Rack Rack and Pinion Gears
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Gear Type: Rack
- Face Width: 12
- Pressure Angle: 20°
- Overall Width: 65
from Chengdu Leno Machinery Co., Ltd.
Giving the Mechanical Power Transmission field innovation and perfect solution with low cost. [See More]
- Gear Type: Rack
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Gear Type: Rack
- Features: Rack/Rail
- Design: English
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Gear Type: Rack; Pinion
- Design: Metric
- Number of Teeth: 10
- Pressure Angle: 20°
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Gear Type: Rack
- Design: Metric
- Number of Teeth: 20 to 424
- Features: Rack/Rail
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Number of Teeth: 100
- PD: 50
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Gear Type: Rack
- Face Width: 3
- Pressure Angle: 20°
- Material: Stainless; Stainless Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. Helical gears are comparable to spur gears, but due to the higher contact ratio, they are quieter, vibrate less, and experience less friction. Helical gear pairs have the same helix angle but opposite threads (left-hand and right-hand). Helical gears... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Number of Teeth: 20
- OD: 36
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Gear Type: Rack
- Face Width: 0.23
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: English
- Tooth Form: Straight
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: English
- Tooth Form: Straight
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: Metric
- Tooth Form: Straight
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Gear Type: Rack
- Tooth Form: Helical
- Design: Metric
- PD: 40
from Stock Drive Products & Sterling Instrument - SDP/SI
The material of pinion wire is dragged through the dies; it is referred to as "drawn" steel, a process that begins with melting several metals together, typically iron plus an additional metal type that is a crucial part of the alloy (smelting). After being slightly cooled, the metal is then coated... [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 10
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Number of Teeth: 20
- PD: 0.83
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 100
- Features: Anti-backlash
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 100
- Pressure Angle: 14.5°
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 100
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 12
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Gear Type: Rack; Pinion
- Design: English
- Number of Teeth: 12
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Gear Type: Rack
- Face Width: 0.17
- Pressure Angle: 20°
- PD: 120
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Gear Type: Rack
- Shaft Diameter: 0.1247
- Pressure Angle: 20°
- PD: 120
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 100
- Features: Anti-backlash
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 9. 1/4 & 3/8 FACE. 3/8 & 1/2 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gear - Cast Nylon 12 (PA12G). Knurled Core - 303 Stainless Steel. FEATURES: Self-lubricating. Quiet operation. Precision hobbed & machined. Integral metal core. [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 20
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Gear Type: Rack
- Design: English
- Number of Teeth: 12
- Pressure Angle: 14.5°
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Gear Type: Rack
- Design: Metric
- Number of Teeth: 16
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Number of Teeth: 20
- PD: 10
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Number of Teeth: 20
- PD: 20
from Martin Sprocket & Gear, Inc.
Machined gear rack, standard face width, 14 pressure angle [See More]
- Gear Type: Rack
- Pressure Angle: 14.5°
- Design: English
- Tooth Form: Straight
from Shenzhen Besta Precision Machinery Co., Ltd.
Rack and pinion is utilized to convert rotational motion to linear motion. A rack is straight teeth cut into one surface of rectangular or cylindrical rod shaped material, and a pinion is a small cylindrical gear meshing with the rack. There are many ways to categorize gears. If the relative... [See More]
- Gear Type: Rack; Pinion
- Design: Metric
- Number of Teeth: 30 to 300
- Features: Rack/Rail
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Gear Type: Rack
- Material: Brass
from IBT Industrial Solutions
IBT Industrial Solutions is a leading distributor of gearing for a range of applications. IBT ’s gearboxes provide the speed and torque to keep your operation up and running. Plus, with our wide selection of bearings, we can increase the torque density of your gearbox while decreasing the... [See More]
- Gear Type: Rack
from York Industries, Inc.
York manufactures custom spur gears, helical gears, worms, worm gears, gear racks and sprockets to your specifications in prototype through production quantities. Our pitch capacity ranges from 6 DP to 120 DP, including metric (module) pitches. We work with a variety of materials, including, steel,... [See More]
- Gear Type: Rack
- Material: Aluminum; Brass; Bronze; Steel; Machined Plastic
from Reid Supply
Gearing systems are less intricate and have lesser mating components compared to other linear motion components. This allows gear racks to be able to function over long distances. . GE-0600 [See More]
- Gear Type: Rack
- Pitch: 6
- Design: English
- Face Width: 1.25
from QTC METRIC GEARS
Module 1 - 100mm Ground Alloy Steel Left Handed Helical Rack [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: Metric
- Face Width: 8
from Boston Gear
Overview. Gear rack, when used with spur gears, converts rotary motion into linear motion. Gear rack from Boston Gear is designed to operate with our stock 14 1/2 ° and 20 ° PA spur gears. Our broad in-stock inventory includes nylon, brass, and steel gear rack in 1, 2, 4, and 6-foot lengths. [See More]
- Gear Type: Rack
- Pressure Angle: 14.5° (optional feature); 20° (optional feature)
- Design: English
- Pitch: 64 to 3 DP
from Ondrives.US Corporation, formerly Rino Mechanical
Ondrives.US has been designing, engineering, and manufacturing gears, gearboxes, and other motion transfer components for decades. If none of our standard gear options are right for your application, we can produce custom gears that meet your specifications. We can work from your part prints, or... [See More]
- Gear Type: Rack; Pinion
- Features: Anti-backlash
- Design: English; Metric
from Andantex USA, Inc.
Overview. The Precision Rack and Pinion System is the primary building block of a linear axis drive. This system consists of a standard range of straight (spur), circumferential pitch, and helical racks and pinions. The modular design permits rack segment lengths from 0.5 to 2 meters to be linked... [See More]
- Gear Type: Rack; Pinion
- Tooth Form: Straight
from Schneeberger Inc.
You need a gear rack but standardised dimensions do not fit your system?. No problem. You can have any gear racks up to module 20. The maximum one-piece length is 3000 mm. The customer can choose from different materials and therefore configure the gear rack just as required. [See More]
- Gear Type: Rack
- Features: Ground Teeth (optional feature)
- Design: Metric
- Tooth Form: Straight (optional feature)
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Gear Type: Rack
- Design: Metric
- Number of Teeth: 75
- Features: Anti-backlash (optional feature)
from Davall Gears, an ITW Company
Davall Gears are able to supply specialised curved racks, manufactured on pre-formed curved / bent parts, providing a high accuracy of tooth form over the curved section. We can provide solid one-piece parts, which maintain tight engineering tolerances of linear and/or angular position. [See More]
- Gear Type: Rack
- Material: Aluminum (optional feature); Brass (optional feature); Steel (optional feature); Stainless (optional feature); Nylon (optional feature)
from IBT Industrial Solutions
Mechanical Power Transmission has been a cornerstone of the IBT Industrial Solutions business since the company was founded in 1949. With a wide variety of products from the best power transmission suppliers, IBT Industrial Solutions can put together the right group of products to satisfy your exact... [See More]
- Gear Type: Rack
from QTC METRIC GEARS
Module 0.5, 300mm Brass Rack [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: Metric
- Face Width: 3
from Ondrives.US Corporation, formerly Rino Mechanical
A gear is a rotating machine part that utilizes cut teeth, or cogs, to mesh with another toothed part —usually another gear or a linear toothed part (called a gear rack) —to transmit rotational motion and torque. By using a combination of precision gears with the correct ratio, the... [See More]
- Gear Type: Rack
- Features: Anti-backlash
- Design: English
- Pitch: Range: 1/20 to 120
from Schneeberger Inc.
Helical-toothed gear racks are available in typical industry dimensions from module 2 to module 12. The material, hardness, and accuracy determine the respective load. [See More]
- Gear Type: Rack
- Design: Metric
- Number of Teeth: 7 to 300
- Features: Ground Teeth (optional feature)
from Davall Gears, an ITW Company
Davall Gears manufacture racks with a generated tooth form (not milled) in any shape or material combination, typically in delrin, brass, steel, titanium or stainless steel. We can produce racks with pitch ranging from 0.15mod/200DP upto 8mod/3DP, and circular/linear pitch 0.25mm upto 1"(inch). We... [See More]
- Gear Type: Rack
- Material: Aluminum (optional feature); Brass (optional feature); Steel (optional feature); Stainless (optional feature); Nylon (optional feature)
from QTC METRIC GEARS
Module 1.5, 1000mm, Polyacetal Gear Rack [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: Metric
- Face Width: 15
from Schneeberger Inc.
Straight-toothed gear racks are available in standard industrial sizes from module 2 to module 12. The material, hardness, and accuracy determine the respective load. [See More]
- Gear Type: Rack
- Design: Metric
- Number of Teeth: 7 to 320
- Features: Ground Teeth (optional feature)
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Gear Type: Rack
- Material: Nylon
from QTC METRIC GEARS
Module 1.5, 1000mm, Polyacetal Gear Rack with Mounting Holes [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: Metric
- Face Width: 15
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Gear Type: Rack; Pinion
- Material: Nylon
from QTC METRIC GEARS
Module 1, 500mm Mild Steel Round Rack [See More]
- Gear Type: Rack
- Pressure Angle: 20°
- Design: Metric
- Material: Steel
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Gear Type: Rack
- Material: Steel
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Gear Type: Rack
- Material: Steel