Shaft Electric Rotary Actuators
from ABB Measurement & Analytics
General specifications: With integrated electronic unit or for use with separate electronic unit. Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof... [See More]
- Rotational Output: Shaft
- Maximum Torque: 885
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Festo Corporation
With rotary vane. Integrated rotary potentiometer. Suitable for servopneumatic applications with stepping motor driver CPX-CMAX, end-position controller CPX-CMPX, or SPC11 and measuring module CPX-CMIX. Compact design [See More]
- Rotational Output: Shaft
- Axial Load: 11.24
- Supply Voltage: 10
- Radial Load: 26.98
from Indelac Controls, Inc.
The R Series compact rotary electric actuator was specifically designed for small ball valves and dampers. This heavy duty reversing actuator develops 100 lb ·in torque and rotates form 0 to 90 in 2.5 . The spur gear drive train has been designed for severe applications and as in all ICI... [See More]
- Rotational Output: Shaft; Box-Shape
- Maximum Torque: 100
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof without the need for position- or torque-dependent shut-off. Adjustable... [See More]
- Rotational Output: Shaft
- Maximum Torque: 11062
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Festo Corporation
With rotary vane. Integrated rotary potentiometer. Suitable for servopneumatic applications with stepping motor driver CPX-CMAX, end-position controller CPX-CMPX, or SPC11 and measuring module CPX-CMIX. Compact design [See More]
- Rotational Output: Shaft
- Axial Load: 26.98
- Supply Voltage: 10
- Radial Load: 78.68
from Indelac Controls, Inc.
The S series compact rotary electric actuator was specifically designed for valve sizes from ¾ ” to 2 ½ ”and dampers that do not exceed the rated torque of the actuator. These heavy-duty reversing actuators develop 200 lb ·in (model SD) and 300 (model SDX) lb... [See More]
- Rotational Output: Shaft; Box-Shape
- Maximum Torque: 300
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof without the need for position- or torque-dependent shut-off. Adjustable... [See More]
- Rotational Output: Shaft
- Maximum Torque: 141593
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Festo Corporation
With rotary vane. Integrated rotary potentiometer. Suitable for servopneumatic applications with stepping motor driver CPX-CMAX, end-position controller CPX-CMPX, or SPC11 and measuring module CPX-CMIX. Compact design [See More]
- Rotational Output: Shaft
- Axial Load: 112
- Supply Voltage: 10
- Radial Load: 112
from Indelac Controls, Inc.
This series of heavy-duty reversing actuators were developed in 1995 and went into production early in 1996. ICI ‘s K series rotary electric actuator is a machine that was designed to automate quarter turn equipment requiring up to 27300 lb × in (2275 lb × ft) torque. The K series... [See More]
- Rotational Output: Shaft; Box-Shape
- Maximum Torque: 27300
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof without the need for position- or torque-dependent shut-off. Adjustable... [See More]
- Rotational Output: Shaft
- Maximum Torque: 2212
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Indelac Controls, Inc.
Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well. [See More]
- Rotational Output: Shaft
- Maximum Torque: 2000
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof without the need for position- or torque-dependent shut-off. Adjustable... [See More]
- Rotational Output: Shaft
- Maximum Torque: 35398
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Indelac Controls, Inc.
Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well. [See More]
- Rotational Output: Shaft
- Maximum Torque: 1000
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof without the need for position- or torque-dependent shut-off. Adjustable... [See More]
- Rotational Output: Shaft
- Maximum Torque: 4425
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Indelac Controls, Inc.
Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well. [See More]
- Rotational Output: Shaft
- Maximum Torque: 2800
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Process optimization thanks to maximum control precision. Maintenance-free up to 10 years. Electrical actuator for continuous positioning, three-point position control, or bus control. Stallproof without the need for position- or torque-dependent shut-off. Adjustable... [See More]
- Rotational Output: Shaft
- Maximum Torque: 70796
- Supply Voltage: 115 to 230
- Operating Temperature: 185
from Indelac Controls, Inc.
Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well. [See More]
- Rotational Output: Shaft
- Maximum Torque: 400
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Electrical actuator for continuous positioning or step control. Stallproof without the need of position or torque dependent switch off. Explosion-proof design. Three-phase asynchronous motor, hermetically sealed. Connection areas with increased safety. Sturdy gear unit with... [See More]
- Rotational Output: Shaft
- Maximum Torque: 1250
- Supply Voltage: 115 to 230
- Operating Temperature: 140
from Indelac Controls, Inc.
The ProVolt ® Series Multiple Voltage Actuator is a quarter turn Rotary Actuator that will work with all voltage inputs. With the flip of an internal switch on the board, these actuators can accept any of. the following input voltages: 115vac, 230vac, 24vac, 24vdc or 12vdc. No more ordering or... [See More]
- Rotational Output: Shaft
- Maximum Torque: 1000
- Supply Voltage: 12 to 230
- Operating Temperature: -4 to 104
from ABB Measurement & Analytics
General specifications: Electrical actuator for continuous positioning or step control. Stallproof without the need of position or torque dependent switch off. Explosion-proof design. Three-phase asynchronous motor, hermetically sealed. Connection areas with increased safety. Sturdy gear unit with... [See More]
- Rotational Output: Shaft
- Maximum Torque: 16000
- Supply Voltage: 115 to 230
- Operating Temperature: 140
from Indelac Controls, Inc.
ICI ‘s L series rotary electric actuator was designed for quarter turn valve and damper applications requiring up to 3840 lb × in torque. This heavy-duty reversing actuator has been manufactured since 1991 and is well known for its dependability in harsh applications where reliability is... [See More]
- Rotational Output: Shaft; Box-Shape
- Maximum Torque: 3840
- Supply Voltage: 12 to 460
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Electrical actuator for continuous positioning or step control. Stallproof without the need of position or torque dependent switch off. Explosion-proof design. Three-phase asynchronous motor, hermetically sealed. Connection areas with increased safety. Sturdy gear unit with... [See More]
- Rotational Output: Shaft
- Maximum Torque: 2212
- Supply Voltage: 115 to 230
- Operating Temperature: 140
from Indelac Controls, Inc.
ICI ‘s M series rotary electric actuator was designed for quarter turn valve and damper applications requiring up to 1500 lb ·in torque. This heavy-duty reversing actuator has been manufactured for over twenty years and has achieved an impeccable reputation for reliability in... [See More]
- Rotational Output: Shaft; Box-Shape
- Maximum Torque: 1500
- Supply Voltage: 12 to 230
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Electrical actuator for continuous positioning or step control. Stallproof without the need of position or torque dependent switch off. Explosion-proof design. Three-phase asynchronous motor, hermetically sealed. Connection areas with increased safety. Sturdy gear unit with... [See More]
- Rotational Output: Shaft
- Maximum Torque: 4000
- Supply Voltage: 115 to 230
- Operating Temperature: 140
from Indelac Controls, Inc.
Model ES@ is a light duty actuator designed for fail-safe applications. For best life expectancy it is recommended that model ES2 be powered in both clockwise (CW) and counter clockwise (CCW) directions. If used in this manner one can expect over 2,000 open/close cycles. When allowed to spring to... [See More]
- Rotational Output: Shaft; Box-Shape
- Maximum Torque: 200
- Supply Voltage: 115
- Operating Temperature: -40 to 150
from ABB Measurement & Analytics
General specifications: Electrical actuator for continuous positioning or step control. Stallproof without the need of position or torque dependent switch off. Explosion-proof design. Three-phase asynchronous motor, hermetically sealed. Connection areas with increased safety. Sturdy gear unit with... [See More]
- Rotational Output: Shaft
- Maximum Torque: 500
- Supply Voltage: 115 to 230
- Operating Temperature: 140
from Indelac Controls, Inc.
Indelac Controls is proud to introduce models ASC4, ASC6, & ASC10. These heavy duty spring return actuators utilize an electro-mechanical clutch in order to achieve modulating control as well as DC voltage options for our already popular spring return electric actuators. ICI ’s new ASC... [See More]
- Rotational Output: Shaft
- Maximum Torque: 400
- Supply Voltage: 115 to 230
- Operating Temperature: -40 to 150
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
24 Volt DC Motor. Motorized actuator. Adjustable limit stops. Variable speed control [See More]
- Rotational Output: Shaft
- Maximum Torque: 51
- Supply Voltage: 10 to 24
- Axial Load: 51
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 10°
- Maximum Torque: 0.3750
- Number: Single Shaft
from ProMation Engineering, Inc.
The ProMation Engineering explosion proof actuators are designed for use in hazardous locations. They meet the latest Class I and Class II Division 1 standards per UL 1203. The explosion proof actuators share the same electronic and mechanical components as the ProMation Standard Location products... [See More]
- Rotational Output: Shaft
- Rotation Angle: 220°
- Supply Voltage: 24 to 230
- Number: Single Shaft
from Baumer Ltd.
Often format alignments are still manual what means a big potential for improvement. Baumer developed an ultra-flexible shaft positioning system offering a wide selection of modular configurations for your individual choice of the required level of automation. Multicon and MulticonDrive. versatile... [See More]
- Rotational Output: Shaft
- Maximum Torque: 0.7965
- Supply Voltage: 24
- Operating Temperature: 5 to 104
from Ruskin Company
The RJ series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque to the damper with, and without, power applied to the actuator. The RJ versions are provided with 1... [See More]
- Rotational Output: Shaft
- Maximum Torque: 53
- Supply Voltage: 24
- Operating Temperature: -25 to 140
from MTC Industries & Research Carmiel Ltd.
The ERSA-0311 is a high quality & accurate product, optimized for UAV requirements, such as temperature range from -40 °C to 71 °C, EMI RFI shielding and high reliability. The ERSA-0311 is a 28 VDC based redundant electro-mechanical rotary servo actuator with redundant electronics, dual... [See More]
- Rotational Output: Shaft
- Maximum Torque: 221
- Supply Voltage: 24 to 32
- Operating Temperature: -40 to 158
from Hymark/Kentucky Gauge
Compact rotary actuator. Quick change-over & positioning on secondary axes. All-in-one gearmotor-drive-position controller & encoder. Closed loop position control. Absolute multiturn encoder. RD53 with integrated halt-brake. Boot loader via CANopen [See More]
- Rotational Output: Shaft
- Maximum Torque: 106
- Supply Voltage: 24
- Axial Load: 11.24
from Harold Beck and Sons, Inc.
Group 31 compact valve actuators are designed for coupling to small quarter-turn ball and butterfly valves. The compact, in-line design consists of an output section housing the drive train and motor, and a control module section containing the electronics. Together, these two sections provide an... [See More]
- Rotational Output: Shaft
- Maximum Torque: 360
- Supply Voltage: 120
- Operating Temperature: -40 to 149
from Yamaha Motor- Robot Division
Position repeatability accuracy of +/-30seconds (0.0083 °). The R type can be used as the rotation axis when combined with other robots, or utilized for a wide range of applications such as index tables. Harmonic drive delivers high-strength and high-accuracy. [See More]
- Rotational Output: Shaft
- Maximum Torque: 935
- Supply Voltage: 100 to 200
- Time / 180°: 64.8
from Lika Electronic
Rugged high torque positioning unit. Up to 24 Nm starting torque. Real 20 bit multiturn encoder. Closed loop control. Woodworking, packaging, bottling & labelling machines [See More]
- Rotational Output: Shaft
- Maximum Torque: 133
- Supply Voltage: 24
- Axial Load: 44.96
from Kinematics Manufacturing, Inc.
Reliability. Kinematics slewing drives are designed and tested to guarantee a 30-year field life. All aspects of engineering control are based on creating a low-cost, reliable solution. Using the same methods and procedures that earned us our ISO 9001, CE, REACH, and TUV certifications, we qualify... [See More]
- Rotational Output: Shaft
- Number: Single Shaft
- Maximum Torque: 44248
from H2W Technologies
Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. The result is a... [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees
- Maximum Torque: 45
- Number: Single Shaft
from ProMation Engineering, Inc.
The ProMation Engineering line of quarter-turn industrial actuators now includes CSA Certified explosion proof and ignition proof actuators. Each model uses our proven industrial strength geartrains and robust electronics and controls. Explosion Proof and Ignition Proof. Certifications: Class I,... [See More]
- Rotational Output: Shaft
- Maximum Torque: 300
- Supply Voltage: 24 to 230
- Rotation Angle: 220°
from Baumer Ltd.
Often format alignments are still manual what means a big potential for improvement. Baumer developed an ultra-flexible shaft positioning system offering a wide selection of modular configurations for your individual choice of the required level of automation. Multicon and MulticonDrive. versatile... [See More]
- Rotational Output: Shaft
- Maximum Torque: 0.5575
- Supply Voltage: 24
- Operating Temperature: 5 to 104
from MTC Industries & Research Carmiel Ltd.
The MSA-2907-D (formerly MSA-2411) Servo Actuator is a high quality, reliable product, optimized for UAV requirements such as : temperature range from -40 ºC to + 71 ºC, EMI RFI shielding and high reliability. The MSA-2907-D is a servo actuator with brushless DC motor, high efficiency... [See More]
- Rotational Output: Shaft
- Maximum Torque: 230
- Supply Voltage: 18 to 32
- Operating Temperature: -40 to 158
from Hymark/Kentucky Gauge
All-in-one rotary actuator. Integrated drive and position controller absolute multiturn. Closed loop position control. 150 and 250W bldc motors, size 70. Real absolute multiturn encoder (4096 x 65536) [See More]
- Rotational Output: Shaft
- Maximum Torque: 21.24
- Supply Voltage: 24
- Operating Temperature: 32 to 140
from Harold Beck and Sons, Inc.
Precise, reliable, and consistent positioning of control valves is of critical importance in maintaining overall process control. Beck ’s unique ability to quickly, accurately, and consistently track the control signal allows you to fully utilize your control system ’s capabilities. This... [See More]
- Rotational Output: Shaft
- Maximum Torque: 960
- Supply Voltage: 120 to 240
- Operating Temperature: -40 to 185
from Lika Electronic
Integrated positioning unit. High performance brushless motor. RS232 service interface for easy setup. Real absolute multi turn encoder. Additional jog +/- buttons for easy calibration [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 44.96
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 16°
- Maximum Torque: 0.6875
- Number: Single Shaft
from ProMation Engineering, Inc.
The ProMation Engineering explosion proof actuators are designed for use in hazardous locations. They meet the latest Class I and Class II Division 1 standards per UL 1203. The explosion proof actuators share the same electronic and mechanical components as the ProMation Standard Location products... [See More]
- Rotational Output: Shaft
- Maximum Torque: 445
- Supply Voltage: 24 to 230
- Rotation Angle: 220°
from MTC Industries & Research Carmiel Ltd.
The MERSA-0412 is a high quality and accurate product. It has been optimized for UAV requirements, such as temperature range from -40 °C to +71 °C, EMI RFI shielding and high reliability. The MERSA is a 28 VDC based electro-mechanical rotary servo actuator with redundant electronics, dual DC... [See More]
- Rotational Output: Shaft
- Maximum Torque: 53.1
- Supply Voltage: 24 to 32
- Operating Temperature: -40 to 158
from Hymark/Kentucky Gauge
Rugged high torque positioning unit. Up to 24 Nm starting torque. Real 20 bit multiturn encoder. Closed loop control. Woodworking, packaging, bottling & labelling machines [See More]
- Rotational Output: Shaft
- Maximum Torque: 133
- Supply Voltage: 24
- Axial Load: 44.96
from Harold Beck and Sons, Inc.
Precise, reliable, and consistent positioning of control valves is of critical importance in maintaining overall process control. Beck ’s unique ability to quickly, accurately, and consistently track the control signal allows you to fully utilize your control system ’s capabilities. This... [See More]
- Rotational Output: Shaft
- Maximum Torque: 3000
- Supply Voltage: 120 to 240
- Operating Temperature: -40 to 185
from Lika Electronic
All-in-one rotary actuator. Integrated drive and position controller absolute multiturn. Closed loop position control. 150 and 250W bldc motors, size 70. Real absolute multiturn encoder (4096 x 65536) [See More]
- Rotational Output: Shaft
- Maximum Torque: 21.24
- Supply Voltage: 24
- Operating Temperature: 32 to 140
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 20°
- Maximum Torque: 1.88
- Number: Single Shaft
from ProMation Engineering, Inc.
P1 Series. 300 in lbs / 35 Nm - 12v, 24v, 120v, 230v. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but also... [See More]
- Rotational Output: Shaft
- Maximum Torque: 300
- Supply Voltage: 12 to 230
- Operating Temperature: -22 to 150
from Hymark/Kentucky Gauge
Compact positioning unit for secondary axes. Integrated drive, position controller & encoder. Closed loop position control. Absolute multi turn encoder. M12 connections. Boot loader via CAN [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 11.24
from Harold Beck and Sons, Inc.
Precise, reliable, and consistent positioning of control valves is of critical importance in maintaining overall process control. Beck ’s unique ability to quickly, accurately, and consistently track the control signal allows you to fully utilize your control system ’s capabilities. This... [See More]
- Rotational Output: Shaft
- Maximum Torque: 21600
- Supply Voltage: 120 to 240
- Operating Temperature: -40 to 185
from Lika Electronic
Integrated positioning unit. High performance brushless motor. RS232 service interface for easy setup. Real absolute multi turn encoder. Integrated motor brake for enhanced halt functions. Additional jog +/- buttons for easy calibration [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 44.96
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 20°
- Maximum Torque: 49.69
- Number: Single Shaft
from ProMation Engineering, Inc.
P1.A Series. 445 in lbs / 50 Nm - 12v, 24v, 120v, 230v. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but also... [See More]
- Rotational Output: Shaft
- Maximum Torque: 445
- Supply Voltage: 12 to 230
- Operating Temperature: -22 to 150
from Hymark/Kentucky Gauge
Integrated positioning unit. High performance brushless motor. RS232 service interface for easy setup. Real absolute multi turn encoder. Additional jog +/- buttons for easy calibration [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 44.96
from Harold Beck and Sons, Inc.
Group 22 rotary actuators offer excellent performance in a maintenance-free design, plus the added flexibility and features provided by microprocessor-based electronics. Ideally suited for large fan damper applications, these rotary actuators are capable of modulating both static and dynamic loads... [See More]
- Rotational Output: Shaft
- Maximum Torque: 36000
- Supply Voltage: 120 to 575
- Operating Temperature: -40 to 185
from Lika Electronic
Compact positioning unit for secondary axes. Integrated drive, position controller & encoder. Closed loop position control. Absolute multi turn encoder. M12 connections. Boot loader via CAN [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 11.24
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 40°
- Maximum Torque: 0.6250
- Number: Single Shaft
from ProMation Engineering, Inc.
P1.B Series. 135 in lbs / 15 Nm - 12v, 24v, 120v, 230v. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but also... [See More]
- Rotational Output: Shaft
- Maximum Torque: 135
- Supply Voltage: 12 to 230
- Operating Temperature: -22 to 150
from Hymark/Kentucky Gauge
Integrated positioning unit. High performance brushless motor. RS232 service interface for easy setup. Real absolute multi turn encoder. Integrated motor brake for enhanced halt functions. Additional jog +/- buttons for easy calibration [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 44.96
from Harold Beck and Sons, Inc.
Group 22 rotary actuators offer excellent performance in a maintenance-free design, plus the added flexibility and features provided by microprocessor-based electronics. Ideally suited for large fan damper applications, these rotary actuators are capable of modulating both static and dynamic loads... [See More]
- Rotational Output: Shaft
- Maximum Torque: 48000
- Supply Voltage: 208 to 575
- Operating Temperature: -40 to 185
from Lika Electronic
Compact positioning unit for secondary axes. Integrated drive, position controller & encoder. Closed loop position control. Integrated motor brake. Absolute multi turn encoder. M12 connections. Boot loader via CAN [See More]
- Rotational Output: Shaft
- Maximum Torque: 44.25
- Supply Voltage: 24
- Axial Load: 11.24
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 40°
- Maximum Torque: 2.44
- Number: Single Shaft
from ProMation Engineering, Inc.
P10 Series. 22000 in lbs/2500 Nm - On/Off/Jog/Proportional. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but... [See More]
- Rotational Output: Shaft
- Maximum Torque: 22000
- Supply Voltage: 120 to 480
- Operating Temperature: -22 to 150
from Harold Beck and Sons, Inc.
Group 22 rotary actuators offer excellent performance in a maintenance-free design, plus the added flexibility and features provided by microprocessor-based electronics. Ideally suited for large fan damper applications, these rotary actuators are capable of modulating both static and dynamic loads... [See More]
- Rotational Output: Shaft
- Maximum Torque: 96000
- Supply Voltage: 208 to 575
- Operating Temperature: -40 to 185
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 40°
- Maximum Torque: 82.12
- Number: Single Shaft
from ProMation Engineering, Inc.
P11 Series. 26500 in lbs/3000 Nm - On/Off/Jog/Proportional. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but... [See More]
- Rotational Output: Shaft
- Maximum Torque: 26500
- Supply Voltage: 120 to 480
- Operating Temperature: -22 to 150
from Harold Beck and Sons, Inc.
Beck rotary damper drives and rotary actuators are a benchmark in industrial control damper actuation. Unlike typical electric actuators, Beck damper drives and valve actuators are capable of continuous modulation and precision control without thermal duty-cycle or motor burnout concerns. Beck... [See More]
- Rotational Output: Shaft
- Maximum Torque: 960
- Supply Voltage: 120 to 575
- Operating Temperature: -40 to 185
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: Less than 45 degrees; 40°
- Maximum Torque: 164
- Number: Single Shaft
from ProMation Engineering, Inc.
P13 Series. 40000 in lbs/4500 Nm - On/Off/Jog/Proportional. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but... [See More]
- Rotational Output: Shaft
- Maximum Torque: 40500
- Supply Voltage: 120 to 230
- Operating Temperature: -22 to 150
from Harold Beck and Sons, Inc.
Beck rotary damper drives and rotary actuators are a benchmark in industrial control damper actuation. Unlike typical electric actuators, Beck damper drives and valve actuators are capable of continuous modulation and precision control without thermal duty-cycle or motor burnout concerns. Beck... [See More]
- Rotational Output: Shaft
- Maximum Torque: 3000
- Supply Voltage: 120 to 575
- Operating Temperature: -40 to 185
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: 90°
- Maximum Torque: 0.9375
- Number: Single Shaft
from ProMation Engineering, Inc.
P2 Series. 800 in lbs / 90 Nm - On/Off/Jog/Proportional. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but... [See More]
- Rotational Output: Shaft
- Maximum Torque: 800
- Supply Voltage: 12 to 480
- Operating Temperature: -22 to 150
from Harold Beck and Sons, Inc.
Beck rotary damper drives and rotary actuators are a benchmark in industrial control damper actuation. Unlike typical electric actuators, Beck damper drives and valve actuators are capable of continuous modulation and precision control without thermal duty-cycle or motor burnout concerns. Beck... [See More]
- Rotational Output: Shaft
- Maximum Torque: 21600
- Supply Voltage: 120 to 575
- Operating Temperature: -40 to 185
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: 60°
- Maximum Torque: 18.75
- Number: Single Shaft
from ProMation Engineering, Inc.
P4 Series. 3500 in lbs / 400 Nm - On/Off/Jog/Proportional. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but... [See More]
- Rotational Output: Shaft
- Maximum Torque: 3500
- Supply Voltage: 12 to 480
- Operating Temperature: -22 to 150
from Harold Beck and Sons, Inc.
Beck rotary damper drives and rotary actuators are a benchmark in industrial control damper actuation. Unlike typical electric actuators, Beck damper drives and valve actuators are capable of continuous modulation and precision control without thermal duty-cycle or motor burnout concerns. Beck... [See More]
- Rotational Output: Shaft
- Maximum Torque: 62400
- Supply Voltage: 120 to 575
- Operating Temperature: -40 to 185
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Rotational Output: Shaft
- Rotation Angle: 60°
- Maximum Torque: 46.88
- Number: Single Shaft
from ProMation Engineering, Inc.
P6 Series. 5750 in lbs / 650 Nm - On/Off/Jog/Proportional. The ProMation Engineering line of quarter-turn industrial actuators are our flagship products with regard to reliability, application flexibility, and optional configurations. They have been used primarily on butterfly and ball valves, but... [See More]
- Rotational Output: Shaft
- Maximum Torque: 5800
- Supply Voltage: 12 to 480
- Operating Temperature: -22 to 150