Hardfacing / Repair Alloy Filler Alloys and Consumables
from Hobart Brothers, an ITW Company
Brand. McKAY ®. Category. Build-Up & Overlay Gas-Shielded Wires. Description. This is a low alloy steel deposit. Designed for build up on mild and low alloy steels only. Has good compressive strength and impact resistance making it an excellent base for abrasion resistant alloys. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Diameter / Thickness: 0.0450
from Lincoln Electric Co. (The)
Top Features. High resistance to cracking. High strength. Designed for joining difficult to weld steel. Typical Applications. High carbon, low alloy, high strength, manganese steels. Base for hardfacing or stainless steel cladding. Welding Positions. All, except vertical down [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Handfacing Stick (SMAW) Electrode
- Applications / Materials Joined: High Carbon, Low Alloy, High Strength, Manganese Steels, Base for Hardfacing or Stainless Steel Cladding
- Diameter / Thickness: 0.0938 to 0.1250
from ESAB Welding and Cutting Products
Features. OK Band NiCrMo3 is a nickel-based strip for submerged arc or electroslag strip cladding. Together with OK Flux 10.11 for electroslag welding or OK Flux 10.16 for subarc welding, produces a weld overlay with good corrosion resistance and high-temperature properties. Industries. Nuclear. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy; Nickel Alloy
- Joining Process / Product Form: Strip, sheet or foil
- Applications / Materials Joined: Welding-ESW - Electro-Slag Welding, Welding-SAW - Submerged Arc Welding
- Nominal Composition: P - %, Si 0.10 %, Mn 0.30 %, C <0.1 %, Mo 9 %, Ni >58.0 %, Cr 22 %, S - %, Fe <2.0 %, N 0.05 %
from Lincoln Electric Co. (The)
Top Features. Provides smooth beads and excellent slag removal. Fast-freezing. Notes: Deposit carbon, alloy content and hardness depend upon the ratio of flux melted to wire melted. High voltage promotes high carbon and alloy contents, while low voltage promotes lower carbon and alloy content. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Powder
- Applications / Materials Joined: Hardfacing, Use with Lincore® 20, 30-S, 35-S, 40-S, 42-S, 4130, 8620, 410, 410NiMo, 420 and 96S
- Weld Positions: Flat; Horizontal; Circumferential
from ESAB Welding and Cutting Products
Features. Wear-Arc 4-IP is an all position, iron powder, low hydrogen hardsurfacing electrode providing sound overlays on carbon and low alloy steels, as well as many abrasion-resistant steels. The low hydrogen coating of this electrode promotes excellent fusion with the above steels and on buildup... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux coated stick or electrode for welding or brazing.
from Lincoln Electric Co. (The)
Top Features. Excellent hot slag removal with wire containing columbium, vanadium or very high chrome levels. Use with Lincore 102W, 423L, 423Cr and 102HC. Notes: Deposit carbon, alloy content and hardness depend upon the ratio of flux melted to wire melted. High voltage promotes high carbon and... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Powder
- Applications / Materials Joined: Hardfacing Use with Lincore® 102W, 423L, 423Cr and 102HC
- Weld Positions: Flat; Horizontal; Circumferential
from ESAB Welding and Cutting Products
Features. An AC/DC electrode for heavy impact and abrasion on carbon and manganese steels. Hardness up to 54-56 Rockwell C. Can be used with low voltage machines. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- TIG / Resistance / Cutting Electrodes: Resistance Welding Electrode / Horn
- Joining Process / Product Form: TIG Rod (GTAW)
from Lincoln Electric Co. (The)
Top Features. Modified Type 420 stainless deposit with a carbon content near the high side for as-welded hardness. Designed to produce a weld deposit with 13% chromium, 0.23% carbon when proper procedures are followed. Notes: Deposit carbon, alloy content and hardness depend upon the ratio of flux... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Powder
- Applications / Materials Joined: Use with Lincolnweld® L-60 Mild Steel Wire for Hardfacing
- Weld Positions: Flat; Horizontal; Circumferential
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire with a higher carbon content than Lincore® 102W. Will give a higher hardness tool steel deposit. Deposit is hot [above 204°C (400°F)] machinable, for easy sizing after welding. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.0938 to 0.1250
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire which produces a tool steel deposit that retains hardness at high working temperatures. Used for guide rolls, and work rolls. Can also be used as the seat on blast furnace bells and hoppers. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.1250 to 0.1562
from Lincoln Electric Co. (The)
Top Features. Provides an austenitic manganese deposit which exhibits very good crack resistance. Work-hardens for overlay or joining austenitic manganese steel to itself or to carbon steel. Can be used as a build-up layer before capping with abrasion resistant alloys. Can be used in open arc mode... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux Cored Wire; Flux-cored Self-shielded (FCAW-S) Wire
- Applications / Materials Joined: Spreader Cones, Crusher Hammers, Austenitic Manganese Parts
- Diameter / Thickness: 0.0781 to 0.1094
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire with moderate hardness for build-up before stainless overlay. Good crack resistance and high compressive strength. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.0938 to 0.1562
from Lincoln Electric Co. (The)
Top Features. Intended for build-up before final overlay, and as a final surface for metal-to-metal wear with moderate impact. For automatic and semiautomatic operation on mild and low alloy steels. Good resistance to cross checking. Unlimited deposit thickness. Typical Applications. For Build-up:... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: For Build-up: Tractor Rollers, Trunnions, Idlers, Crane Wheels; For Hardfacing: Shafts, Track Rails, Idler
- Diameter / Thickness: 0.0938 to 0.1250
from Lincoln Electric Co. (The)
Top Features. Designed for build-up on 4140 drill stems in the deep hole drilling industry. For automatic and semiautomatic operation on mild and low alloy steels. Good resistance to cross checking. Unlimited deposit thickness. Typical Applications. Drill stems. Welding Positions. Flat, Horizontal... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Drill Stems
- Diameter / Thickness: 0.0938 to 0.1250
from Lincoln Electric Co. (The)
Top Features. Delivers tough machinable deposits for build-up or final overlay intended for metal-to-metal wear. Use for build-up of steel mill parts such as rougher couplings. Build-up deposit on carbon steel and low alloy steel base metals. It is ideal for rebuilding worn parts to near final... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux Cored Wire; Flux-cored Self-shielded (FCAW-S) Wire
- Applications / Materials Joined: Tractor Rolls and , Idlers, Shovel Parts, Mine Car Wheels, Mill and Crusher, Hammers, Dredge Pumps
- Diameter / Thickness: 0.0450 to 0.1094
from Lincoln Electric Co. (The)
Top Features. Intended for rolling and sliding metal-to-metal wear with moderate impact and abrasion. For automatic and semiautomatic operation on mild and low alloy steels. Recommended as final overlay where medium hardness and good machinability are required. Deposit thickness is unlimited. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: For Build-up: Tractor Rollers, Idlers, Trunnions, Crane Wheels and Caster Rolls; For Hardfacing: Mine Car Wheels, Track Rails, Shafts
- Diameter / Thickness: 0.1250
from Lincoln Electric Co. (The)
Top Features. Higher hardness for metal-to-metal wear and mild abrasion. Used on transfer rollers and guides, crane wheels and shafts. Can be used on low carbon and low alloy steels. Unlimited layers with proper preheat and interpass temperatures and procedures. Typical Applications. Tractor rolls. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux Cored Wire; Flux-cored Self-shielded (FCAW-S) Wire
- Applications / Materials Joined: Tractor Rolls, Mine Car Wheels, Bucket Links and Bases, Guide Rollers, Actuating Cams
- Diameter / Thickness: 0.0781
from Lincoln Electric Co. (The)
Top Features. Designed for rebuilding heavy equipment undercarriages. Deposit is machinable and hot forgeable and resists rolling and sliding metal-to-metal wear. Use on carbon and low alloy steels for good puddle control on roundabout welding. Limited to 4 layers. Typical Applications. Idlers. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Idlers,Drive Sprockets, Mine Car Wheels
- Diameter / Thickness: 0.1250
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire with a 410 martensitic stainless steel deposit. Low carbon content and high corrosion resistance. Soft and easily machined. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.0938 to 0.1562
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire with low carbon deposit, which forms softer, tougher martensite than other roll alloys. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.1250 to 0.1562
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire for general build-up. Can be flame hardened to 38 Rockwell C. Used on mining components such as cable drums, sheaves, gears and shafts. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.0938 to 0.1250
from Lincoln Electric Co. (The)
Top Features. Designed for rebuilding heavy equipment undercarriages. The deposit exhibits enhanced crack resistance and toughness compared to Lincore® 40-S. Intended to resist rolling and sliding metal-to-metal wear. For automatic and semiautomatic operation. Typical Applications. Tractor rollers. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Tractor Rollers, Track Pads, Tractor Idlers
- Diameter / Thickness: 0.1250
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire that is most widely used for caster roll rebuilding. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.0938 to 0.1562
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire with a higher chrome deposit than Lincore® 423L for improved corrosion resistance. Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.0938 to 0.1250
from Lincoln Electric Co. (The)
Top Features. Metal-cored wire, provides a softer "as-welded" deposit than Lincore® 420. More resistance to softening during tempering above 482°C (900°F). Typical Applications. Caster rolls. Welding Positions. Flat, Horizontal and Circumferential [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored Submerged Arc (SAW) Electrode
- Applications / Materials Joined: Caster Rolls
- Diameter / Thickness: 0.1250
from Lincoln Electric Co. (The)
Top Features. Delivers an abrasion resistant deposit, even under conditions of moderate impact. Larger wire diameter sizes may be used for the submerged arc process. Can be used on low carbon, medium carbon, low alloy, manganese and stainless steels. Limited to 4 layers. Typical Applications. [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux Cored Wire; Flux-cored Self-shielded (FCAW-S) Wire
- Applications / Materials Joined: Crusher Rolls, Dredge Cutter Teeth, Ore Chute Baffles, Muller Plows and Tires, Coal Mining Cutting Teeth
- Diameter / Thickness: 0.0450 to 0.1094
from Lincoln Electric Co. (The)
Top Features. Delivers a deposit which resists metal-to-metal rolling or sliding wear as well as mild abrasion. To be used on carbon steel, low alloy steel and manganese steel. Unlimited layers with proper preheat and interpass temperatures and procedures. Typical Applications. Crane wheels. Blower... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux Cored Wire; Flux-cored Self-shielded (FCAW-S) Wire
- Applications / Materials Joined: Crane Wheels, Blower Blades, Rail Ends, Skip Guides, Cams and Transfer Tables
- Diameter / Thickness: 0.0450 to 0.1094
from Lincoln Electric Co. (The)
Top Features. Produces a deposit which resists metal-to-metal wear and mild abrasion. The deposit results in an even harder material when used with the Bulk Tungsten Carbide process. To be used on carbon steel and low alloy steel. Unlimited layers with proper preheat and interpass temperatures and... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Flux Cored Wire; Flux-cored Gas-shielded (FCAW-S) Wire
- Applications / Materials Joined: Crane Wheels, Blower Blades, Bucket Lips, Dredge Parts, Tillage Tools
- Diameter / Thickness: 0.0450 to 0.0625
from Lincoln Electric Co. (The)
Top Features. Iron base chromium carbide alloy designed for applications subject to severe metal to earth abrasion with moderate impact. Can be used at temperatures up to 704°C (1300°F). Can be used on carbon, low alloy, manganese and stainless steels and cast irons. Deposit is limited to two... [See More]
- Welding Filler Types: Hardfacing / Repair Alloy
- Joining Process / Product Form: Metal-cored (GMAW-C) Wire
- Applications / Materials Joined: Augers, Bucket Lips and Sides, Loaders, Brushing and Grinding Equipment, Shaper Sides and Blades
- Diameter / Thickness: 0.0450