Stainless Steel Rack and Pinion Gears
from KHK USA, Inc.
Suitable for food machinery due to SUS304 material ’s rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; Stainless; SUS304 (AISI 304) Stainless Steel
- Design: Metric
- Number of Teeth: 100
- Pressure Angle: 20°; 20 º
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Stainless; Stainless Steel
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 3
from KHK USA, Inc.
Suitable for food machinery due to SUS303 material\'s rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; Stainless; SUS303 (AISI 303) Stainless Steel
- Design: Metric
- Number of Teeth: 20
- Pressure Angle: 20°; 20 º
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Material: Stainless; Stainless Steel / ISO
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 17
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Stainless; Stainless Steel (Set)
- Design: English
- Gear Type: Rack
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Material: Aluminum; Stainless; Aluminum Body / Stainless Steel Hub
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Material: Stainless; Acetal; Acetal, Stainless Hub
- Number of Teeth: 15
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Material: Aluminum; Stainless; Stainless Steel & Aluminum Set
- Number of Teeth: 24
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 20
- Gear Type: Rack
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. Helical gears are comparable to spur gears, but due to the higher contact ratio, they are quieter, vibrate less, and experience less friction. Helical gear pairs have the same helix angle but opposite threads (left-hand and right-hand). Helical gears... [See More]
- Material: Stainless; AGMA Q10 / Stainless
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Stainless; Stainless Steel Set
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 0.18
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Material: Stainless; Stainless / AGMA Q10
- Pressure Angle: 14.5°
- Gear Type: Rack
- OD: 0.3750
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 25
- Gear Type: Rack
- OD: 0.5625
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 25
- Gear Type: Rack
- OD: 0.5625
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Stainless; 304 Stainless Steel
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 15
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Stainless; 304 Stainless Steel
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 30
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 20
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 22
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 23
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 24
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 30
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 40
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 25
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 26
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 28
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 30
- Gear Type: Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Material: Stainless; Stainless Steel
- Number of Teeth: 32
- Gear Type: Rack
- Face Width: 0.16
from Ondrives.US Corporation, formerly Rino Mechanical
A gear is a rotating machine part that utilizes cut teeth, or cogs, to mesh with another toothed part —usually another gear or a linear toothed part (called a gear rack) —to transmit rotational motion and torque. By using a combination of precision gears with the correct ratio, the... [See More]
- Material: Aluminum; Stainless
- Design: English
- Gear Type: Rack
- Features: Anti-backlash
from QTC METRIC GEARS
Circular Pitch 5 - 2000mm Flexible Stainless Steel Rack [See More]
- Material: Stainless
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Material: Stainless
- Number of Teeth: 12
- Gear Type: Pinion
- Design: Metric
from QTC METRIC GEARS
Circular Pitch 10 - 1000mm Stainless Steel Rack with Finished Ends [See More]
- Material: Stainless
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from QTC METRIC GEARS
Circular Pitch 10 - 1000mm Stainless Steel Rack with Mounting Holes [See More]
- Material: Stainless
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from QTC METRIC GEARS
Module 1, 500mm Stainless Steel Round Rack [See More]
- Material: Stainless
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°