Adjusting Screw Machining Clamps
from Imao-Fixtureworks
Compact in size and completely modular, this versatile clamping system allows easy height adjustment by coupling the modules. The modular 5-axis clamping system is designed to eliminate tool interference as the workpiece is machined. The pins or screws can be attached to the underside of a plate or... [See More]
- Features: AdjustingScrew
- Application: ToolMounting
- Clamp type: Pull Clamp
- Actuation: Manual
from Imao-Fixtureworks
Strong clamping by the spring. The holding force limits the gap between plates within 0.1 mm. [See More]
- Features: AdjustingScrew
- Application: HeavyDuty
- Clamp type: Shaft Coupling Clamp
- Load Limit: 89.92
from Imao-Fixtureworks
One-Touch Indexing Clamps are quick fasteners with precise locating for position adjustment by sliding or rotation. Tapered surface contact provides +/- 0.05 repeatability and ON/OFF marking and click eliminate human error. [See More]
- Features: AdjustingScrew
- Application: Light Duty (Office or Drafting)
- Clamp type: Quick Fastening
- Load Limit: 31.47 to 38.22
from Imao-Fixtureworks
One-Touch Indexing Clamps are quick fasteners with precise locating for position adjustment by sliding or rotation. Tapered surface contact provides +/- 0.05 repeatability and ON/OFF marking and click eliminate human error. [See More]
- Features: AdjustingScrew
- Application: Light Duty (Office or Drafting)
- Clamp type: Quick Fastening
- Load Limit: 31.47 to 38.22
from Te-Co, Inc.
Product Information. Incredible clamping and hold down power. Low profile, compact design. High quality stainless steel construction. Easy to install. Smooth or serrated. Available in five sizes. *A is body diameter. **Smooth jaw only will have relief cut [See More]
- Features: AdjustingScrew
- Actuation: Manual
- Clamp type: Dyna-Force Clamp
- Material: Stainless Steel
from Carr Lane Manufacturing Co.
Pivoting-nose edge clamp operated by a cam handle for fast action. Nose pivots to exert clamping force forward and downward at the same time. Smooth spiral cam locks positively anywhere within its 180 ° throw. [See More]
- Features: AdjustingScrew; Locking feature to fix gage opening
- Application: Metalworking
- Clamp type: Cam Clamps; Side / Edge Clamp
- Clamping Width: 1.25 to 1.75
from DME Company
• Low Cost. • Nice Finish. • Machined Accuracy. • Versatile Fit & Design [See More]
- Features: AdjustingScrew
- Clamp Straps: Clamp Strap Assembly
- Clamp type: Mold Clamp
- Strap Type: Forked / "U" Clamp (optional feature); Plain / Taper Nose Clamp (optional feature); Open and Closed Toe Clamps
from Te-Co, Inc.
Product Information. Allows for Flexible Hole Placement. Includes 1/4-20 Threaded Knurled Knob Stud to Lock in Place. Components Can Be Purchased With or Without the Purchase of a Plate. Other Components to Use With Adjustable Positioners. Standoffs. Pin Rest Pads. Magnetic Pest Pads. Magnetic Pin... [See More]
- Features: AdjustingScrew
- Application: Metalworking
- Clamp type: Large Adjustable Positioner
- Actuation: Manual
from Carr Lane Manufacturing Co.
Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping with the easy turn of a hex wrench. These compact clamps are ideal for... [See More]
- Features: AdjustingScrew
- Application: Metalworking
- Clamp type: Side / Edge Clamp
- Clamping Width: 1 to 2.5
from DME Company
For use on injection molds where it is preferred to slip clamps off their platen bolts during mold changes. Fully adjustable, these clamps are suitable for use on any mold having height or flange height between 15 ⁄32" and 2". Forged of hi-tensile steel, hardened and black oxide finished,... [See More]
- Features: AdjustingScrew
- Clamp Straps: Clamp Strap Assembly
- Clamp type: Mold Clamp
- Strap Type: Forged Clamp
from Carr Lane Manufacturing Co.
The new V-jaw version of our popular Tiny Vise is ideal for clamping round workpieces. The V jaw can also be used to clamp a rectangular workpiece from two directions with a single clamp at its corner. Double edge clamps allow clamping two workpieces at the same time with equal force. These mini... [See More]
- Features: AdjustingScrew
- Application: Metalworking
- Clamp type: Side / Edge Clamp
- Clamping Width: 1.25 to 2.5
from DME Company
TopsAll ® Extra Heavy Duty Line [See More]
- Features: AdjustingScrew
- Clamp Straps: Clamp Strap Assembly
- Clamp type: Mold Clamp
- Strap Type: Forked / "U" Clamp (optional feature); Plain / Taper Nose Clamp (optional feature); Open and Closed Toe Clamps
from Carr Lane Manufacturing Co.
An important new clamping development! These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Each... [See More]
- Features: AdjustingScrew
- Application: Metalworking
- Clamp type: Side / Edge Clamp
- Clamping Width: 0.5625 to 2.5
from DME Company
A fast-adjusting, easy-to-handle design that reduces your set-up time. Each clamp built to strict standards of premium quality steel, hardened for long lasting life, with black penetrate finish to prevent rust. Can be purchased as complete assemblies or in individual parts. [See More]
- Features: AdjustingScrew
- Clamp Straps: Clamp Strap Assembly
- Clamp type: Toe Clamp; Mold Clamp
- Strap Type: Forked / "U" Clamp (optional feature); Plain / Taper Nose Clamp (optional feature); Open and Closed Toe Clamps