity and static decay rates. Use on floors, bench tops, tote boxes, etc. [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat
- Coverage: 300 to 400
from R. S. Hughes Company, Inc.
Dupli-Color paint comes in ford blue, has a high gloss finish and is packaged 6 per case. Uses acrylic enamel as the base. Can be used with metal. Designed to have chemical-resistant, heat-resistant properties. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Dampney Company, Inc.
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F. It is designed to selectively absorb wavelengths with the greatest heat content when used on the metal surfaces of collector panels having glazed covers. It collects... [See More]
- Chemistry: Resin; Silicone
- Coverage: 416
- Cure / Setting Technology: Thermoset (optional feature); Film Drying
- Cure Temperature: 77 to 400
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
DRY FALLOUT SPRAY EG-SHEL WHITE is a fast drying alkyd white paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. Eight foot dry fallout. 86% light reflectance. High hiding. Easy cleanup. Interior use. RECOMMENDED USAGE. For use over... [See More]
- Chemistry: Alkyd; Resin
- Thickness: 0.0060 to 0.0100
- Cure / Setting Technology: Film Drying
- Cure Temperature: 55 to 100
from Rust-Oleum Corporation
Anti-slip one-step pedestrian grade, single component anti-slip coating [See More]
- Chemistry: Epoxy; Resin
- Coverage: 50
- Cure / Setting Technology: Film Drying
- Thickness: 0.0300 to 0.0350
from Dryvit UK
An acrylic stain used in conjunction with Drytex Wood to give a natural wood effect appearance. [See More]
- Chemistry: Acrylic; Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Dupli-Color paint primer comes in gray and is packaged 6 per case. Uses acrylic enamel as the base. Can be used with fiberglass, metal, wood. Designed to have chemical-resistant, corrosion-resistant, rust-resistant properties. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Primer
- Functional Features: Corrosion Resistant
from Sherwin-Williams
Sherwin-Williams is a global manufacturing leader of automotive refinishing products. With a vast array of products to fit every need, Sherwin-Williams Automotive Finishes has you covered. [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Enamel; Primer
- Form: Liquid
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Hotline ® LATEX TRAFFIC PAINTS are very fast drying paints for use in marking parking lots, airports, and roads. TM2152 and TM2153 may be applied ambient airless or conventional, or may be heated for even faster dry. TM2152 and TM2153 conform to current VOC regulations and to the requirements... [See More]
- Chemistry: Acrylic; Resin
- Thickness: 0.0150
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
Two component, anti-slip, low VOC, bare-foot grade water based epoxy [See More]
- Chemistry: Epoxy; Resin
- Coverage: 80 to 100
- Cure / Setting Technology: Multicomponent
- Thickness: 0.0160 to 0.0200
from Dryvit UK
100% acrylic-based finish with multi-colored quartz aggregates. [See More]
- Chemistry: Acrylic; Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Dupli-Color Bright Beauty spray paint comes in black and has a matte finish. Uses acrylic lacquer as the base. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Lacquer Paint
- Dispensing Method: Sprayable
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
INDUSTRIAL ALUMINUM PAINT is an economical, one-package, interior / exterior, general purpose, leafing aluminum paint which produces a chrome-like uniform appearance and provides heat resistance up to 400 °F. Ultraviolet light resistant. Long term protection against weathering and moisture. Heat... [See More]
- Chemistry: Alkyd; Aluminum; Resin; Metal Filled
- Thickness: 0.0030 to 0.0040
- Cure / Setting Technology: Film Drying
- Cure Temperature: 50 to 100
from Rust-Oleum Corporation
Anti-slip floor coating, extra heavy vehicle grade, 100% solids, low odor [See More]
- Chemistry: Epoxy; Resin
- Coverage: 25 to 35
- Cure / Setting Technology: Multicomponent
- Thickness: 0.0270 to 0.0400
from Dryvit UK
A premixed, 100% acrylic-based finish designed to replicate the appearance of limestone blocks. [See More]
- Chemistry: Acrylic; Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Dupli-Color VHT Flameproof paint primer comes in gray and is packaged 6 per case. Uses silicone as the base. Can be used with metal. Designed to have heat-resistant properties. [See More]
- Chemistry: Resin; Silicone
- Form: Aerosol
- Type: Primer
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
MACROPOXY 646 MR is a high build, fast drying epoxy designed to protect steel and resist mildew in industrial exposures. It is ideal for maintenance painting and fabrication shop applications. The product ’s high build properties ensure adequate protection of sharp edges, corners, and welds. [See More]
- Chemistry: Epoxy; Resin
- Thickness: 0.0070 to 0.0135
- Cure / Setting Technology: Film Drying
- Cure Temperature: 35 to 100
from Rust-Oleum Corporation
Anti-slip floor coating, heavy vehicle grade, low VOC epoxy coating [See More]
- Chemistry: Epoxy; Resin
- Coverage: 40 to 60
- Cure / Setting Technology: Multicomponent
- Thickness: 0.0270 to 0.0400
from Dryvit UK
Architectural finish in the look of brick, stone, slate and tile for vertical surfaces. [See More]
- Chemistry: Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Dupli-Color VHT Flameproof paint comes in black (osha), has a gloss finish and is packaged 6 per case. Uses epoxy as the base. Can be used with metal. Designed to have chemical-resistant, corrosion-resistant, rust-resistant properties. [See More]
- Chemistry: Epoxy; Resin
- Functional Features: Corrosion Resistant
- Form: Aerosol
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
DRY FALL FLAT is a modified alkyd paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. High light reflectance, White. High hiding. Flash rust resistant. Eight foot dry fallout. Easy clean up. Interior use. RECOMMENDED USAGE. For use... [See More]
- Chemistry: Alkyd; Resin
- Thickness: 0.0080 to 0.0120
- Cure / Setting Technology: Film Drying
- Cure Temperature: 55 to 100
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Chemistry: Acrylic; Polyurethane; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Enamel
- Coverage: 580 to 610
from Dryvit UK
Exterior and interior quartz aggregate finish. [See More]
- Chemistry: Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Interior; Exterior; Wall
from R. S. Hughes Company, Inc.
Krylon paint comes in white, has a gloss finish and is packaged 6 per case. Uses epoxy as the base. [See More]
- Chemistry: Epoxy; Resin
- Form: Aerosol
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
ProMar ® ALKYD FAST DRY ZONE MARKING PAINT is a fast drying, medium oil alkyd in two colors, white and yellow, conforming to U.S. Bureau of Public Roads colors. Quick drying. High visibility colors. Ready to use. Durable. RECOMMENDED USAGE. For asphalt, concrete, brick, and other surfaced... [See More]
- Chemistry: Alkyd; Resin
- Thickness: 0.0150
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Chemistry: Resin; Silicone; Zinc; Metal Filled
- Cure / Setting Technology: Film Drying
- Type: Base Coat
- Coverage: 964
from Dryvit UK
Flexible, elastomeric exterior finish. [See More]
- Chemistry: Resin; Rubber
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Functional Features: Weather Resistant
from R. S. Hughes Company, Inc.
Krylon paint comes in clear, has a gloss finish and is packaged 6 per case. Uses acrylic enamel as the base. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Sherwin-Williams
Paint. A critical step for any painting project is choosing the right paint. Thanks to today's improved coatings and applicators, even first-time painters can achieve professional-quality results. Primers. Get the beautiful, long-lasting results you expect. Primers "anchor" finish coats, level... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
ProMar ° VOC Compliant Acrylic Copolymer Traffic Paint is a conventional dry (non-heat applied) acetone based paint. Acetone, as the main solvent, has Exempt Status under Federal law and does not contribute harmful VOC °s. ProMart ° VOC Compliant Acrylic Traffic Paint is 100% acrylic,... [See More]
- Chemistry: Acrylic; Resin; Acetone-Based
- Form: Liquid
- Thickness: 0.0150
- Dispensing Method: Sprayable
from Rust-Oleum Corporation
Modified silicone aluminum & colored finishes, high heat exposed surfaces [See More]
- Chemistry: Aluminum; Resin; Silicone; Metal Filled
- Cure / Setting Technology: Film Drying
- Type: Clear Coat (optional feature); Primer (optional feature)
- Coverage: 370 to 640
from Dryvit UK
Interior/exterior acrylic PMR coating in standard and custom colours. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. [See More]
- Chemistry: Acrylic; Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Dispensing Method: Brush / Roll-on
from R. S. Hughes Company, Inc.
Krylon paint comes in bright silver, has a metallic finish and is packaged 6 per case. Uses acrylic enamel as the base. Can be used with ceramic, glass, metal, plaster, wood. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Setfast ® ACRYLIC AISLE MARKING PAINT is a conventional dry, industrial grade, water based acrylic product available in white and lead free yellow. Designed for use on interior factories, warehouses, etc., where floor markings are necessary to designate boundaries of aisles, stalls, or storage... [See More]
- Chemistry: Acrylic; Resin
- Thickness: 0.0150
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
Fast drying, multi-purpose, modified-alkyd enamel aerosol, indoor/outdoor [See More]
- Chemistry: Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Enamel
- Coverage: 8 to 12
from Dryvit UK
A coating used over Dryvit finishes that gives a pearlescent (metallic) appearance. [See More]
- Chemistry: Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Krylon paint comes in bbq & stove aluminum, has a metallic finish and is packaged 6 per case. Uses acrylic enamel as the base. Can be used with metal. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Clear Coat; Enamel; Primer
- Form: Liquid; Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
SETFAST ® Acrylic Zone Marking Paint is a conventional dry (non-heat applied) solvent based paint. It offers the following outstanding properties: Fast dry and hardness development. Excellent dirt pick-up resistance. High durability on concrete and asphalt surfaces. RECOMMENDED USAGE. SETFAST... [See More]
- Chemistry: Acrylic; Resin
- Thickness: 0.0150
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
Low VOC, water based acrylic finish, indoor/outdoor use, gloss retention [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Coverage: 577 to 640
from Dryvit UK
Ready to use polymer modified cementitious renders, used to create a brick effect finish. [See More]
- Chemistry: Resin
- Form: Cement
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Krylon paint comes in universal gray, has a gloss finish and is packaged 6 per case. Uses acrylic enamel as the base. Designed to have chemical-resistant properties. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Setfast ® PREMIUM ALKYD ZONE MARKING PAINT is a conventional dry (non-heat applied) solvent based zone marking paint. Abrasion resistant. Fast dry. High visibility. Glass beads can be added for making reflective markings. RECOMMENDED USAGE. Setfast ® Premium Alkyd has been developed for... [See More]
- Chemistry: Alkyd; Resin
- Thickness: 0.0150
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
General purpose modified alkyd primer designed for interior or exterior use [See More]
- Chemistry: Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Base Coat; Enamel
- Coverage: 590 to 770
from Dryvit UK
Polymer modified cementitious render and acrylic stain used to create a wood effect finish. [See More]
- Chemistry: Resin
- Form: Cement
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Krylon paint comes in white, has a gloss finish and is packaged 6 per case. Uses epoxy as the base. Designed to have chemical-resistant, stain-resistant properties. [See More]
- Chemistry: Epoxy; Resin
- Form: Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Setfast ® LOW VOC ACRYLIC TRAFFIC MARKING PAINT is a conventional dry (non-heat applied) acetone based paint. Acetone, as the main solvent, has Exempt Status under Federal law and does not contribute harmful VOCs. This is 100% acrylic, which offers the following outstanding properties: Faster... [See More]
- Chemistry: Acrylic; Resin; Acetone-Based
- Thickness: 0.0150
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
Two component, polyester polyurethane, high gloss, two available activators [See More]
- Chemistry: Polyurethane; Resin
- Cure / Setting Technology: Multicomponent
- Type: Clear Coat
- Coverage: 560 to 930
from Dryvit UK
Silicone facade paint. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible with our texture finishes and... [See More]
- Chemistry: Resin; Silicone
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Dispensing Method: Brush / Roll-on
from R. S. Hughes Company, Inc.
Krylon paint comes in bisque and is packaged 6 per case. Uses epoxy as the base. [See More]
- Chemistry: Epoxy; Resin
- Form: Aerosol
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® ALUMINUM PAINT is a superior quality, one package, interior/exterior, general purpose aluminum paint formulated with 325-mesh leafing aluminum pigment, petroleum resin, and select oils producing a chrome-like uniform appearance. For service temperatures up to 400 °F. Resists... [See More]
- Chemistry: Alkyd; Aluminum; Resin; Petroleum Resin & Select Oils; Metal Filled
- Thickness: 0.0025 to 0.0035
- Cure / Setting Technology: Film Drying
- Cure Temperature: 50 to 100
from Rust-Oleum Corporation
Two component, aliphatic acrylic polyurethane finish, high gloss enamel [See More]
- Chemistry: Acrylic; Polyurethane; Resin
- Cure / Setting Technology: Multicomponent
- Type: Clear Coat; Enamel
- Coverage: 390 to 825
from Dryvit UK
Proprietary, silicone-based nanotechnology coating that promotes hydrophobicity enhancing reduced dirt pick up properties. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are... [See More]
- Chemistry: Resin; Silicone
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Dispensing Method: Brush / Roll-on
from R. S. Hughes Company, Inc.
Krylon paint comes in clear, has a gloss finish and is packaged 6 per case. Uses acrylic enamel as the base. Can be used with metal, plastic, wood. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® HEAVY DUTY RUST RESISTANT ALUMINUM PAINT is a superior quality, one package, interior/exterior aluminum paint formulated with 325 mesh leafing aluminum pigment to give excellent rust inhibition and heat resistance up to 400 °F. Excellent weathering characteristics. Maintains... [See More]
- Chemistry: Alkyd; Aluminum; Resin; Metal Filled
- Thickness: 0.0030 to 0.0040
- Cure / Setting Technology: Film Drying
- Cure Temperature: 50 to 100
from Rust-Oleum Corporation
Two component, polyamine converted epoxy, for potable water tanks [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent
- Type: Base Coat
- Coverage: 1200
from Dryvit UK
A tintable acrylic stain that can be applied to acrylic or elastomeric finishes, providing an 'old world' or 'antique' look. [See More]
- Chemistry: Acrylic; Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Krylon paint comes in clear, has a gloss finish and is packaged 6 per case. Uses alkyd enamel as the base. Designed to have corrosion-resistant, rust-resistant properties. [See More]
- Chemistry: Alkyd; Resin
- Form: Aerosol
- Type: Enamel
- Functional Features: Corrosion Resistant
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® HI-HEAT SILICONE ALKYD ALUMINUM PAINT is a heat cured, interior/exterior, ready mixed, silicone resin, modified with an alkyd and reinforced with 325-mesh extra fine aluminum flakes. For service temperatures between 500 °F - 1000 °F. Heat reflective. Resists... [See More]
- Chemistry: Alkyd; Aluminum; Resin; Silicone; 325-Mesh Extra Fine Aluminum Flakes; Metal Filled
- Thickness: 0.0030 to 0.0040
- Cure / Setting Technology: Thermoset; Film Drying
- Cure Temperature: 50 to 100
from Rust-Oleum Corporation
Low VOC, fast dry, direct-to-metal, water based acrylic high gloss enamel [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Coverage: 575 to 625
from Dryvit UK
A trowel-applied stone finish that simulates cut stone and granite. [See More]
- Chemistry: Resin
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior; Wall
from R. S. Hughes Company, Inc.
Krylon Commercial Coatings paint comes in white, has a gloss finish and is packaged 128 oz per inner, 4 packs per case. Uses alkyd enamel as the base. Can be used with concrete, steel, wood. Designed to have chemical-resistant, moisture-resistant properties. [See More]
- Chemistry: Alkyd; Resin
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
Silver-Brite ® HI-HEAT RESISTING ALUMINUM PAINT is a ready-to-use high heat resisting paint for interior exposures providing heat resistance up to 700 °F. Heat reflective. Maintains "Sheen". Resists discoloration. RECOMMENDED USAGE. For use over prepared steel surfaces in normal and high... [See More]
- Chemistry: Alkyd; Aluminum; Resin; Metal Filled
- Thickness: 0.0020 to 0.0025
- Cure / Setting Technology: Film Drying
- Cure Temperature: 50 to 100
from Rust-Oleum Corporation
Low odor, two component, polyamine cured water based epoxy coating [See More]
- Chemistry: Epoxy; Resin
- Coverage: 500 to 600
- Cure / Setting Technology: Multicomponent
- Thickness: 0.0040 to 0.0065
from Dryvit UK
Flexible, waterproof elastomeric exterior coating. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible... [See More]
- Chemistry: Resin; Rubber
- Form: Liquid
- Cure / Setting Technology: Film Drying
- Dispensing Method: Brush / Roll-on
from R. S. Hughes Company, Inc.
Krylon Commercial Coatings K2204 paint primer comes in white and is packaged 4 per case. Uses acrylic enamel as the base. Can be used with wood. [See More]
- Chemistry: Acrylic; Resin
- Type: Enamel; Primer
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
SUPER Save-Lite ® DRY FALL is a modified alkyd, intense white paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. High hiding. High light reflectance - 83%. Eight foot dry fallout. Suitable for use in USDA inspected facilities. [See More]
- Chemistry: Alkyd; Resin
- Thickness: 0.0060 to 0.0065
- Cure / Setting Technology: Film Drying
- Cure Temperature: 77
from Rust-Oleum Corporation
Fast drying, low VOC, water-based acrylic copolymer, indoor/outdoor use [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Enamel
- Coverage: 530 to 610
from R. S. Hughes Company, Inc.
Krylon Commercial Coatings K2204 paint primer comes in white and is packaged 4 per case. Uses alkyd enamel as the base. Can be used with plaster. Designed to have stain-resistant properties. [See More]
- Chemistry: Alkyd; Resin
- Type: Enamel; Primer
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
WATERBASED INDUSTRIAL ENAMEL is a proprietary technology, one-component, acrylic-modified alkyd with outstanding exterior performance properties. Outstanding exterior durability. High Gloss. Flash rust/early rust resistant. Fast dry. Early moisture resistant. Low odor. HAPS free. Water clean up. Low... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Cure / Setting Technology: Thermoset
- Type: Enamel
- Thickness: 0.0045 to 0.0085
from Rust-Oleum Corporation
Rust-inhibitive two component, polyamide converted epoxy primers [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent
- Type: Primer
- Coverage: 1091
from R. S. Hughes Company, Inc.
Krylon Industrial paint comes in fluorescent red/orange, has a gloss finish and is packaged 12 per case. Uses alkyd enamel as the base. Designed to have heat-resistant properties. [See More]
- Chemistry: Alkyd; Resin
- Form: Aerosol
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Rust-Oleum Corporation
Industrial food and beverage coating, prevents mold & mildew growth [See More]
- Chemistry: Alkyd; Resin
- Coverage: 625 to 740
- Cure / Setting Technology: Film Drying
- Thickness: 0.0020 to 0.0050
from R. S. Hughes Company, Inc.
Krylon Industrial 5-Ball paint comes in clear, has a gloss finish and is packaged 6 per case. Uses acrylic enamel as the base. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Rust-Oleum Corporation
Multi-surface sandable primer, zero VOC, zero HAP, single component [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Primer
- Coverage: 640
from R. S. Hughes Company, Inc.
Krylon Industrial 5-Ball paint comes in white, has a gloss finish and is packaged 6 per case. Uses acrylic enamel as the base. Can be used with metal, wood. Designed to have chemical-resistant properties. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, two component [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent
- Type: Base Coat; Enamel
- Coverage: 720
from R. S. Hughes Company, Inc.
Krylon Industrial 5-Ball paint primer comes in platinum and is packaged 12 oz per inner, 6 per case. Uses acrylic enamel as the base. Can be used with metal, wood. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Primer
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, two component [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent
- Type: Base Coat; Enamel
- Coverage: 835
from R. S. Hughes Company, Inc.
Krylon Industrial Coatings paint comes in clear, has a semi-gloss finish and is packaged 128 oz per inner, 4 packs per case. Uses silicone as the base. [See More]
- Chemistry: Resin; Silicone
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, two component [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent
- Type: Primer
- Coverage: 690
from R. S. Hughes Company, Inc.
Krylon Industrial Coatings 100 paint comes in black, has a gloss finish and is packaged 128 oz per inner, 1 pack per case. Uses alkyd enamel as the base. Can be used with aluminum, concrete, iron, masonry, steel, wood. [See More]
- Chemistry: Alkyd; Resin
- Type: Enamel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from Rust-Oleum Corporation
Fast drying, modified short-oil alkyd, used for vehicle refinishing & OEM's [See More]
- Chemistry: Alkyd; Resin
- Cure / Setting Technology: Film Drying
- Type: Clear Coat; Enamel
- Coverage: 513 to 610
from R. S. Hughes Company, Inc.
Krylon Industrial Coatings paint comes in aluminum, has a metallic finish and is packaged 128 oz per inner, 4 packs per case. Uses silicone as the base. Can be used with metal. [See More]
- Chemistry: Resin; Silicone
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
from R. S. Hughes Company, Inc.
Krylon Industrial Coatings 42 paint comes in black, has a gloss finish and is packaged 128 oz per inner, 4 packs per case. Uses alkyd enamel as the base. [See More]
- Chemistry: Alkyd; Resin
- Type: Enamel