In-line Shafts Mechanical Clutches
Description
In-line shafts mechanical clutches are devices used to connect and disconnect two rotating shafts in a mechanical system. They are designed to transmit torque between the drive and the load, allowing for controlled engagement and disengagement of power. These clutches are typically mounted in-line with the shafts they connect, ensuring a direct and efficient transfer of motion.
Working Principle
In-line shafts mechanical clutches operate by engaging and disengaging the connection between two shafts. This is typically achieved through mechanical actuators that control the clutch's engagement mechanism. When engaged, the clutch transfers power from the driving shaft to the driven shaft, allowing for the transmission of torque. Disengaging the clutch stops the power transfer, enabling the driving shaft to continue rotating independently of the driven shaft. This functionality is particularly useful for controlling power flow in systems where precise timing and torque management are critical.
Applications
In-line shafts mechanical clutches are used in a variety of applications where precise control of power transmission is required. Specific examples include conveyor systems, where they facilitate the controlled start and stop of the conveyor belt, and in material feeders, where they enable the feeder to move forward at variable speeds and stop at set intervals. These clutches are also employed in automotive transmissions to manage the engagement and disengagement of gears.
Advantages over other Mechanical Clutches
One of the key advantages of in-line shafts mechanical clutches is their ability to provide direct torque transmission between shafts, resulting in efficient power transfer. This direct connection minimizes energy loss and enhances the overall performance of the mechanical system. Additionally, their in-line configuration allows for compact system designs, which is beneficial in applications where space is limited.
Limitations
In-line shafts mechanical clutches may have limitations related to their torque capacity and speed ratings. They must be carefully selected to match the specific requirements of the application to avoid issues such as overheating or premature wear. Additionally, the mechanical nature of these clutches means they may require regular maintenance to ensure optimal performance and longevity.
Considerations
When selecting in-line shafts mechanical clutches, several factors should be considered. Initial costs can vary depending on the complexity and specifications of the clutch. Operating expenses may include energy consumption and maintenance costs, which can be influenced by the clutch's durability and the frequency of use. Durability is a critical factor, as it affects the clutch's lifespan and the frequency of replacements. Accuracy in torque transmission is essential for applications requiring precise control. Replacement and maintenance costs should also be factored into the overall cost of ownership, as regular maintenance is necessary to prevent wear and ensure reliable operation.
from Lowell Corporation
Lowell Corporation Cam & Ring Assembly for original equipment manufacturers and plant operation. One way Roller Clutches, Cam and Ring Assembly. Available with and without thick covers. Covers are extra and are mounted to one side or both sides of rim. This roller ramp clutch assembly is the... [See More]
- Mounting: Shaft
- Rotary Speed: 600 to 1800
- Torque: 5.0 to 500.0
- Engagement: Roller Detent
from Hilliard Corporation (The)
The Auto-Lok Differential is used on the primary drive axle and replaces the limited slip or open differential. It is easily incorporated into existing designs and is being offered as an off-the-shelf item for walk-behind equipment [See More]
- Mounting: Shaft
- Shaft: In-line
- Special: Slip clutch / Disengagement Torque Limiter
- Application: Industrial; Other; Lawn and Garden Industry
from Lowell Corporation
Lowell Corporation One Way Sprocket for original equipment manufacturers and plant operation. One Way Roller Clutches, One Way Sprocket Clutches. Economical to buy, easy to apply, simple to use. Pick the size of the sprocket needed and we ’ll build it into an assembly. Or substitute a pulley,... [See More]
- Mounting: Shaft
- Shaft: In-line
- Engagement: Toothed
- Bore Diameter: 0.5620 to 1.25
from Hilliard Corporation (The)
The Hilliard High-Speed Overrunning Clutch provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll... [See More]
- Mounting: Shaft
- Rotary Speed: 10000 to 16000
- Torque: 275.0 to 925.0
- Special: Overrunning
from Lowell Corporation
Lowell Corporation Ratchet Arm Assembly for original equipment manufacturers and plant operation. One Way Roller Clutches, Ratchet Arm Assembly. [See More]
- Mounting: Shaft
- Rotary Speed: 600 to 1800
- Torque: 14.0 to 500.0
- Engagement: Roller Detent
from Hilliard Corporation (The)
Friction Torque Limiters and Couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. [See More]
- Mounting: Shaft
- Rotary Speed: 1800
- Torque: 1.0 to 84.0
- Special: Slip clutch / Disengagement Torque Limiter
from Hilliard Corporation (The)
Hilliard Sprag Clutches are designed for overrunning, backstopping and indexing applications. This clutch is a freewheeling device with an inner race and an outer race, either of which can be the input or output member. The input can drive the output in a chosen direction and permit the output to... [See More]
- Mounting: Shaft
- Rotary Speed: 375 to 3600
- Torque: 275.0 to 36600.0
- Special: Overrunning; Freewheeling; Backstop
from Hilliard Corporation (The)
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end... [See More]
- Mounting: Shaft
- Rotary Speed: 16000
- Torque: 275.0 to 925.0
- Special: Overrunning
from Ondrives.US Corporation, formerly Rino Mechanical
Shaft to shaft friction clutches [See More]
- Mounting: Shaft
- Engagement: Friction
- Torque: 1.0 to 8.3
- Bore Diameter: 0.2500 to 1
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 600
- Torque: 2.2
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
A-Series Tiny-Clutches are miniature roller and cam type single revolution clutches. They also function as a general purpose, rapid action clutch for selectively coupling a continuously rotating input and a driven shaft. The clutch features fast response, high torque capacity for a given size and... [See More]
- Mounting: Shaft
- Rotary Speed: 7000
- Torque: 0.3 to 1.2
- Special: Overrunning
from Renold Canada
DM series direct mounting sprag clutches are specifically designed for use as backstops in applications where. compact dimensions are required. The clutch is designed to fit in a housing with the shaft as the inner race. This type is particularly suitable for use in gear units and similar equipment... [See More]
- Mounting: Shaft
- Rotary Speed: 1800
- Torque: 2520.0
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: Our zero backlash elastomer coupling corporated with our torque limiter. Temperature range: The temperature range is dependent on the chosen Elastomer insert. Backlash: Absolutely backlash-free. Fit tolerance: On the hub/shaft connection 0.01 to 0.05 mm. Service life: R+W Torque limiters are... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 1106.2
- Engagement: Friction
from Huco Dynatork
Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 600
- Torque: 2.2
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1915 Back Stopping Clutch is based off of our D75MR Roller Clutch. This clutch features a 1/4" bore & mounts to the shaft with a crosshole. This clutch is available in Right hand drive & replaces Milford Rivet Part # SH194. [See More]
- Mounting: Shaft
- Rotary Speed: 6000
- Torque: 0.8
- Special: Backstop
from Renold Canada
Stub shaft adaptors for use with SO and SX sprag clutches providing a mounting stub shaft for mechanical elements such as chainwheels, couplings, gears, pulleys, cams, levers, etc, when the size or configuration of these parts does not allow bolting holes to be drilled to match the existing tapped... [See More]
- Mounting: Shaft
- Spring Assistance: Spring Actuation/Engage
- Torque: 27000.0
- Engagement: Sprag
from R+W Coupling Technology
Design: Our zero backlash elastomer coupling incorporated with our torque limter. Available disengagement mode/Function system for all series: multi-position. Temperature range: The temperature range is dependent on the chosen Elastomer insert. Torsional stiffness: Depends on the Elastomer insert. [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 6.6 to 147.5
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1808 Backstopping Clutch is based off of our D125MR Roller Clutch. This clutch features a 1/2" bore & mounts to the shaft with two setscrews at 180 ° instead of the usual 90 °. This clutch is available in either Right or Left hand drive & replaces Milford Rivet Part #... [See More]
- Mounting: Shaft
- Rotary Speed: 2000
- Torque: 4.2
- Special: Overrunning
from Renold Canada
The SA Series clutch is a light duty product with plain bearings. Features. Suitable for all small machine applications where compact dimensions are required. Grease lubricated and sealed for life, offering reliability with maintenance-free duty. Dimensional interchangeability with other leading... [See More]
- Mounting: Shaft
- Rotary Speed: 3450
- Torque: 30.0
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: Model SK1 from 1.5-10 Nm with clamping hub. Model SK1 from 15-2,800 Nm with conical clamp. Optional clamping hub available upon request. Model SKP with pure keyway connection. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Service life: These Torque Limiters are maintenance-free... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 1.1 to 1843.7
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
CR-Series Tiny-Clutches are captured roller and cam assemblies that work the same as our D-Series, but which are installed in your housing. The clutch has near zero backlash & allows high overrunning speeds, making them ideal for machines requiring overrunning, backstopping, freewheeling or... [See More]
- Mounting: Shaft
- Rotary Speed: 7000
- Torque: 0.3
- Special: Overrunning; Freewheeling; Backstop
from Renold Canada
A general purpose clutch suitable for most general light to medium duty applications. Features: Extended spigot at one side to allow direct mounting of chain pinions gears, index arms etc - design flexibility. Sleeve bearing inside the extended spigot - greater strength. Dimensionally identical to... [See More]
- Mounting: Shaft
- Rotary Speed: 1950
- Torque: 1600.0
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: With a single radial clamping screw per hub. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Backlash: Zero backlash connection with R+W's reliable preload design. Service life: R+W Torque Limiters and safety couplings are. maintenance-free and have long service life if the... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 0.1 to 1327.4
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The D-Series TINY-CLUTCH is a miniature roller and cam type one-way clutch. It is designed to be built into the customer's equipment and has no loose parts. The D-Series is most frequently used to allow a driven member to overrun the input, or for backstopping a load, it can also function to convert... [See More]
- Mounting: Shaft
- Rotary Speed: 7000
- Torque: 0.4
- Special: Overrunning
from Renold Canada
A medium to large power capacity sprag clutch and flexible coupling combination range. Features. SO series clutch combined with Pinflex coupling allowing for angular, parallel and axial misalignment. Absorbs vibration and shock loads. SO series clutch with two flexible half Gearflex couplings... [See More]
- Mounting: Shaft
- Rotary Speed: 3600
- Torque: 7120.0
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: With tapered conical sleeves and jack screws for easy disassembly. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Backlash: Zero backlash connection with R+W's reliable preload design. Service life: R+W Torque Limiters and safety couplings are maintenance-free. Material: Bellows... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 2064.9
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1869 Fractional Revolution Pulley Clutch is based off of our SP75B Wrap Spring Clutch. This clutch features a 48 tooth, XL pitch pulley & a 3 lug (Third Revolution) collar. It has a 1/2" bore, mounts with a set screw & crosshole, & replaces Federal APD Part # 30-4325. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from Renold Canada
A high precision, clutch suitable for medium to heavy duty applications. Features. All clutches are fitted with high precision heavy duty bearings for arduous duty applications. Clutch sizes 300 to 700 are fitted with ARO sprags to resist vibration and high transient torques and overloads. SO series... [See More]
- Mounting: Shaft
- Rotary Speed: 3600
- Torque: 27000.0
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: With a single radial clamping screw per hub. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Backlash: Zero backlash connection trough the R+W reliable preload design. Service life: R+W Torque Limiters are maintenance-free. Material: Bellows made of highly elastic stainless steel. [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 0.7 to 626.8
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1479 Fractional Revolution Sprocket Clutch is based off of our SP75D Wrap Spring Clutch. This clutch features a 60 tooth, 25 pitch Sprocket, a 2 lug (Half Revolution) collar & an over-travel stop. It has a 3/8" bore, mounts with a crosshole & replaces R. Funk # A8524. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: With clamping hub and 1 radial screw ISO 4762. Absolutely backlash free through frictional. clamping connection. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Service life: Maintenance free when operated within the. technical specifications. Material: Torque limiting portion:... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 2064.9
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 2580 Half Revolution Spring Clutch is based off of our SP75D Wrap Spring Clutch. This clutch features a plain drum, a 2 lug (Half Revolution) collar & an over-travel stop. It has a 3/8" bore & mounts with a crosshole. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: Model SK1 from 1.5-10 Nm with clamping hub. Model SK1 from 15-2,800 Nm with conical clamp. Optional clamping hub available upon request. Model SKP with pure keyway connection. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Service life: These Torque Limiters are maintenance-free... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 2064.9
- Engagement: Friction
from Huco Dynatork
Materials & Finishes. Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sintered bronze.Fasteners:Alloy Steel, black oiled. [See More]
- Mounting: Shaft
- Rotary Speed: 100
- Torque: 0.4
- Special: Slip clutch / Disengagement Torque Limiter
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1868 Indexing Pulley Clutch is based off of our SP75B Wrap Spring Clutch. This clutch features a 48 tooth, XL pitch pulley & a 2 lug (Half Revolution) collar. It has a 1/2" bore, mounts with a set screw & crosshole, & replaces Federal APD Part # 30-4117. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: Clamping hub with one ISO 4762 screw per hub. Components of compact and rigid design with backlash free interface. Misalignment compensation via torsionally rigid bellows. Temperature range: -30 to +100 ° C. Service life: These couplings are maintenance free and stable over their entire... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 2.9 to 516.2
- Engagement: Friction
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1930 Indexing Spring Clutch is based off of our SP75D Wrap Spring Clutch. This clutch features a 19 tooth, 25 pitch Sprocket, a 1 lug (Single Revolution) collar & an over-travel stop. It has a 3/8" bore, mounts with a crosshole & replaces R. Funk # A18676. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: Clamping hub with one ISO 4762 screw per hub. Components of compact and rigid design with backlash free interface. Misalignment compensation via elastomer insert. Temperature range: -30 to +100 ° C. Service life: These couplings are maintenance free and stable over their entire service... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 516.2
- Engagement: Friction
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1478 Indexing Sprocket Clutch is based off of our SP75D Wrap Spring Clutch. This clutch features a 48 tooth, 25 pitch Sprocket, a 1 lug (Single Revolution) collar & an over-travel stop. It has a 3/8" bore, mounts with a crosshole & replaces R. Funk # A8523. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: With clamp collar and screw per ISO 4762 Components of compact and rigid design with backlash free interface. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Service life: These couplings are maintenance free and stable over their entire service life if technical limits are not... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 516.2
- Engagement: Friction
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 2536 One Way Roller Clutch is based off of our D125 Roller Clutch. This clutch features a cam with no bore & an 10mm external square for mounting, it has a special housing with an arm & is Right hand drive. This clutch is used to convert an oscillating drive into rotary... [See More]
- Mounting: Shaft
- Rotary Speed: 2000
- Torque: 4.2
- Special: Overrunning
from R+W Coupling Technology
Design: Keyway per DIN 6885 or ANSI standard dimensions Components of compact and rigid design with backlash free interface. Temperature range: -30 to +120 ° C (3.6 F to 270 F). Service life: These couplings are maintenance free and stable. over their entire service life if technical limits are. [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 3.7 to 516.2
- Engagement: Friction
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 1692 One-Way Clutch is based off of our D75PM Roller Clutch. This clutch features heavy duty springs, a 1/4" bore & mounts to the shaft with a set screw. This clutch is available in Left hand drive & replaces Pellerin Milnor part # 54M105. [See More]
- Mounting: Shaft
- Rotary Speed: 6000
- Torque: 0.8
- Special: Overrunning
from R+W Coupling Technology
Design: Two part assembly for installation into prefabricated coupling components. Part 1: Engagement receptacle. Part 2: Module with self-contained, spring loaded plunger. The spring tension is adjustable in the field. The set force is visible on the adjustment scale. [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 737.5 to 117994.1
- Engagement: Friction
from Tiny-Clutch | Helander Products, Inc.
The Tiny-Clutch 2448 Overrunning Spring Clutch is based off of our SP75E Wrap Spring Clutch. This clutch features a 3-Hole drum & a zero lug collar. It has a 1/2" bore & mounts with two set screws at 90 °. [See More]
- Mounting: Shaft
- Special: Overrunning
- Torque: 4.2
- Spring Assistance: Spring Actuation/Engage
from R+W Coupling Technology
Design: Drive side: Coupling hub with keyway connection or spline profile. Output side: Adapter fl ange with 12x fastening threads. The bearing is Integrated. Modules: Evenly spread on the circumference. Adjustable within the adjustment range. Temperature range: -30 to +120 ° C. Service life:... [See More]
- Mounting: Shaft
- Special: Slip clutch / Disengagement Torque Limiter (optional feature)
- Torque: 737.5 to 117994.1
- Engagement: Friction