14.5° Rack and Pinion Gears
from Stock Drive Products & Sterling Instrument - SDP/SI
The material of pinion wire is dragged through the dies; it is referred to as "drawn" steel, a process that begins with melting several metals together, typically iron plus an additional metal type that is a crucial part of the alloy (smelting). After being slightly cooled, the metal is then coated... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 10
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 40
- Gear Type: Rack
- PD: 0.62
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 14.5°
- Face Width: 0.31
- Gear Type: Rack
- PD: 16
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 12
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 14.5°
- Face Width: 32
- Gear Type: Rack
- Overall Width: 46
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 40
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 10
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 14.5°
- OD: 0.5830
- Gear Type: Rack
- Face Width: 0.81
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 144
- Gear Type: Rack
- Face Width: 0.25
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 40
from Boston Gear
Overview. Boston Gear's stem pinions feature small numbers of teeth that are cut integral to the steel shaft. Using a special, enlarged pitch diameter minimizes the undercutting of the teeth. When run with standard stock spur gears, stem pinions increase the ratios normally found in spur gear... [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 5 to 10
- Gear Type: Pinion
- Design: English
from Martin Sprocket & Gear, Inc.
Machined gear rack, standard face width, 14 pressure angle [See More]
- Pressure Angle: 14.5°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from Martin Sprocket & Gear, Inc.
Martin manufactures spur gears and gear rack, bevel gears, miter gears and worm gears. With a vast inventory of raw materials, modern machine tool capacity, and a pro-service attitude, Martin makes short work of a quick delivery on all specialty gears. [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 11
- Gear Type: Pinion (optional feature)
- Design: English
from Martin Sprocket & Gear, Inc.
Steel spur gears 3DP, 14.5 pressure angle, without hubs [See More]
- Pressure Angle: 14.5°
- Number of Teeth: 11
- Gear Type: Pinion (optional feature)
- Design: English