DIN Rail DC Motor Drives
from ElectroCraft
This four-quadrant brushless DC servo amplifier is fully enclosed in a rugged aluminum case which can be panel mounted or DIN-rail mounted for easy integration. The drive can be configured in a variety of torque and speed control modes with the mode of operation being set by simple jumpers. Both the... [See More]
- Configuration: Panel Mount; DIN Rail
- Axes: 1.0
- Product: Amplifier
- Motor / System: DC Brushless
from DigiKey
Stepper, Bipolar 24VDC Supply 1.5A Load [See More]
- Configuration: DIN Rail
- Continuous Current: 1.5
- DC Input: 24
- Operating Temperature: 0 to 55
from ElectroCraft
DA43 Drives. Technology: PMDC Servo-Linear. Quadrants: 4. Nominal Current: 3A. For Brush-Commutated Linear PMDC Motors. Up to 75 W. This servo-amplifier is built into a fully enclosed rugged aluminum case. Mode of operation is set by simple DIP switches. This drive handles a wide range of power... [See More]
- Configuration: Panel Mount; DIN Rail
- Axes: 1.0
- Product: Speed Controller; Amplifier
- DC Input: 70
from DigiKey
Stepper, Bipolar 24VDC Supply 7.5A 55VDC Load [See More]
- Configuration: DIN Rail
- Continuous Current: 7.5
- DC Input: 24
- Operating Temperature: 0 to 55
from ElectroCraft
EA25 Drives. Technology: Brushless, Speed/Torque Control. Quadrants: 2. Nominal Current: 6A. For BLDC Motors. Up to 300W. This two-quadrant brushless DC speed control is fully enclosed in an extremely small rugged aluminum case which can be DIN-rail mounted or panel mounted for easy integration. The... [See More]
- Configuration: Panel Mount; DIN Rail
- Axes: 1.0
- Product: Amplifier
- Motor / System: DC Brushless
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.1600
from ElectroCraft
SCA-L Drives. Technology: PMDC Servo Amplifier. Quadrants: 4. Nominal Current: 3A. For Brush-Commutated PMDC Motors. Up to 75 W. This linear four-quadrant PMDC DC servo amplifier is fully enclosed in a rugged aluminum case which can be panel mounted for easy integration. The drive is available in... [See More]
- Configuration: Panel Mount; DIN Rail
- Axes: 1.0
- Product: Speed Controller; Amplifier
- DC Input: 30
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.2000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.1600
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.6000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 15.5
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.1600
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.2000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.1600
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- DC Input: 24
- Continuous Current: 0.6000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 690
- AC Input: 240
- Continuous Current: 15.5
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 2
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Motor Starter, Reversible 24VDC Supply 0.5A 500V Load [See More]
- Configuration: DIN Rail
- Voltage: 500
- DC Input: 24
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 2
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from DigiKey
Supply Load [See More]
- Configuration: DIN Rail
- Voltage: 48 to 500
- DC Input: 19 to 30
- Continuous Current: 0.5000
from Galil
The AMP-205x0 contains four transconductance, PWM amplifiers for driving brushless or brush-type servo motors. [See More]
- Configuration: PC Board; OEM; Panel Mount; DIN Rail
- Axes: 2.0
- Product: Controller / Drive (optional feature); Multi-Axis; Amplifier; Regenerative; Pulse Width Modulation Drive; MCU
- Motor / System: DC Brushed; DC Brushless; DC Servo; Linear; Current Loop, Digital Diagnostics
from Dart Controls, Inc.
A compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes Dart's Micro-Drive the ultimate value in accuracy and control. [See More]
- Configuration: Panel Mount; DIN Rail; Other; 1/8 DIN Housing
- Axes: 1.0
- Product: Speed Controller; Variable Speed
- Motor / System: DC Brushed
from Iris Dynamics Ltd.
The IO SmartHub is companion product that provides control and both analog and digital feedback for ORCA ™ Series motors. This compact, DIN rail mountable device connects directly to ORCA Series motors via the RJ45 terminated data cable and integrates easily with industrial control systems... [See More]
- Configuration: DIN Rail
- DC Input: 0 to 10
- Motor / System: DC Brushless
- Continuous Current: 0.0040 to 0.0200
from Galil
The CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and up... [See More]
- Configuration: PC Board; OEM; Stand Alone; Panel Mount; DIN Rail
- Resolution: 32
- Product: Controller / Drive; PC-Based; Amplifier; Pulse Width Modulation Drive; MCU
- Axes: 1.0
from Galil
The DMC-22x0 stand-alone motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-22x0 features 10Base-T/100Base-T Ethernet connectivity. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for... [See More]
- Configuration: PC Board; OEM; Stand Alone; Panel Mount; DIN Rail
- Resolution: 32
- Product: Controller / Drive (optional feature); Multi-Axis; PC-Based; Amplifier; Regenerative; Pulse Width Modulation Drive; MCU
- Axes: 2.0
from Galil
Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four... [See More]
- Configuration: PC Board; OEM; Stand Alone; Panel Mount; DIN Rail
- Resolution: 32
- Product: Controller / Drive (optional feature); Multi-Axis; Amplifier; Regenerative; Pulse Width Modulation Drive; MCU
- Axes: 2.0 to 4.0