SSOP LED Drivers
from Infineon Technologies AG
LITIX ™ Basic TLD1124EL is a one channel high side driver IC with integrated output stages. The TLD1124EL is designed to control LEDs with a current up to 360 mA. In typical automotive applications the device is capable to drive i.e. 3 red LEDs with a current up to 180 mA, which is limited by... [See More]
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 1
- Output Current: 180
- Package Type: PG-SSOP-14
from RS Components, Ltd.
Texas Instruments TLC5920DL [See More]
- Form Factor: Intgrated Circuit (IC)
- Features: RoHS Compliant
- Package Type: Ssop
from DigiKey
LED Driver IC 16 Output Linear Shift Register No Dimming 25.2mA 24-SSOP [See More]
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 5
- Input Voltage: 3 to 5.5
- Output Current: 25.2
from DigiKey
LED Driver IC 16 Output Linear Shift Register Dimming 35mA 24-SSOP [See More]
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 17
- Input Voltage: 3 to 5.5
- Output Current: 35
from DigiKey
LED Driver IC 12 Output Linear Dimming 20mA 20-SSOP-B [See More]
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 35
- Input Voltage: 4.5 to 5.5
- Output Current: 20
from DigiKey
LED Driver IC 8 Output DC DC Controller Step-Up (Boost) Analog, PWM Dimming 40-SSOP-B [See More]
- Form Factor: Intgrated Circuit (IC)
- Features: RoHS Compliant
- Input Voltage: 9 to 35
from DigiKey
LED Driver IC 1 Output AC DC Offline Switcher Flyback, Forward, SEPIC, Step-Up (Boost) Analog, PWM Dimming 24-QSOP [See More]
- Form Factor: Intgrated Circuit (IC)
- Features: RoHS Compliant
- Input Voltage: 9 to 20
from DigiKey
LED Driver IC 17 Output Linear Dimming 50mA 24-QSOP [See More]
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 7
- Input Voltage: 2 to 3.6
- Output Current: 50
from Microchip Technology, Inc.
The AT9917 is an advanced fixed frequency PWM IC designed to control single-switch, boost, SEPIC, and buck LED drivers in a constant current mode. The controller uses a peak current-mode control scheme (with programmable slope compensation) and includes an internal transconductance amplifier to... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5.3 to 40
- Type: Dimmable
- Package Type: TSSOP-24
from ROHM Semiconductor GmbH
The BD8389FV-M is a serial-in parallel-out controlled LED driver with 40V output voltage rating. With the input of 3-line serial data, it turns the 12ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
- Type: Dimmable
- Output Voltage: 40
from ROHM Semiconductor USA, LLC
The BD555BKFV controller AC/DC controller IC can be used in a wide range of dimmable LED lighting driver applications. The main target application is dimmable retro-fit LED lighting, replacing existing incandescent light bulbs, halogen spot lights, CFL tubes etc. [See More]
- Form Factor: Intgrated Circuit (IC)
- Package Type: SSOP-B14-CGD-E2
- Input Voltage: 16 to 39
- Features: RoHS Compliant
from Microchip Technology, Inc.
The MIC3223 is a constant current boost LED driver capable of driving a series string of high power LEDs. The MIC3223 can be used in general lighting, bulb replacement, garden pathway lighting, and other solid state illumination application. The MIC3223 is a peak current mode control PWM boost... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 20
- Type: Dimmable
- Output Voltage: 37
from ROHM Semiconductor GmbH
BD9408FV is a high efficiency driver for white LEDs and it is designed for large LCDs. BD9408FV has a boost DC/DC converter that can supply appropriate voltage to the light source of LEDs series array. BD9408FV has some protect functions against fault conditions, such as over voltage... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
- Type: Dimmable
- Number of Channels: 1
from ROHM Semiconductor USA, LLC
LED driver BD550FHG supports both isolated and non-isolated devices. IC enables simple design of low-power electrical converters. With switching MOSFET and current detection resistor as external devices, it enables more freedom in design. Since the peak current control is utilized, peak current is... [See More]
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 1
- Input Voltage: 8.5 to 26
- Package Type: SSOP6-CG-TR-G
from ROHM Semiconductor GmbH
BD9416FS is a high efficiency driver for white LEDs and is designed for large LCDs. BD9416FS has a boost DCDC converter that employs an array of LEDs as the light source. BD9416FS has some protection functions against fault conditions, such as over-voltage protection (OVP), over current limit... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
- Type: Dimmable
- Number of Channels: 2
from ROHM Semiconductor USA, LLC
8018340FV-M is 70V-withstanding Constant Current Controller for Automotive LED Lamps. It is able to drive at maximum 10 rows of PNP transistors. It can also contribute to reduction in the consumption power of the set as it has the integrated stand by function. The IC also incorporates a highly... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 19
- Type: Dimmable
- Number of Channels: 1
from ROHM Semiconductor GmbH
The BD8388FV-M is a serial-in parallel-out controlled LED driver with 40 V output voltage rating. With the input of 3-line serial data, it turns the 8ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
- Type: Dimmable
- Output Voltage: 40
from ROHM Semiconductor USA, LLC
BD9479FV is a high efficiency driver for white LEDsand designed for large LCDs. This IC is built-in a boostDCDC converters that employ an array of LEDs as thelight source. BD9479FV has some protect functionagainst fault conditions, such as the over-voltageprotection (OVP), the over current limit... [See More]
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 8
- Input Voltage: 9 to 35
- Package Type: SSOP-B40-CG-E2
from ROHM Semiconductor GmbH
BD9479FV is a high efficiency driver for white LED sand designed for large LCDs. This IC is built-in a boost DCDC converters that employ an array of LEDs as the light source. BD9479FV has some protect function against fault conditions, such as the over-voltage protection (OVP), the over current... [See More]
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 8
- Input Voltage: 9 to 35
- Package Type: SSOP-B40-CG-E2
from ROHM Semiconductor USA, LLC
BD9483FV is a high efficiency driver for white LEDs and designed for large LCDs. This IC is built-in 2ch boost DCDC converters that employ an array of LEDs as the light source. BD9483FV has some protect function against fault conditions, such as the over-voltage protection (OVP),the over current... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 11 to 35
- Type: Dimmable
- Number of Channels: 2
from ROHM Semiconductor GmbH
BD9483FV is a high efficiency driver for white LEDs and designed for large LCDs. This IC is built-in 2ch boost DCDC converters that employ an array of LEDs as the light source. BD9483FV has some protect function against fault conditions, such as the over-voltage protection (OVP),the over current... [See More]
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 11 to 35
- Type: Dimmable
- Number of Channels: 2