20° Rack and Pinion Gears
from KHK USA, Inc.
Cut continuously. Long length and bendable to a contour. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Material: Steel; SS400 Carbon Steel
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Face Width: 12
- Gear Type: Rack
- Overall Width: 65
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Features: Rack/Rail
from KHK USA, Inc.
Increased strength with SCM440 material which is thermal refined. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Pressure Angle: 20°
- Number of Teeth: 10
- Gear Type: Rack; Pinion
- Design: Metric
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Number of Teeth: 20 to 424
- Gear Type: Rack
- Design: Metric
from KHK USA, Inc.
This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Rack
- PD: 50
from KHK USA, Inc.
High strength and abrasion-resistant for precision linear motion. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Face Width: 3
- Gear Type: Rack
- Material: Stainless; Stainless Steel
from KHK USA, Inc.
Heat treated ground gears with high precision and strength has excellent cost-performance ratio. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. Helical gears are comparable to spur gears, but due to the higher contact ratio, they are quieter, vibrate less, and experience less friction. Helical gear pairs have the same helix angle but opposite threads (left-hand and right-hand). Helical gears... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- OD: 36
from KHK USA, Inc.
Thermal refined and tooth-hardened chromolyracks, excellent in abrasion resistance. Use as mating pinions for KRCPF(-H) Racks. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 2.51
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Face Width: 0.23
- Gear Type: Rack
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.25
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 30
- PD: 1.88
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 25
- PD: 3.13
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Tooth Form: Straight
from KHK USA, Inc.
By pairing with STRCPF rack, the backlash may be adjusted. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 2.51
from Stock Drive Products & Sterling Instrument - SDP/SI
The material of pinion wire is dragged through the dies; it is referred to as "drawn" steel, a process that begins with melting several metals together, typically iron plus an additional metal type that is a crucial part of the alloy (smelting). After being slightly cooled, the metal is then coated... [See More]
- Pressure Angle: 20°
- Number of Teeth: 10
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Has the highest strength and precision in the KHK standard rack series. Bolt holes can be remachined as carburizing is applied only within the tooth area. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 50
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 0.83
from KHK USA, Inc.
Designed with positive partial transposition and to have an integral value (mm) for the mounting distance, so both strength and usability are enhanced. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 2.51
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Widely applicable due to low cost and large selection of pitches and lengths. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Material: Steel; S45C (AISI 1045) Carbon Steel
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Stable Hardened racks with high strength, long life span are reasonably priced. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Material: Steel; S45C (AISI 1045) Carbon Steel
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Reasonably priced ground racks with abrasion-resistant characteristics. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Material: Steel; S45C (AISI 1045) Carbon Steel
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Convenient in applications where the rack has reciprocal motion. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- OD: 1.18
- Design: Metric
- OD: 30
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Rack; Pinion
- Design: English
from KHK USA, Inc.
Low cost and widely applicable, with a large selection of pitches and numbers of teeth. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 30
- PD: 5.64
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Face Width: 0.17
- Gear Type: Rack
- PD: 120
from KHK USA, Inc.
Perform secondary operations to suit your requirement on these ground CP spur gears. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Shaft Diameter: 0.1247
- Gear Type: Rack
- PD: 120
from KHK USA, Inc.
Ground Spur Gears with Pinions, can be directly assembled with the shaft bearing, by modifying the pinion. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 10
- PD: 1.25
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
By pairing with KTSCP pinion, the backlash may be adjusted. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Material: Steel; S45C (AISI 1045) Carbon Steel
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 9. 1/4 & 3/8 FACE. 3/8 & 1/2 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gear - Cast Nylon 12 (PA12G). Knurled Core - 303 Stainless Steel. FEATURES: Self-lubricating. Quiet operation. Precision hobbed & machined. Integral metal core. [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Suitable for food machinery due to SUS304 material ’s rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Material: Steel; Stainless; SUS304 (AISI 304) Stainless Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Pressure Angle: 20°
- Number of Teeth: 16
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Suitable for food machinery due to SUS303 material\'s rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 2.51
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 16
- Gear Type: Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 10
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 20
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- OD: 0.5830
- Gear Type: Rack
- Face Width: 0.81
from Schneeberger Inc.
Helical-toothed gear racks are available in typical industry dimensions from module 2 to module 12. The material, hardness, and accuracy determine the respective load. [See More]
- Pressure Angle: 20°
- Number of Teeth: 7 to 300
- Gear Type: Rack
- Design: Metric
from Martin Sprocket & Gear, Inc.
Machined gear rack, wide face width, 20 pressure angle [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from Shenzhen Besta Precision Machinery Co., Ltd.
Rack and pinion is utilized to convert rotational motion to linear motion. A rack is straight teeth cut into one surface of rectangular or cylindrical rod shaped material, and a pinion is a small cylindrical gear meshing with the rack. There are many ways to categorize gears. If the relative... [See More]
- Pressure Angle: 20°
- Number of Teeth: 30 to 300
- Gear Type: Rack; Pinion
- Design: Metric
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 25
- Gear Type: Pinion
- Design: Metric
from QTC METRIC GEARS
Module 1 - 100mm Ground Alloy Steel Left Handed Helical Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 8
from Schneeberger Inc.
Straight-toothed gear racks are available in standard industrial sizes from module 2 to module 12. The material, hardness, and accuracy determine the respective load. [See More]
- Pressure Angle: 20°
- Number of Teeth: 7 to 320
- Gear Type: Rack
- Design: Metric
from Martin Sprocket & Gear, Inc.
Martin manufactures spur gears and gear rack, bevel gears, miter gears and worm gears. With a vast inventory of raw materials, modern machine tool capacity, and a pro-service attitude, Martin makes short work of a quick delivery on all specialty gears. [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Pinion (optional feature)
- Design: English
from ATLANTA Drive Systems, Inc.
We have recently expanded our range of ISO 9409-1-A flanged pinions. This allows the machine designer the flexibility of choosing the best flanged pinion to meet the application needs. The new TR flanged pinions have compact designs to reduce the amount of drive torque required. Traditionally,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Pinion
- Design: Metric
from QTC METRIC GEARS
Module 0.5, 300mm Brass Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 3
from Martin Sprocket & Gear, Inc.
Cast iron spur gears, 20 pressure angle, 10DP, with hubs [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Pinion (optional feature)
- Design: English
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 30
- Gear Type: Pinion
- Design: Metric
from QTC METRIC GEARS
Module 1.5, 1000mm, Polyacetal Gear Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 15
from QTC METRIC GEARS
Module 1.5, 1000mm, Polyacetal Gear Rack with Mounting Holes [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 15
from QTC METRIC GEARS
Module 1, 500mm Mild Steel Round Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Material: Steel
from QTC METRIC GEARS
Circular Pitch 10 - 10 Tooth Ground Steel Pinion Shaft [See More]
- Pressure Angle: 20°
- Number of Teeth: 10
- Gear Type: Pinion
- Design: Metric