Aluminum Machining Clamps
from Jergens, Inc.
Jergens Expanding Micro ™ Clamps allow you to fixture more parts on your fixture plates. The unique expanding design can hold two parts at once when used with a positive stop. Features, Benefits, & Product Specifications: Material: Aluminum Housing, Steel Wedge. Minimizes tool changes. [See More]
- Material: Aluminum; Aluminum Housing, Steel Wedge
- Clamping Mechanism: Screw; Wedge
- Load Limit: 500
from Festo Corporation
For in-house assembly of clamping units. Not certified for use in safety-related control systems [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Features. Plate that allows or preventing the spindle from turning due to vibrations from the machine. Suitable for positively locking the spindle for a long period of hours. For details of the adjustable handle (FKF type). [See More]
- Material: Aluminum
- Clamping Mechanism: Lever
from Jergens, Inc.
With one of the largest selections available, Jergens Workholding Components have everything you need to design and build fixtures, jigs, and other workholding devices. Features, Benefits, & Product Specifications: Material: Available in Low Carbon Steel and 2024 Aluminum [See More]
- Material: Aluminum; Steel; Available in Low Carbon Steel and 2024 Aluminum
- Strap Type: Plain / Taper Nose Clamp
- Clamp Straps: Strap Only
from Festo Corporation
For in-house assembly of clamping units. Not certified for use in safety-related control systems [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Features. Plate that allows or preventing the spindle from turning due to vibrations from the machine. Suitable for positively locking the spindle for a long period of hours. For details of the adjustable handle (FKF type). [See More]
- Material: Aluminum; Die-cast Zinc (ZDC1)
- Clamping Mechanism: Lever
from Festo Corporation
Compact rodless cylinder with diaphragm. Single-acting, with reset function. Flat design. Hermetically sealed. Pressure plates and foot mounting as accessories [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Pneumatic Shaft-Locking Clamps are automated quick locks with air for machine changeover. Perfect for secure clamping of sliding shaft and spindle after position adjustment of parts and units in the machinery. Features: Spring clamping and pneumatic unclamping mechanism prevents the decrease of... [See More]
- Material: Aluminum; Stainless Steel
- Load Limit: 22.48 to 31.47
- Application: ToolMounting
- Actuation: Pneumatic
from Festo Corporation
Compact rodless cylinder with diaphragm. Single-acting, with reset function. Flat design. Hermetically sealed. Pressure plates and foot mounting as accessories [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Features. Plate that allows or preventing the spindle from turning due to vibrations from the machine. Suitable for positively locking the spindle for a long period of hours. For details of the adjustable handle (FKF type). [See More]
- Material: Aluminum; Steel
- Capacity / Jaw Opening: 1.28 to 2.11
- Clamp type: Hook / Swing Clamp
- Load Limit: 78.68 to 124
from Festo Corporation
Compact rodless cylinder with diaphragm. Single-acting, with reset function. Flat design. Hermetically sealed. Pressure plates and foot mounting as accessories [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Feature. ・Collet-shaped jaws generate high clamping force. ・The machinable jaw can clamp any shape of. workpieces and hold long workpieces with a wide. clamping area by machining completely through. Note: Do not tighten the cap without the workpiece to prevent damage and deformation. [See More]
- Material: Aluminum; Steel
- Load Limit: 3.89 to 4
- Clamp type: Concentric
- Actuation: Manual
from Festo Corporation
Clamping unit DADL-EL: for quarter turn actuator DRRD, for mechanical locking in the end positions to prevent unwanted movement in unpressurized condition. Clamping component DADL-EC: for quarter turn actuator DRRD, for securing an intermediate position in combination with the clamping unit DADL-EL. [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Pneumatic Shaft-Locking Clamps are automated quick locks with air for machine changeover. Perfect for secure clamping of sliding shaft and spindle after position adjustment of parts and units in the machinery. Features: Spring clamping and pneumatic unclamping mechanism prevents the decrease of... [See More]
- Material: Aluminum
- Load Limit: 180 to 360
- Application: HeavyDuty; ToolMounting
- Actuation: Pneumatic
from Festo Corporation
KPE: ready-to-install combination of clamping cartridge KP and housing. KEC: for use as a holding device (static application). KEC-S: for safety-related applications [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Compact OD clamp with machinable jaw. Perfect for clamping small / irregular-shaped workpiece. This unique clamp eliminates the need for complicated fixture and provides simple workholding. Clamping force: 2500 to 5500N. Allowable screw torque: 7.5 to 46 Nm. Locating repeatability: +/-0.08. [See More]
- Material: Aluminum; Steel
- Clamping Width: 1.26 to 1.97
- Capacity / Jaw Opening: 0.2913
- Load Limit: 562 to 1236
from Festo Corporation
KPE: ready-to-install combination of clamping cartridge KP and housing. KEC: for use as a holding device (static application). KEC-S: for safety-related applications [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
OD clamp with machinable jaw. Perfect for clamping irregular-shaped workpiece!. Can be used on VMC, HMC and lathe. This unique clamp eliminates the need for complicated fixture and provides simple workholding. Interchangeable jaw allow economical workholding. 0.15mm clamping stroke of each jaw... [See More]
- Material: Aluminum; Steel
- Clamping Width: 2.56 to 3.54
- Capacity / Jaw Opening: 0.7480 to 0.9055
- Load Limit: 899 to 1349
from Festo Corporation
KPE: ready-to-install combination of clamping cartridge KP and housing. KEC: for use as a holding device (static application). KEC-S: for safety-related applications [See More]
- Material: Aluminum
- Clamp type: Cylinder Clamp
from Imao-Fixtureworks
Features. Plate that allows or preventing the spindle from turning due to vibrations from the machine. Suitable for positively locking the spindle for a long period of hours. For details of the adjustable handle (FKF type). [See More]
- Material: Aluminum; Steel
- Actuation: Pneumatic
- Load Limit: 899 to 1349
- Features: Locking feature to fix gage opening
from Imao-Fixtureworks
Feature. Precision Thrust Clamps can clamp at the same position by precise projection of clamping bars. Spring-loaded clamp provides constant clamping force. The handle clicks to indicate completed clamping. [See More]
- Material: Aluminum; Plastic; Steel
- Clamping Width: 0.3937
- Capacity / Jaw Opening: 0.1969
- Load Limit: 12364 to 39340
from Te-Co, Inc.
Product Information. 1/4-20 Threaded Components. Made of Aluminum. Ideal for Light Pressure Clamping. Actuates with the Press of a Finger. Components Can Be Purchased With or Without Purchase of a Plate. Clamping Solution for CMM Part Fixturing. When fixturing parts to be inspected by a touch... [See More]
- Material: Aluminum
- Clamp Straps: Clamp Strap Assembly
- Clamp type: Large Soft Touch Clamp
- Application: Metalworking
from Carr Lane Manufacturing Co.
Simple, economical aluminum clamp for medium-force clamping. Provides instant height adjustment without blocks or shims. Soft aluminum material protects both the workpiece and the machine table from damage. Turn clamp 90 ° in either direction for loading clearance. [See More]
- Material: Aluminum
- Strap Type: Adjustable
- Clamp Straps: Clamp Strap Assembly (optional feature); Strap Only
- Application: Metalworking
from Vektek, LLC
Standard Features. Arms swing 90 °. Our capscrew arm design is available. You may modify our arm, or we have provided you with dimensions to make your own. Special wipers and swept-line cylinder tops help keep chips from packing and coolant contaminants from entering the operation. Swing clamp... [See More]
- Material: Aluminum
- Application: Metalworking; Machine Shop; ToolMounting
- Clamp type: Hook / Swing Clamp
- Load Limit: 65 to 250
from Te-Co, Inc.
Product Information. Hold round and unusual shaped parts with ease. Compact method allows more parts per load at a lower price than vise soft jaw. Available with extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece. Specially designed steel wedge... [See More]
- Material: Aluminum
- Clamp type: Uniforce Clamp
from Carr Lane Manufacturing Co.
Soft-metal Tapped-Heel Clamp Strap made of high-strength aluminum alloy, available with a plain nose or locator nose. These clamp straps have a tapped heel that accepts an adjustable rear support, such as a Stud leveling Foot. Available to fit 1/2-13 and 5/8-11 stud sizes. Made in USA. [See More]
- Material: Aluminum
- Strap Type: Tapped / Tapped-heel Clamp; Plain / Taper Nose Clamp
- Clamp Straps: Clamp Strap Assembly (optional feature); Strap Only
- Application: Metalworking
from Vektek, LLC
Standard Features. Arms swing 90 °. Our capscrew arm design is available. You may modify our arm, or we have provided you with dimensions to make your own. Special wipers and swept-line cylinder tops help keep chips from packing and coolant contaminants from entering the operation. Swing clamp... [See More]
- Material: Aluminum
- Application: Metalworking; Machine Shop; ToolMounting
- Clamp type: Hook / Swing Clamp
- Load Limit: 60 to 250