Lead Wires RTD Temperature Transmitters
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Sensor Connection: Lead Wires
- Reference Resistance: 100 Ohms; 50 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3308
from Status Instruments, Inc.
The SEM310 is a field mount temperature transmitter designed to replace the terminal block in a sensor head. It is fully encapsulated to ensure environmental integrity. Although small in size it out performs other larger and more expensive transmitters. Also available in DIN rail mount format... [See More]
- Sensor Connection: Terminal Block; Lead Wires
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 3200
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC), 0 to 500 ohms input. 0 to 20mA DC, 0 to 10V DC output. Mechanical relay (25V @ 5A) alarm. 10-36V DC power. Software configured. Performs linearization, square root extraction, and optional limit alarm functions. [See More]
- Sensor Connection: Terminal Block; Lead Wires; Screw Clamps or Lugs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 500 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
from OMEGA Engineering, Inc.
The CYTX231 temperature transmitters send linearized data to a remote location for a data acquisition system or a recorder using a 4-20 or 0-20mA signal. Standard Curve #10 chart shown in the T section is in memory for the silicon diode sensor and excitation of 10A is provided. The CYTX231P operates... [See More]
- Sensor Connection: Lead Wires
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Other (Tungsten, Silver etc.)
- Sensed Temperature: -457 to 980
from Status Instruments, Inc.
PUSH BUTTON IN HEAD TEMPERATURE TRANSMITTERS. SIMPLE PUSH BUTTON CONFIGURATION. HIGH STABILITY. INPUT/OUTPUT ISOLATION. 4 TO 20 mA TWO WIRE OUTPUT. PROGRAMMABLE BURNOUT. USER PUSH BUTTON TRIM. 10 YEAR WARRANTY [See More]
- Sensor Connection: Lead Wires
- Reference Resistance: 100 Ohms; 120 Ohms; 500 Ohms (optional feature); 1000 Ohms (optional feature)
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3200
from Acromag, Inc.
plusmn;100V or 0 to 22mA DC input ranges (AC current with optional sensor). 0 to 20mA DC, 0 to 10V DC output • Mechanical relay alarm (25V @ 5A) • 10-36V DC power. Software configured, performs linearization, square root extraction, and optional limit alarm functions. The 811T... [See More]
- Sensor Connection: Terminal Block; Lead Wires; Screw Clamps or Lugs
- Mounting Options: DIN Rail Mounting
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
from OMEGA Engineering, Inc.
The TX62, TX63, TX64, TX65 programmable transmitters provide an isolated 4 to 20 mA signal linearized to temperature or process input. The TX62 & TX63 smart transmitters provide the same functions as the TX64 & TX65 with the additional feature of smart communications. Smart communications... [See More]
- Sensor Connection: Lead Wires
- Mounting Options: Cabinet (Enclosure) or Board Mounting
- Reference Material: Platinum
- Output: Analog Current (Typical 4-20 mA)
from Status Instruments, Inc.
The SEM210 is a second generation ‘Smart ’ in head temperature transmitter that accepts any commonly used temperature sensor, Slidewire transducer or Millivolt signal and converts the output to the industry standard 4-20 mA transmission signal. The sensor type and range are easily... [See More]
- Sensor Connection: Lead Wires
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 3200
from Acromag, Inc.
0 to 50KHz, 0 to 65535 pulses input. 0 to 20mA DC, 0 to 10V DC output. Mechanical alarm relay (25V @ 5A). 10-36V DC power. Software configured; pulse counter; signal averaging; optional limit alarm functions. Acromag's IntelliPack ® series is a family of high-performance, multi-function I/O... [See More]
- Sensor Connection: Terminal Block; Lead Wires; Screw Clamps or Lugs
- Mounting Options: DIN Rail Mounting
- Other Input: Accepts Other Specific Sensor Inputs
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc); Relay or Switch Output
from Acromag, Inc.
DT330 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT335 model is a four-wire dual transmitter that isolates and converts RTD or linear resistance sensor inputs to proportional control signals. Each channel supports DC current or voltage output. [See More]
- Sensor Connection: Terminal Block; Lead Wires; Screw Clamps or Lugs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 0-4500 ohm
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Mounting Options: DIN Rail Mounting