Normally Closed, NC Thermal Switches and Thermal Protectors
from STEGO
The electronic DC hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Maximum DC Voltage: 20 to 56
- Switch Type: Bi-Metal
- Set Point/ Switch Point: Multiple Set Points
from Portage Electric Products, Inc.
PEPI ®-1/2" Disc Type devices offer a number of versatile options to meet specific application requirements. Included are optional contact and mounting configurations as well as special engineering features to enhance performance in particular applications. These snap-action devices, with Quick... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 23 to 374
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 70DEG C SPST-NC WIRE [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 158
- Poles: Single Pole, SP
from Thermon, Inc
The Caloritech ™ 30000 Surface Mounting Thermoswitch® Temperature Control operates on the principle of the differential expansion of metals. Because the case is one of the expanding metals and it is in direct contact with the heated surface, a temperature change is sensed almost... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 300 to 500
- Mounting/Configuration: Surface Mount
from STEGO
Two thermostats in one housing: Tamperproof (Pre-set) Thermostat NC (normally closed): Thermostat opens on temperature rise (red module housing) - for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. Tamperproof (Pre-set) Thermostat NO (normally... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Maximum Current: 16
- Switch Type: Bi-Metal
- Maximum AC Voltage: 120 to 250
from Portage Electric Products, Inc.
Creep-action thermal protector equipped with gold diffused contacts. Can be used in 120 VAC or low voltage/low current applications. Features. Conductive bimetal construction; the bimetallic element carries the circuit current. Creep action device; slow make/slow break switching action. No built-in... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 104 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 70DEG C SPST-NC 2SIP [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 158
- Poles: Single Pole, SP
from STEGO
Tamperproof (Pre-set) Thermostat NC (normally closed): Thermostat opens on temperature rise (red module housing) - for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. Tamperproof (Pre-set) Thermostat NO (normally open): Thermostat closes on... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Maximum Current: 16
- Switch Type: Bi-Metal
- Maximum AC Voltage: 120 to 250
from Portage Electric Products, Inc.
A creep-action thermal protector with a shunted bimetal design which lowers current sensitivity and slows the cycle rate of the device. A good choice for motors and transformers when space is limited. Features. Shunted bimetal construction; the bimetallic element does not carry the circuit current. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 104 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 100DEG C SPST-NC 2SIP [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 212
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A creep action thermal protector in an exceptionally small package. Low internal resistance and gold diffused contacts makes this device suitable for use in low voltage/low current applications. Features. Conductive bimetal construction; the bimetallic element carries the circuit current. Creep... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 86 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 60DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 140
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A creep action thermal protector with greater current sensitivity than the Model N. Equipped with gold diffused contacts for use in low voltage/low current applications. Features. Conductive bimetal construction; the bimetallic element carries the circuit current for maximum current sensitivity... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 86 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 70DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 158
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A Low-cost creep-action thermostat with crimp connections for fast, easy termination. Available in same end (Model A) or opposite (Model AA) configurations. Designed for use on low-current, 120 VAC loads. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 41 to 302
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 75DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 167
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A low-cost creep-action thermostat with crimp connections for fast, easy termination. Available in same end (Model A1) or opposite end (Model AA1) configurations. Designed and approved for use in heating pads and electric blankets. Features. Conductive bimetal construction; the bimetallic element... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 41 to 302
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 85DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 185
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A creep-action thermostat/thermal protector with highest contact rating of all Model A Series thermostats. Available with gold diffused contacts for use in low voltage/low current applications, or with fine silver contacts for 120 VAC applications. Features. Conductive bimetal construction; the... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 41 to 392
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 95DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 203
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A creep-action thermostat/thermal protector with a higher resistive-bimetallic element for increased current sensitivity. Available with gold diffused contacts for use in low voltage/low current applications. Features. Creep action device; slow make/slow break switching action. No built-in... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 104 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 105DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 221
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A creep-action thermostat/thermal protector. Shunted type bimetal design allows for higher contact ratings. Equipped with gold diffused contacts for use in low voltage/low current applications. Features. Shunted bimetal construction; the bimetallic element does not carry the circuit current. Creep... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 41 to 302
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 115DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 240
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
An economical creep-action thermostat for low-current 120 VAC applications. Its opposite-end terminals and low profile allow for various installation options. Approvals include both appliance and heating pad ratings. Features. Conductive bimetal construction; the bimetallic element carries the... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 86 to 194
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 125DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 257
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A creep-action thermostat/thermal protector with a higher resistive-bimetallic element for increased current sensitivity. Available with gold diffused contacts for use in low voltage/low current applications. Features. Creep action device; slow make/slow break switching action. No built-in... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 104 to 302
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 135DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 275
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
Versatile, multipurpose creep action thermostats/ thermal protectors for temperature sensing applications, heaters, motors and more. Available with gold-diffused contacts for exceptionally low contact resistance in critical low-voltage/ low current circuits. Features. Conductive bimetal... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 41 to 392
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 150DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 302
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
PEPI ®-1/2" Disc Type devices offer a number of versatile options to meet specific application requirements. Included are optional contact and mounting configurations as well as special engineering features to enhance performance in particular applications. These snap-action devices, with Quick... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 23 to 392
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 160DEG C SPST-NC RAD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 320
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
Portage Electric is offering a new addition to the Valstat Series ™ of thermal controls. The new series is a line of self-hold thermal protectors designed as a cost effective solution for thermal protection of motor, transformer, lighting, and appliance applications. In a fault condition, the... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 122 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 160DEG C SPST-NC WIRE [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 320
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
These Snap Action Thermostats operate as a high limit, single operation (non-resettable) type control. The ceramic case isolates them from the electrical circuit and allows them to operate at temperatures up to 260 °C. As single operation thermostates they perform like a thermal fuse with the... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 392 to 500
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 150DEG C SPST-NC WIRE [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 302
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
These snap action single operation thermal protectors operate as a high limit, single operation (non-resettable) type control. Ultra fast thermal repsonse due to the unique position of the bimetal element. As single operation thermostats, they perform like a thermal fuse with the reliability of a... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 266 to 446
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 150DEG C SPST-NC WIRE [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 302
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A snap action thermostat that functions like a non-resettable type control. This single operation thermostat performs like a thermal fuse with the reliability of a 100% tested bimetallic thermal control. Features. Conductive bimetal construction; the bimetallic element carries the circuit current... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 320
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 100DEG C SPST-NC AXL [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 212
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A Snap Action Thermal Protector specifically designed for DC voltage applications. This miniature device operates as a high limit single operation (non-resettable) type control. Has the functionality of a thermal fuse but can be tested for operation to insure proper function. Features. Snap action... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 320 to 428
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 100DEG C SPST-NC MOD [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 212
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A snap-action thermal control which is part of Portage Electric ’s Valstat Series ™ designed as a cost effective solution for protection in motor, transformer, and lighting applications. Available with various bimetallic elements to match the current sensitivity of the device to the... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 0DEG C SPST-NC AXIAL [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 4.5
- High Temperature Set Point: 32
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A small, versatile snap-action thermal protector used mainly in motor, transformer, and lighting applications with 120, 240, or 277 VAC loads. Available with various bimetallic elements to match the circuit-breaker characteristics of the device to the application. Features. Conductive bimetal... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 302
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 50DEG C NC TO205AA [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 122
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
These Snap Action thermal protectors operate as a high limit, single operation (non-resettable) type control. The ceramic case isolates allows them to operate at temperatures up to 280 °C. As single operation thermostates they perform like a thermal fuse with the reliability of a 100% tested... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 320 to 536
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 60DEG C NC TO205AA [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 140
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
These snap action thermal protectors offer exceptional performance in an extremely small package. Designed as an economical solution, especially for motor, transformer, and lighting applications up to 5 amps, 250 VAC. The round, low-profile design fits perfectly for on-winding protection. Available... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 320
- Throws: Single Throw, ST
from DigiKey
THERMOSTAT 65DEG C NC TO205AA [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 149
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A snap-action thermostat specially designed for 120 and 240 VAC appliance and other heated applications. Available with either a wide or narrow differential between opening and closing temperatures for tighter temperature control. Features. Snap-action device; quick make/quick break switching... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 302
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 70DEG C NC TO205AA [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 158
- Poles: Single Pole, SP
from Portage Electric Products, Inc.
A snap-action thermostat/thermal protector with the highest contact ratings of any of our controls. Suitable for use on 120/240 VAC loads. Available with variety of bi-metallic elements to enhance performance characteristics. Features. Conductive bimetal construction; the bimetallic element carries... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 194 to 302
- Poles: Single Pole, SP
from DigiKey
THERMOSTAT 85DEG C NC TO205AA [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 9
- High Temperature Set Point: 185
- Poles: Single Pole, SP
from KOBOLD Instruments, Inc.
Product Features. Measuring Range -58 to 250 °F. User Adjustable Switchpoint(s). Large Easy-to-Read LED Display. All Stainless Steel Construction. Rugged and Reliable. Remote Sensor Version Available. The TDD series digital temperature switch integrates the latest solid state sensing technology... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Maximum Current: 0.3000
- High Temperature Set Point: 0 to 250
from Thermtrol
Thermtrol offers The Klixon ® line of 1NT fixed temperature thermostats. Approved by numerous testing agencies, all 1NT thermostats pass a series of rigorous quality control checks including continuity, function, contact resistance and dielectric strength. Excellent multipurpose thermostat... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC; Open on Temperature Rise; Close on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 399
- Maximum Current: 0.0500 to 1
from Barksdale Control Products
ML1S Series temperature switches are economic, bi-metallic, factory pre-set temperature switches that complement both our new and traditional temperature switch lines. The ML1S features a one-piece, brass thermowell design, which houses a bi-metallic, SPST snap switch. This one piece, brass housing... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 50 to 200
- Poles: Single Pole, SP
from Gems Sensors & Controls
70 °F to 285 °F (20 °C to 140 °C). Withstands Acceleration to 8G. Small Capillary for harsh applications. Gems ™ PDTF Series temperature switch is a factory set sensor for the protection of all types of internal combustion engines, pumps, compressors, gear boxes, hydraulic... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Repeatability / Tolerance: -6 to 6
- High Temperature Set Point: 70 to 285
- Switch Type: Other
from NOSHOK, Inc.
The NOSHOK 850 Temperature Switch measures and displays temperature and has one or two switching outputs as well as an optional analog output. The temperature set points, reset points, switching functions and the measuring range of the optional analog output are simple to adjust via two buttons. All... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Other
- High Temperature Set Point: -300 to 1100
- Maximum Current: 0.1000
from Thermik Corporation
Normally closed. Resets automatically. Without cables. Without insulation. For clip contact. Minimum batch sizes. The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and acontact cap which is made of steel (2) and insulated... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 40
from OMEGA Engineering, Inc.
Hazardous Locations Application. Compact Design. DIN Rail Mountable. The design of the thermostat ensures high accuracy, small switching difference (hysteresis) and a long service life. Because of the high switching capacity of the thermostat, heaters can usually be directly connected and switched,... [See More]
- Switch Type: Normally Closed, NC
- Maximum Current: 10
- Switch Type: Bi-Metal
- Maximum AC Voltage: 250
from Canadian Thermostats & Control Devices LTD.
These thermostats are specifically designed for electrical appliances, such as hair dryers, hairdressing equipment, cooking equipment, air heaters. These are factory calibrated bimetals to snap open at a predetermined temperature. Reset is preceeded by significant cooling. Applications. Household... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Repeatability / Tolerance: 9
- High Temperature Set Point: 158 to 320
- Switch Type: Bi-Metal
from Saftty Electronic Technology Co., Limited
Power class: 6A. Type series: BW-B. Features. normally closed. resets automatically. with connector cables. ceramic insulation. Main parts. 1) Shell 2) Iron bracket 3) bimetal disc. 4) movable contact 5) Base 6) stationary silver contact. Construction. The movable contact are welded to the bimetal... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 6
from Hengxin Precision Electrical Equipment Co., Ltd.
10A Overheating Protector. Features and Benefit. HXPEE offers product that meets the recognitions from home and abroad. The action temperature of each TP1 thermal protector is strictly checked that the bimetal are able to act quickly. We have adopted advanced technology to keep capability. Each... [See More]
- Switch Type: Normally Closed, NC
- Repeatability / Tolerance: 27
- High Temperature Set Point: 140 to 392
- Switch Type: Bi-Metal
from KOBOLD Instruments, Inc.
Product Features. Simple Installation. Position Independent. Ni-Plated Brass or SS Construction. Optional Signal Lamp. Maximum Temperature 248 °F. KOBOLD's TWR temperature switch is used to provide thermally triggered switching functions for liquids in pipe systems and tanks. Individually it can... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Hysteresis/ Differential: 36
from Thermtrol
Thermtrol ’s TC100 Series is designed specifically for over temperature and short circuit protection in battery pack applications. The TC100 functions by detecting elevated heat and over-current in the battery pack and breaks the electrical circuit at the TC100 ’s pre-selected... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 113 to 248
- Maximum Current: 0.0100 to 100
from Barksdale Control Products
Barksdale's explosion proof compact temperature switches are ideal for hazardous location and heavy industrial applications where space is a premium and the customer needs a compact and rugged design, UL and CSA Class 1 Div 1, and ATEX approvals, and easy set point adjustment. Paired with the 9681X... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Gas-Actuated / Vapor-Tension (Bulb & Capillary) (Flexible Capillary (optional feature))
- High Temperature Set Point: -10 to 330
- Poles: Single Pole, SP
from Thermik Corporation
The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a contact cap which is made of steel (2) and insulated from it, plus an integrated stationary silver contact (6) which closes the housing like a button cell. At the... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 302
- Maximum Current: 15
from OMEGA Engineering, Inc.
The CCD Temperature Controller is used as a remote control thermostat for individual circuits requiring a weatherproof device. The OMEGALUX CCD100N SPST Thermostat uses a temperature-sensitive bi-metal disc in an epoxy-sealed housing. Upon reaching the non-adjustable calibrated setpoint, the disc... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Repeatability / Tolerance: 5
- High Temperature Set Point: 35 to 200
- Switch Type: Bi-Metal
from Saftty Electronic Technology Co., Limited
Power class: 6A. Type series: BW-B. Features. normally closed. resets automatically. with connector cables. blue epoxy resin insulation. Main parts. 1) Shell 2) Iron bracket 3) bimetal disc. 4) movable contact 5) Base 6) stationary silver contact. Construction. The movable contact are welded to the... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 6
from Hengxin Precision Electrical Equipment Co., Ltd.
TP2 Series Thermal Protector. Using scope : Applies to the fractional horsepower motor, fluorescent ballasts, motor of washer motor of air conditioner, transformers, lighting lamps, DC motor of automobile battery changer, household electric appliances, OA-machines etc. Best seller point : *Miniature... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 113 to 284
- Maximum Current: 6 to 12
from Thermtrol
Thermtrol offers the GT line of 1/2 ” disc fixed temperature thermostats. Approved by numerous testing agencies, all GT thermostats pass a series of rigorous quality control checks including continuity, function, contact resistance and dielectric strength. Excellent multipurpose thermostat... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC; Open on Temperature Rise; Close on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 301 to 446
- Maximum Current: 10 to 15
from Barksdale Control Products
Barksdale's BLS-810 family of level switches offers both level and temperature control in one compact unit. With brass stems and Buna-N floats, these dual function switches are compatible with a broad range of media, including most hydraulic oils. All units are shipped with 100 VA limit switches as... [See More]
- Switch Type: Normally Closed, NC
- Poles: Single Pole, SP
- High Temperature Set Point: 122 to 194
- Throws: Single Throw, ST
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With epoxy. Ryton ® cap. The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and acontact cap which is made of steel (2) and insulated from it, plus an... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 6A. Type series: BW-B. Features. normally closed. resets automatically. with connector cables. transparent PET cap insulation. Main parts. 1) Shell 2) Iron bracket 3) bimetal disc. 4) movable contact 5) Base 6) stationary silver contact. Construction. The movable contact are welded to... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 6
from Thermtrol
Immersion thermostats are thermally sensitive bi-metallic switches housed in a rugged brass or stainless steel case. The switches are manufactured to either make or break an electrical circuit at a factory pre-set temperature and they reset automatically on cooling. Some devices are ideally suited... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC; Open on Temperature Rise; Close on Temperature Rise
- Repeatability / Tolerance: 10.8 to 18
- High Temperature Set Point: 338 to 464
- Switch Type: Bi-Metal
from Barksdale Control Products
The BTS3000, an electronic temperature switch with a 4-digit display. The BTS3000 is part of Barksdale's new Generation 3000 Series of electronic products with sensor technology for Pressure, Temperature, Level and Flow. [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Mounting/Configuration: Probe Configuration
- High Temperature Set Point: -22 to 284
- Weight: 6.4
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With epoxy. Ryton ® cap. Switchgear consisting of a mobile and circular contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one another, undetachable and fixed in a... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 6A. Type series: BW-B. Features. normally closed. resets automatically. with connector cables. plastic shell insulation. Main parts. 1) Shell 2) Iron bracket 3) bimetal disc. 4) movable contact 5) Base 6) stationary silver contact. Construction. The movable contact are welded to the... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 6
from Thermtrol
Thermtrol offers the GT20 line of 1/2 ” disc fixed temperature thermostats. Approved by numerous testing agencies, all GT thermostats pass a series of rigorous quality control checks including continuity, function, contact resistance and dielectric strength. Excellent multipurpose thermostat... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC; Open on Temperature Rise; Close on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 176
- Maximum Current: 5 to 10
from Barksdale Control Products
Barksdale's L1X, T1X & T2X Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat - a safe solution for hazardous locations. The single set point L1X & T1X and dual set point T2X, can switch, measure & control temperatures from 50... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Gas-Actuated / Vapor-Tension (Bulb & Capillary) (Flexible Capillary (optional feature))
- High Temperature Set Point: -50 to 600
- Poles: Single Pole, SP
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With or without epoxy. Without insulation. The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and acontact cap which is made of steel (2) and insulated from it,... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 2A. Type series: BW-E. Features. normally closed. resets automatically. with connector cables. blue epoxy resin insulation. Main parts. 1) Shell 2) Base 3) Bimetal disc 4) Movable contact. 5) Temperature calibration plate 6) Static contacts. Construction. The movable contact are welded... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 2
from Barksdale Control Products
Barksdale's TXR & TXL Series Temperature Switches add flexibility to Barksdale's solid reputation for quality & reliability and offer versatility for your temperature switching needs. These thermostats are ideal for freeze protection or temperature control in hazardous applications. The TXR... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Gas-Actuated / Vapor-Tension (Bulb & Capillary) (Flexible Capillary (optional feature))
- High Temperature Set Point: 15 to 325
- Poles: Single Pole, SP
from Thermik Corporation
Normally closed. High temperature model. Resets automatically. With connector cables. Without insulation. The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and acontact cap which is made of steel (2) and insulated from it,... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 401 to 482
- Maximum Current: 2.5
from Saftty Electronic Technology Co., Limited
Power class: 2A. Type series: BW-E. Features. normally closed. resets automatically. with connector cables. transparent PET cap insulation. Main parts. 1) Shell 2) Base 3) Bimetal disc 4) Movable contact. 5) Temperature calibration plate 6) Static contacts. Construction. The movable contact are... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 2
from Barksdale Control Products
Barksdale's TPR Series Temperature Switch adds flexibility to Barksdale's solid reputation for quality & reliability, and offers versatility for your temperature sensing needs. This switch is ideal for applications where freeze protection or lower temperature control is critical. The TPR is... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Gas-Actuated / Vapor-Tension (Bulb & Capillary) (Flexible Capillary)
- High Temperature Set Point: 40
- Poles: Single Pole, SP
from Thermik Corporation
Normally closed. Resets automatically. With pins. With epoxy. Without insulation. The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and acontact cap which is made of steel (2) and insulated from it, plus an integrated... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 2A. Type series: BW-E. Features. normally closed. resets automatically. with connector cables. plastic shell insulation. Main parts. 1) Shell 2) Base 3) Bimetal disc 4) Movable contact. 5) Temperature calibration plate 6) Static contacts. Construction. The movable contact are welded to... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 95 to 320
- Maximum Current: 2
from Barksdale Control Products
Barksdale's ML1H & L2H Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat. The single set point ML1H and dual set point L2H, can switch, measure & control temperatures from -50 ° to 450 °F (-45 ° to 232 °C), while... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Poles: Single Pole, SP
- High Temperature Set Point: -50 to 450
- Throws: Double Throw, DT
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With or without epoxy. Without insulation. Switchgear consisting of a movable silver contact (1), a contact bearer (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one another, undetachable and fixed in a... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 122 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. Mylar-Nomex insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 482
- Maximum Current: 1.6 to 7.5
from Barksdale Control Products
Barksdale's THR & THL Series Temperature Switches add flexibility to Barksdale's solid reputation for quality & reliability and offers versatility for your temperature switching needs. These thermostats are ideal for freeze protection or temperature control in more demanding industrial... [See More]
- Switch Type: Normally Open, NO; Normally Closed, NC
- Switch Type: Gas-Actuated / Vapor-Tension (Bulb & Capillary) (Flexible Capillary (optional feature))
- High Temperature Set Point: 15 to 325
- Poles: Single Pole, SP
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With epoxy. Without insulation. Switchgear consisting of a mobile and circular contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one another, undetachable and fixed in... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. without insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 482
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. Silicone coated. Without insulation. Switchgear consisting of a mobile and circular contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one another, undetachable and... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 401 to 482
- Maximum Current: 10
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. without connector cables. without insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 482
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With or without epoxy. Without insulation. The switchgear of type series F1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a contact cap which is made of steel (2) and insulated from it,... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 356
- Maximum Current: 5
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. blue epoxy resin insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. Without epoxy. Without insulation. Switchgear consisting of a movable silver contact (1), a contact bearing pin (2), a spring snap-in disc (3), a bimetallic disc (4) and a contact tongue (5) which is riveted into one another, undetachable... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 248 to 356
- Maximum Current: 60
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. transparent PET cap insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With epoxy. Without insulation. Switchgear consisting of a mobile and circular contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one another, undetachable and fixed in... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 60
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. plastic shell insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With or without epoxy. Without insulation. The switchgear of type series K1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a contact cap which is made of steel (2) and insulated from it,... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. without insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Resets automatically. With pins. With epoxy. Without insulation. The switchgear of type series K1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a contact cap which is made of steel (2) and insulated from it, plus an integrated... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 392
- Maximum Current: 40
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with pin. plastic shell insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. Stationary... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. With connector cables. Without insulation. The switchgear of type series P1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a PTC cap made from barium titanate (2) which sticks out from... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 10
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 7,5 A. Type series: ST01. Features. normally closed. resets automatically. with connector cables. plastic shell insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 7.5
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. With connection pins. Without insulation. The switchgear of type series P1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a PTC cap made from barium titanate (2) which sticks out from... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 10
from Saftty Electronic Technology Co., Limited
Power class: 1,6 A to 10 A. Type series: ST01. Features. normally closed. does not reset automatically. with connector cables. Mylar-Nomex insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 1.6 to 10
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. With connector cables. With a k1 model. Without insulation. The switchgear of type series P1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a PTC cap made from barium titanate (2)... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 10
from Saftty Electronic Technology Co., Limited
Power class: 6,3 A to 25 A. Type series: ST06. Features. normally closed. resets automatically. with connector cables. Mylar-Nomex insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 482
- Maximum Current: 6.3 to 25
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. With connector cables. With epoxy. Without insulation. Switchgear consisting of a mobile and circumferential contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 25
from Saftty Electronic Technology Co., Limited
Power class: 6,3 A to 25 A. Type series: ST06. Features. normally closed. resets automatically. with connector cables. without insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. Stationary... [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 482
- Maximum Current: 6.3 to 25
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. With connector cables. With epoxy. Without insulation. Switchgear consisting of a mobile and circumferential contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is riveted into one... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 42
from Saftty Electronic Technology Co., Limited
Power class: 6,3 A to 25 A. Type series: ST06. Features. normally closed. resets automatically. with connector cables. blue epoxy resin insulation. Main parts. 1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc. Construction. [See More]
- Switch Type: Normally Closed, NC; Open on Temperature Rise
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 6.3 to 25
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. Defined as current sensitive. With connector cables. Without insulation. The switchgear of type series W1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a PTC cap made from barium... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 356
- Maximum Current: 9
from Saftty Electronic Technology Co., Limited
Power class: 10A. Type series: ST07. Features. normally closed. does not reset automatically. with connector cables. transparent PET cap insulation. Main parts. 1) Insulating paper 2) Conductive housing 3) bimetal disc. 4) movable contact 5) stationary silver contact 6) base 7) iron nails. [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 356
- Maximum Current: 10
from Thermik Corporation
Normally closed. Does not reset automatically. Voltage applied. Defined as current sensitive. With connector cables. Without insulation. The switchgear of type series W1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a PTC cap made from barium... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 140 to 320
- Maximum Current: 9
from Saftty Electronic Technology Co., Limited
Power class: 10A. Type series: ST07. Features. normally closed. resets automatically. with connector cables. transparent PET cap insulation. Main parts. 1) Insulating paper 2) Conductive housing 3) bimetal disc. 4) movable contact 5) stationary silver contact 6) base 7) iron nails. Construction. The... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 356
- Maximum Current: 10
from Thermik Corporation
Normally closed. Resets automatically. With connector cables. With epoxy. Without insulation. Switchgear consisting of a movable silver contact (1), a contact bearing pin (2), a spring snap-in disc (3), a bimetallic disc (4) and a contact tongue (5) which is riveted into one another, undetachable... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 356
- Maximum Current: 75
from Saftty Electronic Technology Co., Limited
Power class: 18 A to 27.5 A. Type series: ST08. Features. normally closed. resets automatically. with pin. without insulation. ST08 is a protector with double protection function of overcurrent and overtheating, and its built-in heating wire and bimetal form a series circuit. The overload current... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 176 to 338
- Maximum Current: 18 to 27.5
from Thermik Corporation
Three-pole (normally closed) for three phase AC current use in the star point. resets automatically. with epoxy. without insulation. Switchgear consisting of a mobile and circumferential contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 392
- Maximum Current: 6.3
from Saftty Electronic Technology Co., Limited
Power class: 40 A to 60 A. Type series: ST09. Features. normally closed. with manual reset button. with pin. without insulation. ST09 thermostat is a double-pole, double-throw, resettable or manual reset ultra-current (up to 250VAC 63A) temperature controller. The plastic structural parts isolate... [See More]
- Switch Type: Normally Closed, NC
- Maximum Current: 40 to 60
- Switch Type: Bi-Metal
- Life Cycles: 10000
from Thermik Corporation
Three-pole (normally closed) for three phase AC current use in the star point. resets automatically. with epoxy. without insulation. Switchgear consisting of a mobile and circumferential contact bridge (1), a contact bearing pin (2), a spring snap-in disc (3) and a bimetallic disc (4) which is... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 158 to 356
- Maximum Current: 12
from Saftty Electronic Technology Co., Limited
Power class: 25 A. Type series: ST10. Features. normally closed. resets automatically. with connector cables. transparent PET cap insulation. ST10 high-current thermal protector is a high-current protector with overcurrent, overheating double protection function, built-in heating plate and bimetal... [See More]
- Switch Type: Normally Closed, NC
- Switch Type: Bi-Metal
- High Temperature Set Point: 176 to 338
- Maximum Current: 25