RoHS Compliant LED Drivers
from Texas Instruments
NiCd/NiMH Gas Gauge With 1-Wire (DQ) Interface And 5 LED Drivers 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
Integrated two-stage PFC + LLC/LCC resonant half-bridge controller for LED drivers in DSO-19 package. ICL5102HV control IC for LED drivers offers a unique one-package solution for lighting applications up to 350W, supporting LLC/LCC topology. It is particularly designed to deliver best performance... [See More]
- Features: RoHS Compliant
- Type: Constant Current; Constant Voltage
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-19
from RS Components, Ltd.
STMicroelectronics, STP16CP05TTR [See More]
- Features: RoHS Compliant
- Package Type: Tssop
- Form Factor: Intgrated Circuit (IC)
from DigiKey
LED Driver IC 1 Output DC DC Regulator Switched Capacitor (Charge Pump) PWM Dimming 1.2A (Flash) 10-DFN (3x3) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1200
from Texas Instruments
NiCd/NiMH Gas Gauge With 1-Wire (DQ) Interface, 5 LED Drivers And Slow-Charge Control 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
Single-stage PFC flyback controller for constant voltage output. The ICL8800 is a single-stage PFC flyback controller for constant voltage output suitable for primary and secondary side regulation. ICL8800 enables cost-optimized platform designs with exceptional PFC and THD performance at full load... [See More]
- Features: RoHS Compliant
- Type: Constant Voltage
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
High Current LED Driver, NUD4001DR2G [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Soic
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 500mA (Switch) SOT-23-6 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.5 to 16
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 27
from Texas Instruments
NiCd/NiMH Gas Gauge W/1-Wire (DQ) I/F, 5 LED Drivers, Control Signals For BQ2004 Fast-Charge IC 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
Single-stage PFC flyback controller for constant voltage output. The ICL8810 is a single-stage PFC flyback controller for constant voltage output suitable for primary- and secondary-side regulation and allows for cost-optimized designs with exceptional PFC and THD performance. It comes with... [See More]
- Features: RoHS Compliant
- Type: Constant Voltage
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
LED Driver 45V 15mA 20% CCR 0.46W SOD123 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Sod-123
from DigiKey
LED Driver IC 1 Output Linear No Dimming SOT-89-5 [See More]
- Features: RoHS Compliant
- Input Voltage: ? to 80
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 130
from Texas Instruments
NiCd/NiMH Gas Gauge With High-Speed 1-Wire (HDQ) Interface And 5 LED Drivers 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
Single-stage PFC flyback controller for constant voltage output. The ICL8820 is a single-stage PFC flyback controller for constant voltage output suitable for primary- and secondary-side regulation and allows for cost-optimized designs with exceptional PFC and THD performance. It comes with... [See More]
- Features: RoHS Compliant
- Type: Constant Voltage
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
LED Driver 50V 10mA 30% CCR 0.46W SOD123 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Sod-123
from DigiKey
LED Driver IC 1 Output Linear No Dimming 6-DFN (2x2) [See More]
- Features: RoHS Compliant
- Input Voltage: ? to 80
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 130
from Texas Instruments
Multi-Chemistry Smart Battery System (SBS) 1.0 Compliant Gas Gauge With 4 LED Drivers 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
IRS25411S - LED Buck Regulator Control IC. The IRS25411S is a high voltage, high frequency buck control ic for constant LED current regulation. The IRS25411S incorporates a continuous mode time-delayed hysteretic buck regulator to directly control the average load current, using an accurate on-chip... [See More]
- Features: RoHS Compliant
- Type: Constant Current
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 8 to 16.6
from RS Components, Ltd.
Constant-current LED driver,45V,20mA [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: SOD-123
from DigiKey
LED Driver IC 1 Output Linear Dimming 600mA TO-252-5 [See More]
- Features: RoHS Compliant
- Input Voltage: 5 to 50
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 75
from Texas Instruments
Li-Ion Gas Gauge With 1-Wire (DQ) Interface And 5 LED Drivers 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
Digital flyback XDP ™ control IC with high power factor and primary side regulation for cost-effective LED drivers. The XDPL8105 is a digital, single stage flyback controller with high power factor for constant current output LED drivers. The device offers versatile functions for different... [See More]
- Features: RoHS Compliant
- Type: Constant Current; Dimmable; Programmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
Constant-current LED driver,45V,90mA [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: TO-252
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1.2A 8-SOIC-EP [See More]
- Features: RoHS Compliant
- Input Voltage: 7 to 36
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1200
from Texas Instruments
Li-Ion Gas Gauge With High-Speed 1-Wire (HDQ) Interface And 5 LED Drivers 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
Digital flyback high power factor XDP ™ control IC for cost-effective LED drivers with constant current output and primary-side regulation. The XDP ™ control IC XDPL8210 is a digital, single-stage, quasi-resonant flyback controller with high power factor and high precision primary-side... [See More]
- Features: RoHS Compliant
- Type: Constant Current; Dimmable; Programmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
Step Down LED Driver IC 60V 1.5A DSO8 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 1.5A (Switch) 16-TSSOP-EP [See More]
- Features: RoHS Compliant
- Input Voltage: 4.5 to 40
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1500
from Texas Instruments
Multi-Chemistry SBS 0.95 Compliant Gas Gauge With 4 LED Drivers 16-SOIC 0 to 70 [See More]
- Features: RoHS Compliant
from Infineon Technologies AG
Digital high-power-factor XDP ™ controller for cost-effective, dual-stage LED drivers with secondary-side regulated constant voltage output. The XDP ™ digital power XDPL8219 is a high-performance secondary-side regulated flyback controller with high power factor and constant voltage... [See More]
- Features: RoHS Compliant
- Type: Constant Voltage
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
16ch con.current LED Driver 0.1A TSSOP24 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Tssop
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1.5A (Switch) 8-SOP-EP [See More]
- Features: RoHS Compliant
- Input Voltage: 4.5 to 40
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1500
from Texas Instruments
PMIC/LED Driver for DLP3010 (0.3 720p) DMD 100-HTQFP [See More]
- Features: RoHS Compliant
from Infineon Technologies AG
Digital high power factor XDP ™ controller for advanced, dual stage LED drivers with constant voltage primary-side regulation. The XDPL8221 connects a digital quasi-resonant PFC XDP ™ control stage and a quasi-resonant flyback controller with primary-side regulation. A serial... [See More]
- Features: RoHS Compliant
- Type: Constant Current; Constant Voltage
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-16
from RS Components, Ltd.
350mA LED driver w/internal sw,ZXLD1350 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Output Current: 500
from DigiKey
LED Driver IC 1 Output DC DC Controller Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 14-SOP [See More]
- Features: RoHS Compliant
- Input Voltage: 4.5 to 36
- Form Factor: Intgrated Circuit (IC)
from Texas Instruments
Digitally Controlled 62 dB Audio Attenuator with/Mute 8-SOIC -40 to 85 [See More]
- Features: RoHS Compliant
- Package Type: SOIC
- Form Factor: Intgrated Circuit (IC)
from Infineon Technologies AG
The ILD6150 switch mode DC-DC LED driver is tailored to drive high power LEDs and LED arrays offering flexible dimming options. Summary of Features. Supports buck topology. Wide usable input voltage from 4.5-60V. Integrated switch rated up to 1500mA. PWM or analog dimming. Adjustable over... [See More]
- Features: RoHS Compliant
- Output Current: 1500
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8-27
from RS Components, Ltd.
6V-60V input,1A LED driver,ZXLD1362 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1250
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1A TSOT-23-5 [See More]
- Features: RoHS Compliant
- Input Voltage: 7 to 36
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1000
from Texas Instruments
Regulated 2X, 1.5X Switched Capacitor White LED Driver 10-WSON -40 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.8 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 5
from Infineon Technologies AG
80V DC-DC buck LED driver IC with hybrid dimming down to 0.5%. The ILD8150 is a 80V DC-DC converter IC, designed to drive high power LEDs. For applications operating close to safe extra-low voltage (SELV) limits, it provides a high safety voltage margin. The buck LED driver IC is tailored for LEDs... [See More]
- Features: RoHS Compliant
- Output Current: 1500
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
LED Driver Controller 60V 0.5% TSSOP16EP [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 65
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1.2A 8-SOP-EP [See More]
- Features: RoHS Compliant
- Input Voltage: 7 to 36
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1200
from Texas Instruments
High Power Switched Capacitor Voltage Convertor/Flash LED Driver 10-WSON -40 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Package Type: WSON
from Infineon Technologies AG
80V DC-DC buck LED driver IC with hybrid dimming down to 0.5%. The ILD8150E is a 80V DC-DC converter IC, designed to drive high power LEDs. For applications operating close to safe extra-low voltage (SELV) limits, it provides a high safety voltage margin. The buck LED driver IC is tailored for LEDs... [See More]
- Features: RoHS Compliant
- Output Current: 1500
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
LED DRVR 7Segment 9V to 24V 5Pin TSOT23 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Sot-23
from DigiKey
LED Driver IC 4 Output DC DC Regulator Step-Up (Boost) PWM Dimming 40mA 16-WQFN (3x3) [See More]
- Features: RoHS Compliant
- Input Voltage: 4.2 to 24
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 43
from Texas Instruments
800mA Switched Capacitor Flash LED Driver with Time-Out Protection 24-WQFN -40 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.8 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: ? to 800
from Infineon Technologies AG
Coolest dimming solution 0-10V. CDM10V is a fully integrated 0-10V dimming interface IC and comes in a 6pin SOT package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a... [See More]
- Features: RoHS Compliant
- Output Current: 5
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-SOT23-6
from RS Components, Ltd.
IC,LED Driver,Buck,Step down,1A,MSOP8 EP [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Msop
from DigiKey
LED Driver IC 4 Output DC DC Regulator Step-Up (Boost) Analog, PWM Dimming 30mA 20-WQFN (4x4) [See More]
- Features: RoHS Compliant
- Input Voltage: 7 to 40
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 60
from Texas Instruments
Multi-Display Inductorless LED Driver with 32 Exponential Dimming Steps in micro SMD 20-DSBGA -30 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 6
from Infineon Technologies AG
CDM10V-2, is a fully integrated 0-10V dimming interface IC and comes in a 6 pin SOT package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10V dimmer or potentiometer... [See More]
- Features: RoHS Compliant
- Output Current: 5
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-SOT23-6
from RS Components, Ltd.
Step-down LED Driver 1.5MHz 6V 1A SOT-25 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Sot-23
from DigiKey
LED Driver IC 8 Output DC DC Regulator Step-Up (Boost) Analog, PWM Dimming 30mA 24-WQFN (4x4) [See More]
- Features: RoHS Compliant
- Input Voltage: 6 to 24
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 40
from Texas Instruments
Switched Capacitor Flash LED Driver in micro SMD 12-DSBGA -40 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: ? to 700
from Infineon Technologies AG
CDM10V-3 is a fully integrated 0-10V dimming interface IC and comes in a 6-pin SOT package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10V dimmer or potentiometer... [See More]
- Features: RoHS Compliant
- Output Current: 5
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-SOT23-6
from RS Components, Ltd.
High Power 3W LED Driver 6V 1.5A SO8EP [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Sop
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 400mA (Switch) TSOT-23-6 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: 400
from Texas Instruments
1A Switched Capacitor Flash LED Driver with I2C Compatible Interface 12-WSON -30 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: ? to 1000
from Infineon Technologies AG
CDM10VD is a fully integrated 0-10V dimming interface IC and comes in a 6pin SOT package to cover space requirements on small PCBs. The device is coming in 4 different variants with different feature sets. The CDM10VD family is targeted for various dimming applications in lighting which requires... [See More]
- Features: RoHS Compliant
- Output Current: 1
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-SOT23-6
from RS Components, Ltd.
100V Adj. Current Sink LED Driver SOT-26 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Output Current: 350
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 400mA (Switch) 8-WDFN (2x2) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: 400
from Texas Instruments
Current Regulated Switched Capacitor LED Driver with Analog Brightness Control 10-WSON -30 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 5.8
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 6
from Infineon Technologies AG
Smart ballast IC for UV-C disinfection lamps. The smart ballast controller for UV-C disinfection lamps (ICB2FL03G) comes in a slim SO-16 package. It is tailored for cost-performance optimized applications operating UV-C lamps. The ICB2FL03G integrates all functions required to operate UV-C... [See More]
- Features: RoHS Compliant
- Output Current: 300 to 500
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-16
from RS Components, Ltd.
High Efficiency 36V 1A LED Driver SOT-25 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 40
from DigiKey
LED Driver IC 1 Output DC DC Controller Step-Up (Boost) PWM Dimming SOT-23-6 [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 13.5
- Form Factor: Intgrated Circuit (IC)
from Texas Instruments
Dual-Display White LED Driver with 3/2x Switched Capacitor Boost 18-DSBGA -30 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Efficiency: 80
from Infineon Technologies AG
NFC configuration IC with pulse width modulation (PWM) output NLM0010. Infineon ’s dual-mode NFC configuration IC (NLM0010) with pulse width modulation (PWM) output is designed for LED applications to enable the emerging NFC-programming feature, which is compatible with the Module-Driver... [See More]
- Features: RoHS Compliant
- Package Type: PG-SOT23-5
- Form Factor: Intgrated Circuit (IC)
from RS Components, Ltd.
LED Driver IC 25W eSIP-7 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Esip-7c
from DigiKey
LED Driver IC 4 Output DC DC Regulator Switched Capacitor (Charge Pump) PWM Dimming 25mA 12-WQFN (2x2) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.8 to 4.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: 25
from Texas Instruments
White LED Driver System with I2C Compatible Brightness Control 24-WQFN [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Efficiency: 87
from Infineon Technologies AG
NFC configuration IC with integrated CLO function and pulse width modulation (PWM) output NLM0011. Infineon ’s dual-mode NFC configuration IC (NLM0011) with pulse width modulation (PWM) output is designed for LED applications to enable the emerging NFC programming feature, which is compatible... [See More]
- Features: RoHS Compliant
- Package Type: PG-SOT23-5
- Form Factor: Intgrated Circuit (IC)
from RS Components, Ltd.
15mA LED Display Driver MM5450YV [See More]
- Features: RoHS Compliant
- Output Voltage: 12
- Form Factor: Intgrated Circuit (IC)
- Package Type: Plcc
from DigiKey
LED Driver IC 5 Output DC DC Regulator Switched Capacitor (Charge Pump) PWM Dimming 25mA 16-WQFN (2x3) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.8 to 4.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: 25
from Texas Instruments
Dual Display White LED Driver with I2C Compatible Brightness Control 24-WQFN [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Efficiency: 91
from Infineon Technologies AG
Linear LED driver IC for low power LEDs. The BCR402U linear LED driver IC is tailored to drive low power LEDs in general and automotive lighting applications. Summary of Features. LED drive current preset to 20mA. Output current adjustable by resistor up to 65mA. Supply voltage up to 40V. High side... [See More]
- Features: RoHS Compliant
- Output Current: 20 to 65
- Form Factor: Intgrated Circuit (IC)
- Output Power: 0.7500
from RS Components, Ltd.
LED Driver 18-SOIC 9V/12V/15V/18V/24V [See More]
- Features: RoHS Compliant
- Output Voltage: 50
- Form Factor: Intgrated Circuit (IC)
- Package Type: Sop
from DigiKey
LED Driver IC 1 Output AC DC Offline Switcher Step-Up (Boost) Dimming 8-SOP [See More]
- Features: RoHS Compliant
- Input Voltage: 8 to 32
- Form Factor: Intgrated Circuit (IC)
from Texas Instruments
White LED Driver with I2C Compatible Interface 24-WQFN -30 to 85 [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Efficiency: 91
from Infineon Technologies AG
Linear low-voltage-drop LED driver IC. Long term reliability and longevity of LEDs are key. BCR430U is the best choice when you need to drive low-power LED strings and strips supplied by a DC voltage source and at the same time requesting more flexibility in voltage headroom. BCR430U is a linear LED... [See More]
- Features: RoHS Compliant
- Output Current: 20 to 100
- Form Factor: Intgrated Circuit (IC)
- Output Power: 0.6000
from RS Components, Ltd.
Linear LED Driver 200mA 40V U-DFN2020-6 [See More]
- Features: RoHS Compliant
- Package Type: UDFN-2020-6
- Form Factor: Intgrated Circuit (IC)
from DigiKey
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1.2A 8-MSOP [See More]
- Features: RoHS Compliant
- Input Voltage: 7 to 36
- Form Factor: Intgrated Circuit (IC)
- Output Current: 1200
from Texas Instruments
Hysteretic PFET Controller for High Power LED Drive 8-VSSOP -40 to 125 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 35
from Infineon Technologies AG
Linear LED driver IC for low power LEDs. The BCR402W linear LED driver IC is tailored to drive low power LEDs in general and automotive lighting applications. Summary of Features. LED drive current preset to 20mA. Output current adjustable by resistor up to 60mA. Supply voltage up to 18V. High side... [See More]
- Features: RoHS Compliant
- Output Current: 20 to 60
- Form Factor: Intgrated Circuit (IC)
- Output Power: 0.5000
from RS Components, Ltd.
Linear LED Driver 200mA 40V U-DFN2020-6 [See More]
- Features: RoHS Compliant
- Package Type: UDFN-2020-6
- Form Factor: Intgrated Circuit (IC)
from DigiKey
LED Driver IC 2 Output DC DC Regulator Step-Up (Boost) I ²C, PWM Dimming 10-WLCSP (0.87x2.07) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.5 to 5.5
- Form Factor: Intgrated Circuit (IC)
from Texas Instruments
0.5A Constant Current Buck Regulator for High Power LED Drivers 8-VSSOP -40 to 125 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 42
from Infineon Technologies AG
Linear low-voltage-drop LED driver IC. Infineon ’s BCR431U is a linear LED driver IC in a small SOT23-6 package regulating the LED current in standalone operation without any external power transistor. It is suitable for driving currents up to 37mA and the IC supply voltage ranges from 6V up... [See More]
- Features: RoHS Compliant
- Output Current: 8 to 43
- Form Factor: Intgrated Circuit (IC)
- Output Power: 0.6000
from RS Components, Ltd.
LED Driver Module 4.5-60V 450mA TO263-7 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: To-263
from DigiKey
LED Driver IC 2 Output DC DC Regulator Step-Up (Boost) PWM Dimming 20mA 10-WLCSP (0.87x2.07) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.5 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 23
from Texas Instruments
0.5A Constant Current Buck Regulator for High Power LED Drivers 8-VSSOP -40 to 125 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 75
from Infineon Technologies AG
60V linear LED controller IC with voltage feedback to primary side / Active Headroom Control. BCR601 is a linear LED controller IC regulating the LED current with an external driver transistor. It supports either NPN bipolar transistors or N-channel MOSFETs to cover a wide LED current and power... [See More]
- Features: RoHS Compliant
- Output Power: 0.3600
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-DSO-8
from RS Components, Ltd.
Buck DC-DC LED Driver 60V 2.5A VSSOP10 [See More]
- Features: RoHS Compliant
- Type: Dimmable
from DigiKey
LED Driver IC 6 Output DC DC Regulator Step-Up (Boost) I ²C, PWM Dimming 25mA 20-WQFN (3.5x3.5) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 24
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 36
from Texas Instruments
1.0A Constant Current Buck Regulator for High Power LED Drivers 8-SOIC -40 to 125 [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 42
from Infineon Technologies AG
60V linear LED controller IC for dimmable LED. The BCR602 is a perfect fit for 48V LED applications by combining small form factor with low cost. Through its higher integration, BOM savings and ensuring long lifetime of LEDs, this controller has many advantages compared to discrete solutions. BCR602... [See More]
- Features: RoHS Compliant
- Output Power: 0.3600
- Form Factor: Intgrated Circuit (IC)
- Package Type: PG-SOT23-6
from RS Components, Ltd.
LED Driver 3.3V/5V/9V [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Package Type: Mlf
from DigiKey
LED Driver IC 2 Output DC DC Regulator Step-Up (Boost) PWM Dimming 20mA 9-WLCSP (1.35x1.35) [See More]
- Features: RoHS Compliant
- Input Voltage: 2.5 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Current: 20
from LCSC Electronics Technology (HK) Limited
SOP-16 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from PREMA Semiconductor GmbH
Power LED drivers for up to 40V supply voltage. Driving more than 9W output power with external switch. Small package SOT23-5L for PR4103 [See More]
- Features: ESD Protected; RoHS Compliant
- Input Voltage: 21
- Form Factor: Intgrated Circuit (IC)
- Package Type: SOT23
LED Driver with I²C Compatible and 3-wire Serial Interface
for 8x16 LEDs in Dot Matrix
from ROHM Semiconductor GmbH
BU16501KS2 is “Matrix LED Driver ” that is the most suitable for the Home Appliance. It can control 8x16 (128 dot) LED Matrix by internal 8-channel PMOS SWs and 16-channel LED drivers. It can control the brightness in each dot by the setting of the internal register. It supports SPI and... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from ROHM Semiconductor USA, LLC
BD9207FPS is a LED driver with built-in step-down switching regulator and incorporates the built-in switching MOS FET of Pch. Feedback voltage is as low as 0.2V and can suppress the loss on the sense resistance of LED. It is operated by PWM method with an oscillating frequency of 900 KHz and can use... [See More]
- Features: RoHS Compliant
- Input Voltage: 8 to 35
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 36
from Utmel Electronic Limited
100W FLYBACK CV/CC LED DRIVER WI [See More]
- Features: RoHS Compliant
- Package Type: 24-PowerSMD Module (0.425, 10.80mm Width), 17 Leads
from XP Power
The DLE series of AC input LED drivers incorporate universal input with active power factor correction in a two power stage design, eliminating flicker while providing a high efficiency solution. Designed as a class II isolation product, without the need for a safety earth, DLE series LED drivers... [See More]
- Features: ESD Protected; Over-Voltage Protection; RoHS Compliant
- Input Voltage: 90 to 305
from Microchip Technology, Inc.
The MIC3289 is a PWM boost-switching regulator that is optimized for constant-current white LED driver applications. The MIC3289 features an internal Schottky diode, allowing an efficient DC/DC solution that requires only four external components. The MIC3289 allows for a single wire simple digital... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.5 to 6.5
from LCSC Electronics Technology (HK) Limited
SOP-28-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from PREMA Semiconductor GmbH
The core of this white LED driver consists of a step-up converter with current output, which provides an output voltage of typically 3.6 V for white LEDs. The input voltage can be as low as 0.9V, thus allowing a. single cell battery operation. For operation of up three LEDs is only one external... [See More]
- Features: ESD Protected; RoHS Compliant
- Input Voltage: 0.9000
- Form Factor: Intgrated Circuit (IC)
- Package Type: SOT23
from ROHM Semiconductor GmbH
The BD83812EFV-M is a serial-in parallel-out controlled LED driver. With the input of 3-line serial data, it turns the 12ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from ROHM Semiconductor USA, LLC
The BD7757MWX is a 1.5A Flash LED Driver with Synchronous rectification step up DC/DC converter that can drive 1LED. The LED current, timer, and UVLO threshold can be varied by using UPIC++ (Uni-Port Interface Control ++). [See More]
- Features: RoHS Compliant
- Input Voltage: 2.7 to 5
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 5.1
from Utmel Electronic Limited
12CH LED DRIVER IC WITH 3-LINE S [See More]
- Features: RoHS Compliant
- Package Type: 20-TSSOP (0.173, 4.40mm Width)
- Form Factor: Intgrated Circuit (IC)
from Microchip Technology, Inc.
The MIC2292 and MIC2293 are high frequency, pulse-width modulator (PWM) boost regulators optimized for constant-current, white LED driver applications. Because of their constant PWM switching frequencies of 1.6MHz and 2MHz, respectively, the MIC2292/93 can use the smallest external components,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.5 to 10
from LCSC Electronics Technology (HK) Limited
SOP-28-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from PREMA Semiconductor GmbH
LED solar lamps operate with automatic LED control depending on the ambient light level. The battery is charged by solar cells. Normally this requires several components like Schottky diodes, capacitors, resistors, two or three rechargeable battery cells and a photo resistor. In contrast to this... [See More]
- Features: ESD Protected; RoHS Compliant
- Input Voltage: 0.9000
- Form Factor: Intgrated Circuit (IC)
- Package Type: SO8
from ROHM Semiconductor GmbH
The BD8389FV-M is a serial-in parallel-out controlled LED driver with 40V output voltage rating. With the input of 3-line serial data, it turns the 12ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from ROHM Semiconductor USA, LLC
The BD8379EFV-M is a serial-in parallel-out controlled LED driver with 35V output voltage rating. With the input of 3-line serial data, it turns the 12ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 35
from Utmel Electronic Limited
1A Step-Down Bright LED Driver SOT89-5 [See More]
- Features: RoHS Compliant
- Package Type: SOT-89-5/6
from Microchip Technology, Inc.
The MIC2292C and MIC2293C are high frequency, pulse-width modulator (PWM) boost regulators optimized for constant-current, white LED driver applications. Because of their constant PWM switching frequencies of 1.6MHz and 2MHz, respectively, the MIC2292/93C can use the smallest external components,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.5 to 10
from LCSC Electronics Technology (HK) Limited
SOP-16 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from PREMA Semiconductor GmbH
The new PR4404 is a LED driver providing more than 150mA out of one battery cell and up to 300mA from two batteries for one to three power LEDs. A hold input allows controlling the LED brightness via a PWM signal or switching the LED from a microcontroller. [See More]
- Features: ESD Protected; RoHS Compliant
- Input Voltage: 1.2 to 1.5
- Form Factor: Intgrated Circuit (IC)
- Package Type: SOIC
from ROHM Semiconductor GmbH
BD12801MUF-M is 16-channel constant current driver with 13bit PWM dimming and 8bit local DC dimming individual channels. Communication with μController via SPI is feasible. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from ROHM Semiconductor USA, LLC
The BD8379FV-M is a serial-in parallel-out controlled LED driver with 35V output voltage rating. With the input of 3-line serial data, it turns the 2ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from Utmel Electronic Limited
2.7V-5.5V INPUT, 24V OVP, PROGRAMMABLE FSW, WHITE LED DRIVER [See More]
- Features: RoHS Compliant
- Package Type: SOT-23-8 Thin, TSOT-23-8
- Type: Programmable
from Microchip Technology, Inc.
The MIC2860-2D is a high efficiency White LED (WLED) driver designed to drive two WLEDs and greatly extend battery life for portable display backlighting, and keypad backlighting in low cost mobile devices. The MIC2860-2D architecture provides the highest possible efficiency by eliminating switching... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from LCSC Electronics Technology (HK) Limited
I2C 3V~5.5V 25mA 80mA SOIC-20-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 5.5
from ROHM Semiconductor GmbH
The BD83816EFV-M is a serial-in parallel-out controlled LED driver with 35 V output voltage rating. With the input of 3-line serial data, it turns the 16 ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from ROHM Semiconductor USA, LLC
BD9409F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9409F has a boost DCDC converter that employs an array of LEDs as the light source. BD9409F has some protect functions against fault conditions, such as over-voltage protection (OVP), over current limit protection... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 11.5 to 35
from Utmel Electronic Limited
6-CHANNEL WHITE LED DRIVER FOR U [See More]
- Features: RoHS Compliant
- Package Type: 24-VFQFN Exposed Pad
- Output Voltage: 42.5
from Microchip Technology, Inc.
The MIC2860-2P is a high-efficiency white LED (WLED) driver designed to drive two WLEDs and greatly extend battery life for portable display backlighting and keypad backlighting in low cost mobile devices. The MIC2860-2P architecture provides the highest possible efficiency by eliminating switching... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from LCSC Electronics Technology (HK) Limited
SOP-16 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD9408FV is a high efficiency driver for white LEDs and it is designed for large LCDs. BD9408FV has a boost DC/DC converter that can supply appropriate voltage to the light source of LEDs series array. BD9408FV has some protect functions against fault conditions, such as over voltage... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from ROHM Semiconductor USA, LLC
BD9413F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9413F has a boost DC/DC converter that employs an array of LEDs as the light source. BD9413F has some protect functions against fault conditions, such as over-voltage protection (OVP), over current limit protection... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from Utmel Electronic Limited
8CH LED DRIVER IC FOR AUTOMOTIVE [See More]
- Features: RoHS Compliant
- Package Type: 16-LSSOP (0.173, 4.40mm Width)
- Form Factor: Intgrated Circuit (IC)
from Microchip Technology, Inc.
The MIC2292C and MIC2293C are high frequency, pulse-width modulator (PWM) boost regulators optimized for constant-current, white LED driver applications. Because of their constant PWM switching frequencies of 1.6MHz and 2MHz, respectively, the MIC2292/93C can use the smallest external components,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.5 to 10
from LCSC Electronics Technology (HK) Limited
2 线 串 行 接 口 3V~5.5V SOP-16 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 5.5
from ROHM Semiconductor GmbH
BD9409F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9409F has a boost DCDC converter that employs an array of LEDs as the light source. BD9409F has some protect functions against fault conditions, such as over-voltage protection (OVP), over current limit protection... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 11.5 to 35
from ROHM Semiconductor USA, LLC
BD8119FM-M is a white LED driver with the capability of withstanding high input voltage (36V Max.). This driver has 4-ch constant-current drivers integrated in 1-chip, which each channel can draw up to 150mA max, so that high brightness LED driving can be realized. Furthermore, a current-mode... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5 to 30
from Utmel Electronic Limited
AL8806 Series 36 V 1.5 A SMT High Efficiency Buck LED Driver - MSOP-8EP [See More]
- Features: RoHS Compliant
- Package Type: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Output Current: 1500
from Microchip Technology, Inc.
The MIC2292 and MIC2293 are high frequency, pulse-width modulator (PWM) boost regulators optimized for constant-current, white LED driver applications. Because of their constant PWM switching frequencies of 1.6MHz and 2MHz, respectively, the MIC2292/93 can use the smallest external components,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.5 to 10
from LCSC Electronics Technology (HK) Limited
3 线 串 行 接 口 1MHz 3V~5.5V SOP-16 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
- Input Voltage: 3 to 5.5
from ROHM Semiconductor GmbH
BD9411F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9411F has a boost DCDC converter that employs an array of LEDs as the light source. BD9411F has some protect functions against fault conditions, such as over-voltage protection (OVP), over current limit protection... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from ROHM Semiconductor USA, LLC
BD1604MUV and BD1604MVV is a 4 white LED driver for small LCD backlight. At the charge pump type, the number of external devices is minimized. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from Utmel Electronic Limited
ALLEGRO MICROSYSTEMS A6277ELW-T LED DRIVER, 8BIT SERIAL-INPUT, SMD [See More]
- Features: RoHS Compliant
- Output Current: 120
- Input Voltage: 4.5 to 5.5
- Number of Channels: 16
from Microchip Technology, Inc.
The CL320 is designed to drive 3 strings of LEDs at a constant current of 20mA. Other drivers with currents in the range of 20 - 30mA are available. The drive current is fixed, with a ±6% tolerance over a VOUT range of 4.0 - 15V. Separate enable pins for each channel allow for PWM dimming,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6.5 to 90
from LCSC Electronics Technology (HK) Limited
SOP-20-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BM531Q11 is a high efficiency driver for white LEDs and designed for large LCDs. BM531Q11 is built-in a quasi-resonant control method DCDC converter that employ an array of LEDs as the light source. BM531Q11 is built-in 250V MOSFET and owing to the external current setting resistance, a power supply... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from ROHM Semiconductor USA, LLC
BD6586MUV is white LED driver IC with PWM step-up DC/DC converter that can boost max 24V and current driver that can drive max 25mA. The wide and precision brightness can be controlled by external PWM pulse. BD6586MUV has very accurate current drivers, and it has few current errors between each... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from Utmel Electronic Limited
AS Series 330 mA 5.5 V Through Hole 4-Digit LED Display Driver - PDIP-20 [See More]
- Features: RoHS Compliant
- Output Current: 320
- Output Voltage: 3.5
- Package Type: 20-DIP (0.300, 7.62mm)
from Microchip Technology, Inc.
The CL325 is designed to drive 3 strings of LEDs at a constant current of 25mA. Other drivers with currents in the range of 20 - 30mA are available. The drive current is fixed, with a ±6% tolerance over a VOUT range of 4.0 - 15V. Separate enable pins for each channel allow for PWM dimming,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6.5 to 90
from LCSC Electronics Technology (HK) Limited
SOP-28-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD18353EFV-M/MUF-M is a 1ch LED Controller. High side current detection amplifier is built-in. PWM dimming duty can be freely set with built-in PWM generation circuit. PWM dimming realizes by driving an external P-ch MOSFET. Outputs abnormal LED status to the FAULT_B pin. Two systems of analog... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5 to 65
from ROHM Semiconductor USA, LLC
BD81A24EFV-M is a white LED driver with the capability of withstanding high input voltage (35V Max). This driver has 4ch constant-current drivers integrated in 1-chip, where each channel can draw up to 120mA (Max), which is also suitable for high illumination LED drive. Furthermore, a buck-boost... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 35
from Utmel Electronic Limited
AS Series 5.5 V 3.4 MHz SMT I2C Interfaced LED Driver with Keyscan - QSOP-24 [See More]
- Features: RoHS Compliant
- Package Type: 24-SSOP (0.154, 3.90mm Width)
from Microchip Technology, Inc.
The CL330 is designed to drive 3 strings of LEDs at a constant current of 30mA. Other drivers with currents in the range of 20 - 30mA are available. The drive current is fixed, with a ±6% tolerance over a VOUT range of 4.0 - 15V. Separate enable pins for each channel allow for PWM dimming,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6.5 to 90
from LCSC Electronics Technology (HK) Limited
SSOP-28-150mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The BD2812GU is a RGB LED driver specifically engineered for decoration purposes. This RGB driver incorporates lighting patterns and illuminates without imposing any load on CPU. This RGB driver is best-suited for illumination using RGB LEDs and decoration using monochrome LEDs. The DC/DC converter... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from ROHM Semiconductor USA, LLC
BD8372HFP-M and BD8372EFJ-M are a LED source driver with the capability of withstanding high input voltage (50V Max.). The fixed current output can change in the H/L current, and it is the best for automotive LED drive. It is built into LED open/short protection, external resistance open/short... [See More]
- Features: RoHS Compliant
- Input Voltage: 5.5 to 40
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 50
from Utmel Electronic Limited
DIODES INC. AP8801SG-13 Led Driver, 1 Output, Buck (Step Down), 8V-48V in, 500kHz switch,500mA out, SOP-8 [See More]
- Features: RoHS Compliant
- Output Voltage: 48
- Input Voltage: 24
- Output Current: 500
from Microchip Technology, Inc.
The HV9985 is a three-channel peak current mode PWM controller for driving single switch converters in a constant output current mode. It can be used for driving either RGB LEDs or multiple channels of white LEDs. The HV9985 features a 40V linear regulator, which provides a 5.0V supply to power the... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 10 to 40
from LCSC Electronics Technology (HK) Limited
SSOP-24-150mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The BD2802GU is a RGB LED driver specifically engineered for decoration purposes. This RGB driver incorporates lighting patterns and illuminates without imposing any load on CPU. This RGB driver is best-suited for illumination using RGB LEDs and decoration using monochrome LEDs. .In addition, this... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from ROHM Semiconductor USA, LLC
BD8372HFP-M and BD8372EFJ-M are a LED source driver with the capability of withstanding high input voltage (50V Max.). The fixed current output can change in the H/L current, and it is the best for automotive LED drive. It is built into LED open/short protection, external resistance open/short... [See More]
- Features: RoHS Compliant
- Input Voltage: 5.5 to 40
- Form Factor: Intgrated Circuit (IC)
- Output Voltage: 50
from Utmel Electronic Limited
DIODES INC. ZXLD1366DACTC IC, LED DRIVER, 1A, 60V, DFN633 [See More]
- Features: RoHS Compliant
- Output Current: 1000
- Input Voltage: 6 to 60
- Efficiency: 97
from Microchip Technology, Inc.
The HV9980 is a fully integrated 3-channel peak-current PWM controller for driving buck converters in constant output current mode. It is optimized for use with a large array of 20~80mA LED strings, where multiple HV9980 ICs are used sharing a common clock and a common reference voltage. Both the... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 100 to 160
from LCSC Electronics Technology (HK) Limited
SOP-32-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD2808MUV-M is 24ch Constant current sink LED Driver with a high output voltage capability. This device is optimized for driving RGB LEDs featuring a 6bit Current DAC for each color. 8bit PWM control is integrated for each channel. Small VQFN48MCV070 package. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from ROHM Semiconductor USA, LLC
BD9423EFV is a high efficiency driver for white LEDs and designed for large LCD panel. This IC is built-in high current drive and high responsibility type 6ch LED drivers and 1ch boost DCDC converter. BD9423EFV has some protect function against fault conditions, such as the over-voltage protection... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from Utmel Electronic Limited
DiodesZetex PAM2842RGR LED Driver IC, 5.540 V dc 350mA 20-Pin TSSOP [See More]
- Features: RoHS Compliant
- Output Voltage: -0.3000 to 40
- Input Voltage: 24
- Output Current: 3500
from Microchip Technology, Inc.
The HV9921 is a pulse width modulated (PWM) high-efficiency LED driver control IC. It allows efficient operation of LED strings from voltage sources ranging up to 400VDC. The HV9921 includes an internal high voltage switching MOSFET controlled with fixed off-time (TOFF) of approximately 10.5... [See More]
- Features: RoHS Compliant
- Input Voltage: 20 to 400
- Form Factor: Intgrated Circuit (IC)
- Package Type: TO-92, SOT-89
from LCSC Electronics Technology (HK) Limited
SOIC-24-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD9416F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9416F has a boost DCDC converter that employs an array of LEDs as the light source. BD9416F has some protection functions against fault conditions, such as over-voltage protection (OVP), over current limit... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from ROHM Semiconductor USA, LLC
The BD8378FV-M is a serial-in parallel-out controlled LED driver with 35V output voltage rating. With the input of 3-line serial data, it turns the ch open drain output on/off. It is optimal for small space due to its compact size. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from Utmel Electronic Limited
DIP-8 LED Drivers RoHS [See More]
- Features: RoHS Compliant
- Package Type: DIP-8
from Microchip Technology, Inc.
The HV9922 is a pulse width modulated (PWM) high-efficiency LED driver control IC. It allows efficient operation of LED strings from voltage sources ranging up to 400VDC. The HV9922 includes an internal high voltage switching MOSFET controlled with fixed off-time (TOFF) of approximately 10.5... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 20 to 400
from LCSC Electronics Technology (HK) Limited
PDIP-40 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD9416FS is a high efficiency driver for white LEDs and is designed for large LCDs. BD9416FS has a boost DCDC converter that employs an array of LEDs as the light source. BD9416FS has some protection functions against fault conditions, such as over-voltage protection (OVP), over current limit... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 9 to 35
from ROHM Semiconductor USA, LLC
BD521GOFJ is an AC/DC converter for LED lighting. This IC can be applied to quasi-resonant typed high-side LED driver application, and the high current precision and low EMI noise can be achieved. Moreover, owing to the built-in PFC (Power Factor Correction) converter, the harmonic is improved. By... [See More]
- Features: RoHS Compliant
- Input Voltage: 8.9 to 25
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 1
from Utmel Electronic Limited
Display Drivers & Controllers (QVGA) 320x240 LCD Controller @ 16bpp [See More]
- Features: RoHS Compliant
- Package Type: 128-TQFP
from Microchip Technology, Inc.
The HV9923 is a pulse width modulated (PWM) high-efficiency LED driver control IC. It allows efficient operation of LED strings from voltage sources ranging up to 400VDC. The HV9923 includes an internal high voltage switching MOSFET controlled with fixed off-time (TOFF) of approximately 10.5... [See More]
- Features: RoHS Compliant
- Input Voltage: 20 to 400
- Form Factor: Intgrated Circuit (IC)
- Package Type: TO-92, SOT-89
from LCSC Electronics Technology (HK) Limited
SOIC-18-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The BD18397RUV-M are 2ch synchronous buck DC/DC LED drivers with using on-time topology supporting near fixed switching frequency and fast switching duty regulation and with using average LED current feed buck topology for more accreted LED current regulation system over wide input, LED output... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5 to 65
from ROHM Semiconductor USA, LLC
The AC/DC quasi-resonant controller type LED driver IC BM520Q15F can be applied to a non-isolated application, making the designs for various types of low power converter easy. The low power consumption and high-speed start are achieved through the start-up circuit with 650V withstand voltage. Due... [See More]
- Features: RoHS Compliant
- Input Voltage: 8.9 to 26
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 1
from Utmel Electronic Limited
Display Drivers & Controllers HVCMOS [See More]
- Features: RoHS Compliant
- Package Type: 8-SOIC (0.154, 3.90mm Width)
- Output Current: 4
from Microchip Technology, Inc.
The MIC3230/1/2 are constant current boost switching controllers specifically designed to power one or more strings of high power LEDs. The MIC3230/1/2 have an input voltage range from 6V to 45V and are ideal for a variety of solid state lighting applications. The MIC3230/1/2 utilizes an external... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 45
from LCSC Electronics Technology (HK) Limited
QFN-44-EP(5x5) LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The BD2801MUV is a 3ch linear constant-current LED driver IC with a built-in charge pump power supply, allowing the output current of each channel to be adjusted by external resistors connected to the IREF pin. In addition, each ch can be controlled ON/OFF by inputting an external signal. It is... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3.13 to 3.46
from ROHM Semiconductor USA, LLC
BM521Q25F is an AC/DC converter for LED lighting, which has a built-in MOSFET with 650V withstand voltage. This IC can be applied to quasi-resonant typed High-side LED driver application, and the high current precision and Low EMI noise can be achieved. Moreover, owing to the built-in PFC (Power... [See More]
- Features: RoHS Compliant
- Input Voltage: 8.9 to 25
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 1
from Utmel Electronic Limited
Display Drivers & Controllers Low Noise High Voltage EL Lamp [See More]
- Features: RoHS Compliant
- Package Type: 8-WDFN Exposed Pad
from Microchip Technology, Inc.
The AT9932 is an advanced fixed frequency PWM controller IC designed to control an LED lamp driver using a boost-buck topology that can step the input voltage up or down automatically. The IC provides fast output current transient response and very low susceptibility to input voltage transients,... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5.3 to 40
from LCSC Electronics Technology (HK) Limited
QFN-28-EP(4x4) LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD6586MUV is white LED driver IC with PWM step-up DC/DC converter that can boost max 24V and current driver that can drive max 25mA. The wide and precision brightness can be controlled by external PWM pulse. BD6586MUV has very accurate current drivers, and it has few current errors between each... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from ROHM Semiconductor USA, LLC
The BD555BKFV controller AC/DC controller IC can be used in a wide range of dimmable LED lighting driver applications. The main target application is dimmable retro-fit LED lighting, replacing existing incandescent light bulbs, halogen spot lights, CFL tubes etc. [See More]
- Features: RoHS Compliant
- Input Voltage: 16 to 39
- Form Factor: Intgrated Circuit (IC)
- Package Type: SSOP-B14-CGD-E2
from Utmel Electronic Limited
Display Drivers & Controllers ON-SCREEN DISPLAY CONTROL [See More]
- Features: RoHS Compliant
- Package Type: 30-SOP (0.311, 7.90mm Width)
from Microchip Technology, Inc.
The AT9917 is an advanced fixed frequency PWM IC designed to control single-switch, boost, SEPIC, and buck LED drivers in a constant current mode. The controller uses a peak current-mode control scheme (with programmable slope compensation) and includes an internal transconductance amplifier to... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5.3 to 40
from LCSC Electronics Technology (HK) Limited
SOP-24-300mil LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
This IC is white LED driver IC with PWM step-up DC/DC converter that can boost max 41V and current driver that can drive max 100mA. The wide and precision brightness can be controlled by external PWM pulse. This IC has very accurate current drivers, and it has few current errors between each... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 27
from ROHM Semiconductor USA, LLC
LED driver BD550FHG supports both isolated and non-isolated devices. IC enables simple design of low-power electrical converters. With switching MOSFET and current detection resistor as external devices, it enables more freedom in design. Since the peak current control is utilized, peak current is... [See More]
- Features: RoHS Compliant
- Input Voltage: 8.5 to 26
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 1
from Utmel Electronic Limited
Display Drivers & Controllers QVGA 512KB RAM megapixel I/F JPEG [See More]
- Features: RoHS Compliant
- Package Type: 180-TFBGA
from Microchip Technology, Inc.
The MIC3230/1/2 are constant current boost switching controllers specifically designed to power one or more strings of high power LEDs. The MIC3230/1/2 have an input voltage range from 6V to 45V and are ideal for a variety of solid state lighting applications. The MIC3230/1/2 utilizes an external... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 45
from LCSC Electronics Technology (HK) Limited
DIP-24 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD81A74EFV-M / BD81A74MUV-M (VQFN28SV5050 package) is a white LED driver with the capability of withstanding high input voltage (maximum 35V). This driver has 4ch constant-current drivers in 1-chip, where each channel can draw up to 120mA (Max), and it is suitable for high illumination LED drive. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 35
from ROHM Semiconductor USA, LLC
The multi-level brightness control LED works as a constant current driver in 64 steps, so that the driving current can be adjusted finely. BD1754HFN is best suited to turn on LEDs that require high-accuracy LED brightness control. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from Utmel Electronic Limited
Display Drivers & Controllers USB to LCDC Contrlr [See More]
- Features: RoHS Compliant
- Package Type: 144-LQFP
from Microchip Technology, Inc.
The MIC3230/1/2 are constant current boost switching controllers specifically designed to power one or more strings of high power LEDs. The MIC3230/1/2 have an input voltage range from 6V to 45V and are ideal for a variety of solid state lighting applications. The MIC3230/1/2 utilizes an external... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 6 to 45
from LCSC Electronics Technology (HK) Limited
SSOP-24 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD81A74MUV-M / BD81A74EFV-M (HTSSOP-B28 package) is a white LED driver with the capability of withstanding high input voltage (maximum 35V). This driver has 4ch constant-current drivers in 1-chip, where each channel can draw up to 120mA (Max), and it is suitable for high illumination LED drive. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 35
from ROHM Semiconductor USA, LLC
BD18351EFV-M is an LED driver with built-in 1ch boost controller. It is an optimal IC for LED drive for head lamp/DRL, tail lamp and turn lamp capable of realizing boost and buck boost with high-side detection of LED current setting against output voltage. Further, cost saving and downsizing of the... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 65
from Utmel Electronic Limited
EVAL BRD LED DRIVER W/SWITCH [See More]
- Features: RoHS Compliant
- Output Current: 1000
from Microchip Technology, Inc.
CL2 is a high voltage, temperature compensated, constant current source. The device is trimmed to provide a constant current of 20mA ±10% at an input voltage of 5.0 - 90V. The device can be used as a two terminal constant current source or constant current sink. A typical application for the... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5 to 90
from LCSC Electronics Technology (HK) Limited
QFN-24-EP(4x4) LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
BD81A24MUF-M is a white LED driver with the capability of withstanding high input voltage (35V Max). This driver has 4ch constant-current drivers integrated in 1-chip, where each channel can draw up to 120mA (Max), which is also suitable for high illumination LED drive. Furthermore, a buck-boost... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 35
from ROHM Semiconductor USA, LLC
BD65B60 is a white LED driver IC that integrates PWM step-up DC/DC converter with boost-capability of up to maximum 28.5V and current driver with drive capability of up to 25mA(Typ.) maximum setting. Precise brightness can be controlled at wide ranges through the external PWM pulse input. This IC... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from Utmel Electronic Limited
EXAR SP6683ER-L LED DRIVER HI POWER, 6683, DFN-10 [See More]
- Features: RoHS Compliant
- Output Voltage: 0.3000 to 5.5
- Input Voltage: -0.3000 to 6
- Output Current: 200
from Microchip Technology, Inc.
CL220 is a high voltage, temperature-compensated, 20mA constant current regulator. The device operates at up to 220V, and is accurate to ±10% over a 5.0 - 160V range. The device can be used as a two terminal constant current source or constant current sink. A typical application for the CL220... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5 to 220
from LCSC Electronics Technology (HK) Limited
SSOP-24 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The multi-level brightness control white LED driver not only ensures efficient boost by automatically changing the boost rate but also works as a constant current driver in 64 steps, so that the driving current can be adjusted finely. BD2606MVV is best suited to turn on white LEDs that require... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 2.7 to 5.5
from ROHM Semiconductor USA, LLC
BD9271KUT is a white LED diver used on backlight of Medium/Large-sized LCDs. This IC can achieve dimming function by SPI control. And through the SPI correspondence, it can set the ON/OFF of each switch, analog dimming and etc. The signals of PWM dimming can set the frequency, ON time and delay of... [See More]
- Features: RoHS Compliant
- Input Voltage: 9 to 35
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 16
from Utmel Electronic Limited
Headers & Wire Housings B/A REELED DRST HDR ASSY LF [See More]
- Features: RoHS Compliant
from Microchip Technology, Inc.
CL25 is a high voltage, temperature compensated, constant current source. The device is trimmed to provide a constant current of 25mA ±10% at an input voltage of 5.0 - 90V. No external components are required. The device can be used as a two terminal constant current source or constant current... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5 to 90
from LCSC Electronics Technology (HK) Limited
SSOP-24L LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The BD18364EFV-M is a buck-boost LED driver with built-in 8ch By-pass switch. Sequential winker and animation lamp light circuits are made possible in this circuit. The By-pass switch can be controlled ON and OFF individually by micro-controller communication. In By-pass switch control, generating... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 5.5 to 45
from ROHM Semiconductor USA, LLC
BD9415FS is a high efficiency driver for white LEDs and designed for large LCDs. This IC has a built-in boost DC/DC converter that employs an array of LEDs as the light source. BD9415FS has various protection functions against fault conditions, such as over-voltage protection (OVP), over current... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 11.5 to 35
from Utmel Electronic Limited
HIGH VOLTAGE LED DRIVER [See More]
- Features: RoHS Compliant
- Package Type: 10-SOP (0.154, 3.90mm Width)
from Microchip Technology, Inc.
The MIC5400 consists of two banks of 8 LED driver outputs, each output capable of sinking up to 30mA. Each bank is intended to drive 8 LED pixels of the same color. Most applications will use the MIC5400 to drive pixel clusters of 4 LEDs [RRGB] Typically two red LEDs are used for every one green and... [See More]
- Features: RoHS Compliant
- Input Voltage: 4.75 to 5.5
- Form Factor: Intgrated Circuit (IC)
- Package Type: SOIC
from LCSC Electronics Technology (HK) Limited
DIP-16 LED Display Drivers ROHS [See More]
- Features: RoHS Compliant
from ROHM Semiconductor GmbH
The BD8388FV-M is a serial-in parallel-out controlled LED driver with 40 V output voltage rating. With the input of 3-line serial data, it turns the 8ch open drain output on/off. Due to its compact size, it is optimal for small space. [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 3 to 5.5
from ROHM Semiconductor USA, LLC
BD9479FV is a high efficiency driver for white LEDsand designed for large LCDs. This IC is built-in a boostDCDC converters that employ an array of LEDs as thelight source. BD9479FV has some protect functionagainst fault conditions, such as the over-voltageprotection (OVP), the over current limit... [See More]
- Features: RoHS Compliant
- Input Voltage: 9 to 35
- Form Factor: Intgrated Circuit (IC)
- Number of Channels: 8
from Utmel Electronic Limited
IC 2CH 10S2P WLED DRVR 9WLCSP [See More]
- Features: RoHS Compliant
- Package Type: 9-UFBGA, WLCSP
- Form Factor: Intgrated Circuit (IC)
from Microchip Technology, Inc.
The MIC3205 is a hysteretic, step-down, high-brightness LED (HB LED) driver with a patent pending frequency regulation scheme that maintains a constant operating frequency over input voltage range. It provides an ideal solution for interior/exterior lighting, architectural and ambient lighting, LED... [See More]
- Features: RoHS Compliant
- Type: Dimmable
- Form Factor: Intgrated Circuit (IC)
- Input Voltage: 4.5 to 40