Event Triggered Moisture Meters
from The Kahn Companies
The Kahn Cermet II Hygrometer consists of a digital display with integral signal conditioning board, ceramic dewpoint sensor and an interconnecting cable. The sensor can be installed directly in the gas line or in a separate sampling gas stream by utilizing the optional sensor block. The display can... [See More]
- Features: Event Triggered
- Form Factor: Meter; Instrument
- Variables Measured: Absolute Humidity; Moisture Content; DewPoint
- Dew Point Range: -148 to 68
from OMEGA Engineering, Inc.
The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components, and turns on a heater (or alternatively, a fan) at either set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the... [See More]
- Features: Event Triggered
- Form Factor: Instrument
- Variables Measured: Relative Humidity; Temperature
- Operating Temp: 32 to 140
from OMEGA Engineering, Inc.
The MFR012 is designed to control the relative air humidity inside of enclosures. When connected to an enclosure heater, (de-humidifier), it will turn the heater on at the set humidity level in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by... [See More]
- Features: Event Triggered
- Form Factor: Instrument
- Variables Measured: Relative Humidity; DewPoint; Temperature
- Relative Humidity Range: 35 to 95
from OMEGA Engineering, Inc.
The OM-THA2 is a multi-function unit that monitors temperature, relative humidity and dew point, provides for out-of-range conditions and continuously logs data. It consists of a base unit with an easy to read display and a 4.6 m (15') remote sensor probe. The alarm function monitors temperature,... [See More]
- Features: Event Triggered; Datalogger; Battery Powered
- Form Factor: Sensor; Meter
- Variables Measured: Relative Humidity; DewPoint; Temperature
- Relative Humidity Range: 0.0 to 95