Serial Interface RTD Temperature Transmitters
from Pyromation
Temperature transmitters make it possible to send a scalable (4 to 20) mA signal from a temperature sensor to a control device without investing in long, expensive runs of thermocouple or RTD wire. Pyromation carries programmable RTD and thermocouple temperature transmitters that can be mounted in... [See More]
- Interface: Serial Interface; Other Computer Interface
- Reference Resistance: 10 Ohms (optional feature); 100 Ohms (optional feature); 500 Ohms (optional feature); 1000 Ohms (optional feature); 2000
- Reference Material: Platinum (optional feature); Nickel/Nickel Alloys (optional feature)
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Interface: Serial Interface; Other Computer Interface
- Reference Resistance: 100 Ohms; 50 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3308
from Automation24, Inc.
Temperature transmitter TxRail-USB - 8806037306 from NOVUS automation is the accurate and reliable way to convert any number of temperature signals to a usable current or voltage analog signals. The TxRail-USB - 8806037306 temperature trensmitter can receive inputs from thermocouple, RTD,... [See More]
- Interface: Serial Interface
- Local Interface: Computer Interface
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Sensor Connection: Screw Clamps or Lugs
from Status Instruments, Inc.
The SEM310 is a field mount temperature transmitter designed to replace the terminal block in a sensor head. It is fully encapsulated to ensure environmental integrity. Although small in size it out performs other larger and more expensive transmitters. Also available in DIN rail mount format... [See More]
- Interface: Serial Interface
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 3200
from Ultra Energy
4500H Temp Transmitter, Industrial Temperature Transmitter, Head Mount RTD [See More]
- Interface: Serial Interface
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1202
from West Control Solutions
The microprocessor-controlled KS 816 controller provides precise, low-cost multi-loop control of temperature and features an interface for bus or field-bus. The KS 816 can be used as a freely configurable field-bus transmitter with universal inputs for standard signals, thermocouples and Pt 100... [See More]
- Interface: Serial Interface
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
from Acromag, Inc.
100 ohm Pt RTD or 0-900 ohm input. 4-20mA output (sink/source). 12-32V DC loop/local power. USB configuration. The TT231 model is a space-saving two-wire transmitter that converts a 100 ohm Platinum RTD sensor input to a proportional 4-20mA signal. Power is received from the output loop current or a... [See More]
- Interface: Serial Interface
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Resistance Inputs
from OMEGA Engineering, Inc.
The CYTX231 temperature transmitters send linearized data to a remote location for a data acquisition system or a recorder using a 4-20 or 0-20mA signal. Standard Curve #10 chart shown in the T section is in memory for the silicon diode sensor and excitation of 10A is provided. The CYTX231P operates... [See More]
- Interface: Serial Interface
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Other (Tungsten, Silver etc.)
- Sensed Temperature: -457 to 980
from E+E Elektronik
The EE300Ex temperature transmitter is dedicated for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), International (IECEx), USA / Canada (FM) and China (NEPSI) for flammable gas dust applications. The intrinsically safe EE300Ex can be installed in the... [See More]
- Interface: Serial Interface
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -40 to 356