Metal Acrylic Adhesives and Acrylate Adhesives
from Hernon Manufacturing, Inc.
Fusionbond ® 375 is a highly thixotropic, two component, room temperature curing, 1:1 ratio, methacrylate adhesive system. Fusionbond ® 375 is formulated to provide fixturing strength within 7 to 10 minutes. This adhesive product forms resilient bonds and maintains its strength over a wide... [See More]
- Substrate Compatibility: Metal; Plastic; PVC, acrylic, ABS, stainless steel, and some types of fiberglass
- Type / Form: 50 ml (two component)
- Cure / Technology: Two Component
- Features: Adhesive
from Ellsworth Adhesives
3M Scotch-Weld DP805 Off-White is a two component, room temperature curing, acrylic structural adhesive. It offers good durability and impact, as well as excellent peel and shear strengths. Ideal for bonding ceramics, wood, metals, and most plastics. 48.5 mL Duo-Pak Cartridge. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 40000 to 150000
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 Tan is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, little surface preparation, impact resistance, high shear and peel strength. 1:1 mix ratio by volume and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 18000 to 22000
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, little surface preparation, impact resistance, high shear and peel strength. 1:1 mix ratio by volume and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 18000 to 22000
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 NS is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, non-sag, little surface preparation, 10 minute handling time, high shear and peel strength. 1:1 mix ratio... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 90000 to 100000
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 NS is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, non-sag, little surface preparation, 10 minute handling time, high shear and peel strength. 1:1 mix ratio... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 90000 to 100000
from Ellsworth Adhesives
3M Scotch-Weld DP820 Acrylic Adhesive Off-White is a two component toughened acrylic structural adhesive. It bonds well to many metals, ceramics, wood, and most plastics. 48.5 mL Cartridge. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 45000 to 75000
from Ellsworth Adhesives
3M Scotch-Weld DP8405NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from Ellsworth Adhesives
3M Scotch-Weld DP8405NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from Ellsworth Adhesives
3M Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray is an extra strength, two-part acrylic adhesive that provides outstanding peel, remarkable shear, and robust impact performance. This acrylic adhesive excels in providing adhesion to a wide array of different plastics and metals, even those... [See More]
- Substrate Compatibility: Metal; Plastic
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 15000 to 50000
from Ellsworth Adhesives
3M Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray is a robust two-part acrylic adhesive that brings strong impact performance, excellent peel, and stellar shear. Offered in a 490mL cartridge, this acrylic adhesive exceeds in bringing adhesion to a several different types of metals and... [See More]
- Substrate Compatibility: Metal; Plastic
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 15000 to 50000
from Ellsworth Adhesives
3M Scotch-Weld DP8410NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from Ellsworth Adhesives
3M Scotch-Weld DP8410NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from Ellsworth Adhesives
Ashland PLIOGRIP Structural Acrylic Adhesive 1010C Gray is a two component adhesive that is used to bond plastics, aluminum, gel coats, ABS, polycarbonate, steel, and other metals. It cures at room temperature and is resistant to temperature, gasoline, and salt water. 10:1 Ratio by volume. 490 mL... [See More]
- Substrate Compatibility: Composites; Metal; Plastic
- Features: Adhesive
- Cure / Technology: Two Component
- Industry: Marine
from Ellsworth Adhesives
DYMAX 846-GEL Structural Adhesive Light Yelllow is a one component, heat curing urethane that is used for bonding metals, plastics, ceramics, glass, epoxy board, and filled nylon. It offers low volatility, high strength, low toxicity, and resistance to thermal shock. 1 L Bottle. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Features: Adhesive
- Cure / Technology: Two Component (optional feature); Single Component (optional feature)
- Tensile (Break): 2800
from Shenzhen DeepMaterial Technologies Co., Ltd
It is a two-component acrylic structural adhesive. At room temperature (23°C), the operating time is 3-5 minutes, the curing time is 5 minutes, and it can be used in 1 hour. After being fully cured, it has the characteristics of high shear, high peeling, and good impact resistance. Suitable for... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Rubber or Elastomer; Wood
- Features: Adhesive
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
- Viscosity: 70000 to 150000
from Hi-Tech Seals, Inc.
Assembly of cylindrical parts, such as rotors, gears, bushings, collars and bearings, can be effectively and reliably accomplished with HERNON ® ’s line of Cylinlock ® Retaining Compounds. Cylinlock ® high strength products eliminate the need for mechanical methods of assembly... [See More]
- Substrate Compatibility: Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Sealant; Adhesive
from Chemence Inc.
KG155 flexible anaerobic gasket is a purple, gel. It is easily applied and cures to form a tough, flexible, formed-in-place gasket. KG155 provides an instant low pressure seal for most general purpose gasket sealing applications. KG155 is used for fuel and water pumps, split crank cases on engines,... [See More]
- Substrate Compatibility: Metal
- Type / Form: Gel
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Features: Sealant; Adhesive
from Cattie Adhesive Solutions
Pressure Sensitive Hot Melts (PSA) are unique because they do not solidify to form a solid material, they remain permanently tacky and have the ability to wet-out substrates on contact. Bonds are formed by bringing the PSA adhesive in contact with the substrate and applying pressure. When inadequate... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Rubber or Elastomer; Textiles or Fabrics; Wood
- Type / Form: Mini Pillows
- Cure / Technology: Thermoplastic / Hot Melt; Contact or Pressure Sensitive Adhesives
- Features: Solvent Based; Water Based ; Adhesive
from ND Industries, Inc.
Cyanoacrylates (also known as superglues) are single-part clear instant adhesives that rapidly polymerize at room temperature and develop strength extremely fast (fixture 0 to 60 seconds). They are initiated by moisture on the parts surface or by accelerators. Uses: Circuit board wires. Ceramic,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Textiles or Fabrics
- Type / Form: Liquid
- Cure / Technology: Air Setting / Film Drying; Single Component
- Features: Adhesive
from Henkel Corporation - Industrial
Thixotropic acrylic methacrylate ester liquid adhesive designed for the bonding of cylindrical fitting parts. LOCTITE ® 6001 is a rose beige to off-white thixotropic acrylic methacrylate ester liquid adhesive designed for the bonding of cylindrical fitting parts. It cures when confined between... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Leveling Filling; Adhesive
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Features: Sealant; Threadlocker or Retainer; Adhesive
from ND Industries, Inc.
Vibra-Tite acrylic (methacrylate) adhesives are a room temperature curing, non-sagging, 2-part system comprised of resin and activator. Our adhesives respond well to dissimilar materials and a wide range of temperatures. Forms a bond on: fiberglass, steel, aluminum, stainless steel, composite, ABS,... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Wood
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Adhesive
from Henkel Corporation - Industrial
2-part, high strength, fast-fixturing acrylic methacrylate adhesive gel system designed for bonding low energy plastics without surface pretreatment. LOCTITE ® AA 3035 is a pale yellow, 2-part, high strength, fast-fixturing acrylic methacrylate adhesive gel system designed for bonding low... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Gel
- Cure / Technology: Two Component
- Features: Adhesive
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of structural acrylic adhesives. These systems are two-part, no mix, and reactive adhesives. Each acrylic adhesive has two components: the adhesive base or resin, and the Activator. Structural acrylic adhesives are termed “reactive ” cure systems. The... [See More]
- Substrate Compatibility: Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Features: Sealant; Adhesive
from ND Industries, Inc.
Vibra-Tite is one of the world ’s market leaders in anaerobics, cyanoacrylates, epoxies and ultraviolet technologies. Vibra-Tite is quickly becoming one of the most highly respected names in the adhesive industry. And, as a result of ND ’s low overhead expenses and in-house... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Wood
- Type / Form: Liquid
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Features: Adhesive
from Henkel Corporation - Industrial
Modified acrylic ester adhesive liquid typical applications include bonding dissimilar materials such as metals, glass or ceramics. LOCTITE ® AA 312 is a clear, amber, modified acrylic ester adhesive liquid typical applications include bonding dissimilar materials such as metals, glass or... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Adhesive
from Hi-Tech Seals, Inc.
Self Locker thread locking adhesives are pre-applied products designed for production environments. This line features microscopic glass spheres that remain dry until activated by thread engagement. The shearing action of the engagement breaks the spheres releasing the contained anaerobic thread... [See More]
- Substrate Compatibility: Metal
- Industry: Automotive; OEM or Industrial
- Features: Threadlocker or Retainer; Adhesive
- Use Temperature: -65 to 300
from ND Industries, Inc.
Vibra-Tite Structural adhesives are a methacrylate technology, room temperature curing, two part, no mix system comprised of resin and hardener. Structural adhesives work on metal, composites, plastic, wood, ceramic and many other substrates. Since it is a two part system, structurals are ideal for... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Wood
- Type / Form: Liquid
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Features: Adhesive
from Henkel Corporation - Industrial
2-part, methacrylate acrylic structural adhesive paste system that forms resilient bonds and maintains its strength over a wide range of temperatures. LOCTITE ® AA H4000 is a pale yellow, 2-part, non-sag, medium fixture time, methacrylate acrylic structural adhesive paste system that forms... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 130000
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Features: Sealant; Adhesive
from Henkel Corporation - Industrial
2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. LOCTITE ® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Features: Adhesive
- Cure / Technology: Two Component
- Viscosity: 190000
from Henkel Corporation - Industrial
UV, liquid acrylic adhesive for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance. LOCTITE ® AA 3933 is a transparent to slightly hazy, UV acrylic, instant, liquid adhesive suitable for a wide variety of applications requiring fast cure,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Features: Adhesive
from Henkel Corporation - Industrial
Fluorescent, UV acrylic light cure adhesive liquid primarily designed for bonding plastic substrates where a flexible, tough bond is required. LOCTITE ® AA 3944 is a transparent to hazy, fluorescent, UV acrylic light cure adhesive liquid primarily designed for bonding plastic substrates where a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Features: Adhesive