Analog Current (e.g., 4-20 mA) RTD Temperature Transmitters
from Tempco Electric Heater Corporation
The Tempco ETM Series of 2-wire transmitters are offered in isolated, non-isolated and high precision isolated versions. They are designed to fit in a standard aluminum, iron or plastic industrial connection head, DIN size B or larger [See More]
- Output: Analog Current (Typical 4-20 mA)
- Supply Voltage: 6.5 to 36 VDC
- Sensor Connection: Screw Clamps or Lugs
- Operating Temperature: -40 to 185
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 50 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3308
from Conax Technologies
RTD, TC, Ohm, or mV Input. Extremely High Measurement Accuracy. HART ® Communication. Complies with European ATEX, and CSA/FM Requirements for Hazardous Location Installation. 1- or 2-Channel Version. Application: Linearized temperature measurement with Pt 100...Pt 1000, Ni100...Ni1000, or TC... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 7000 Ohms Max.
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Resistance Inputs
from Pyromation
Temperature transmitters make it possible to send a scalable (4 to 20) mA signal from a temperature sensor to a control device without investing in long, expensive runs of thermocouple or RTD wire. Pyromation carries programmable RTD and thermocouple temperature transmitters that can be mounted in... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms (optional feature); 100 Ohms (optional feature); 500 Ohms (optional feature); 1000 Ohms (optional feature); 2000
- Reference Material: Platinum (optional feature); Nickel/Nickel Alloys (optional feature)
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
from ifm efector inc.
Also suitable for small nominal pipe diameters and confined spaces. Very short response time < 0.25 / < 1s. Free 3-point factory certificate available online. Precise analog output and user-friendly communication via IO-Link. Learn more. View other products in this family of sensors. From May... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from United Electric Controls Company
Thermowell and protection tube manufacturer , United Electric Controls creates and designs custom thermowells and protection tubes. UE offers a complete line of sold-bore thermowells and manufactured protection tubes in a variety of materials and constructions. Serving customers worldwide, our... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms (optional feature); 1000 Ohms (optional feature)
- Reference Material: Platinum (optional feature); Nickel/Nickel Alloys (optional feature)
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from ABB Measurement & Analytics
The field-mount temperature transmitter can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD or local HMI (optional). The Field Information Manager (FIM) is also supported via FDI technology. For PROFIBUS the configuration is possible via GST-file, EDD or... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -328 to 1562
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
- Mounting Options: Field Mounted
from Tempco Electric Heater Corporation
The Tempco ETM Series of 2-wire transmitters are offered in isolated, non-isolated and high precision isolated versions. They are designed to fit in a standard aluminum, iron or plastic industrial connection head, DIN size B or larger. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Supply Voltage: 6.5 to 36 VDC
- Sensor Connection: Screw Clamps or Lugs
- Operating Temperature: -40 to 185
from Dataforth Corporation
Each DSCT34 RTD input transmitter provides a single channel of RTD input which is filtered, isolated, amplified, linearized, and converted to a process current output. Signal filtering is accomplished with a five-pole filter, which provides 85dB of normal-mode rejection at 60Hz and 80dB at 50Hz. An... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 212
from Conax Technologies
RTD, TC, Ohm, or mV Input. Extremely High Measurement Accuracy. 1.5 kVAC Galvanic Isolation. Programmable Sensor Error Value. Application: Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 5000 Ohms Max.
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Resistance Inputs
from ifm efector inc.
For use where space is restricted. Very short response time. Free 3-point calibration certificate available online. Precise analog output and user-friendly communication via IO-Link. From May 1st 2025, products produced in EU and Singapore have an import surcharge reflected in the price. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from ABB Measurement & Analytics
The TTH300 is provided for the highest requirements of temperature measurement with two sensor inputs. This supports sensor redundancy and sensor drift monitoring. The transmitter follows NAMUR Recommendations such as NE 89 and NE 107. As an option, an LCD indicator with operating buttons can be... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -328 to 1562
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
- Local Interface: Computer Interface
from Tempco Electric Heater Corporation
The Tempco ETM Series of 2-wire transmitters are offered in isolated, non-isolated and high precision isolated versions. They are designed to fit in a standard aluminum, iron or plastic industrial connection head, DIN size B or larger. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Supply Voltage: 6.5 to 36 VDC
- Sensor Connection: Screw Clamps or Lugs
- Operating Temperature: -40 to 185
from Dataforth Corporation
Each DSCP55 RTD Loop-Powered Converter provides a single channel of RTD input which is amplified, linearized and converted to a high-level 4 to 20mA or 20 to 4mA output. Inputs may be connected by 2, 3, or 4 wires and measurement range may be configured by dip-switch. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1202
from Conax Technologies
Programmable LED Indicator, 2 Relay, Front Key Programmable – Model 5714. * 4-Digit, 14-Segment LED Indicator. * Input for RTD, TC, mA, V, and Potentiometer. * Universal Supply Voltage. * Front Key Programmable. * Available with Optional 2 Relays and Analog Output. Application: * Display for... [See More]
- Output: Analog Current (Typical 4-20 mA); Relay or Switch Output
- Reference Resistance: 10 Ohms; 100 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 20, 50, 250 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
from ifm efector inc.
Hygienic design for the requirements of the food and beverage industry. Fast response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure resistance. Precise analog... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from ABB Measurement & Analytics
The field-mount temperature transmitter TTF200 is provided for all HART standard applications in temperature measurement with one sensor. The transmitter supports the same functionality as the TTF300, but without sensor redundancy and sensor drift monitoring. It can be configured with ABB-tools such... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Mounting Options: Field Mounted
from Tempco Electric Heater Corporation
The Tempco ETR Series of 2-wire transmitters is offered in isolated, non-isolated and high precision isolated versions. They are designed to fit directly on a standard 35 mm DIN rail. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Supply Voltage: 8 to 32 VDC
- Sensor Connection: Screw Clamps or Lugs
- Operating Temperature: -4 to 158
from Dataforth Corporation
Each DSCP61 RTD Pt100 Converter provides a single channel of RTD input which is amplified, linearized and converted to a high-level current or voltage output. Inputs may be connected by 2, 3, or 4 wires and measurement range may be configured by dip-switch to cover a range of –150 °C to... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Mounting Options: DIN Rail Mounting
- Sensed Temperature: -238 to 1202
- Sensor Connection: Screw Clamps or Lugs
from Conax Technologies
Programmable LED Indicator, 4 Relay, Front Key and PC Programmable Model 5715. * 4-Digit, 14-Segment LED Indicator. * Input for RTD, TC, mA, V, and Potentiometer. * 4 Relays with Optional Analog Output. * Universal Supply Voltage. * Programmable via Front Keypad or PC. Application: * Display for... [See More]
- Output: Analog Current (Typical 4-20 mA); Relay or Switch Output
- Reference Resistance: 10 Ohms; 100 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 20, 50, 250 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ABB Measurement & Analytics
The TTH200 is provided for all HART standard applications in temperature measurement with one sensor input. The transmitter follows NAMUR Recommendations such as NE 89 and NE 107. The TTH200 supports the same functionality as the TTH300, but without sensor redundancy and sensor drift monitoring. As... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Mounting Options: Head Mount
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ABB Measurement & Analytics
The TTR200 is a rail-mount version of the TTH200 transmitter with the addition of two indicator LEDs. A green LED indicates that the transmitter is powered. A red LED would indicate a fault in either the unit or the sensor. TTR200 units can be placed in cabinet racks. It can be configured with... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Mounting Options: DIN Rail Mounting
from ifm efector inc.
Hygienic design for the requirements of the food and beverage industry. Fast response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure resistance. User-friendly... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from ifm efector inc.
Hygienic design for the requirements of the food and beverage industry. Fast response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure resistance. User-friendly... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm efector inc.
High precision across the entire temperature measurement range. Fast response dynamics and very short power-on delay time. Robust stainless steel housing with high pressure resistance. High protection rating for the requirements of harsh industrial environments. Precise analog output and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm efector inc.
Hygienic design for the requirements of the food and beverage industry. Fast response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure resistance. User-friendly... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from ifm efector inc.
Hygienic design for the requirements of the food and beverage industry. Fast response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure resistance. User-friendly... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Rotronic Instrument Corp.
Applications. Measures temperatures in production processes, storage, transport and drying processes. Features. • Interchangeable Pt100 probes. • Range of application electronics: -40 …60 °C / 0 …100 %rh; -10 …60 °C with LCD. • Temperature measurement with... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Reference Resistance: 500 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs
from Automation24, Inc.
The iTEMP TMT127 din-rail temperature transmitter from Endress+Hauser is designed for transformation of an RTD Pt100 (2/3/4-wire) sensor signal into a fixed range of measurement. The standardised output signal used for the process measurement is a 4 to 20 mA signal. That means fast, simple and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -328 to 1562
- Reference Material: Platinum
from Transcat, Inc.
Product Highlights. 644 - Smart Temperature Transmitter. H - Head Mount. A - Output: 4-20 mA with Digital Signal Based on HART Protocol. K5 - FM Intrinsic Safety Explosion-Proof Combination. J6 - Enclosure: Universal Head (Junction Box) Aluminum Alloy with 50.8 mm (2-in) SST Pipe Bracket (1/2-14 NPT... [See More]
- Output: Analog Current (Typical 4-20 mA)
from TEGAM, Inc.
High Temperature RH Temperature Transmitter. Duct Mount. 4-20 mA. TEGAM's high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40 °F to 356 °F (-40... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Mounting Options: Wall or Duct Mounted
- Sensed Temperature: -40 to 356
- Features: Waterproof or Sealed Against Moisture
from FineTek
TRX Temperature Transmitter. 。Supply Voltage: Loop Power 18~32 Vdc. 。DCV Input: 0~500 mV/ 0~1V/ 0~5V/ 0~10V/ 0~20V. 。DCA Input: 0~20 mA/ 4~20 mA. 。Thermocouple Input: K / J / T / E / R / S / B / N. 。RTD/ Resistance Input: PT100/0~400W. 。Analog Output: 4~20... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -4 to 140
from Stellar Technology
The Series PT170 is a small, accurate, combination pressuretemperature. transducer for measuring dynamic and static pressuretemperatures. Available in absolute, sealed gage, or true gage zero pressure reference and either an RTD or thermocouple for temperature measurement, the unit is entirely... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
- Sensed Temperature: -320 to 400
- Sensor Connection: Plug or Quick Connect
from Sitron
The robust STD-T Temperature Transmitter in 316 Stainless Steel. The 90 ° mounted display facilitates the process visualization, besides being rotated in 330 ° both the display and the body, making the transmitter very flexible in any installed position. With a 5-digit multifunction LCD... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 392
from R. STAHL, Inc.
One unit for nearly all temperature sensors indivdually configurable. Intrinsically safe input [Ex ia] IIC. Signal duplication possible. Galvanic isolation between input, output, power supply and configuration interface. Open-circuit and short-circuit monitoring and messaging (can be switched off). [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms; ThermoCouple L, U, XK
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3213
from Status Instruments, Inc.
The SEM310 is a field mount temperature transmitter designed to replace the terminal block in a sensor head. It is fully encapsulated to ensure environmental integrity. Although small in size it out performs other larger and more expensive transmitters. Also available in DIN rail mount format... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 3200
from Azbil Corporation
These compact and lightweight smart temperature transmitters receive thermocouple input, RTD input, or mV input and transmit it as a 4 –20 mA DC or degital signal. They can be used with general-purpose signal cables, similar to other transmitters for flow or pressure measurement, eliminating... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs
from Vulcan Electric Co.
The BMN-53 is a fully-scalable head-mount transmitter that is fully-adjustable (via solderlink and precision 20-turn. potentiometers) from O °C/O °F to the full limit of the sensor. Transmitter is a signal conditioner. It accepts a low level signal from a sensor, a millivolt signal from a... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -50 to 400
- Other Input: Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from NOSHOK, Inc.
The NOSHOK 850 Temperature Switch measures and displays temperature and has one or two switching outputs as well as an optional analog output. The temperature set points, reset points, switching functions and the measuring range of the optional analog output are simple to adjust via two buttons. All... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -300 to 1100
from Burkert Fluid Control Systems
This intelligent threshold detector/transmitter with an extra large display is specifically designed to monitor limit values or an ON/OFF or continuous control loop. Two versions are available: the 8400 Compact and 8400 for wall mounting. The wall-mounted version must be inserted into a holder... [See More]
- Output: Analog Current (Typical 4-20 mA); Relay or Switch Output
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -40 to 257
from Durex Industries
Durex offers a two-wire universal head transmitter for installation in our DIN B Terminal Heads. These transmitters are configured by Durex to convert the signal from any type Thermocouple or RTD (2, 3 or 4 wire) into a linearized and isolated 4-20 mA signal. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 1112
from Acrolab Ltd.
Explosion Proof Fixed Element RTD ’s are for use in U.S. and Canadian hazardous areas. They are designed to extinguish flames inside the device eliminating the potential for ignition of ammable mixtures in the surrounding atmosphere. FM and CSA approved assemblies, dependent on connection head... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
from Siemens Process Instrumentation
SITRANS TH100 provides a low-cost alternative for Pt100 measurements and offers economic plant operation and reliable measurements. Setup is quick and easy with the transmitter modem and SIPROM T. This configuration tool can be downloaded for free. Measures temperature with a linear output signal. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
from ifm electronic gmbh
Very fast response time < 0.25 / < 1s. Free 3-point factory certificate available online. High measuring range: -50...200 °C. Precise analogue output and user-friendly communication via IO-Link [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC), 0 to 500 ohms input. 0 to 20mA DC, 0 to 10V DC output. Mechanical relay (25V @ 5A) alarm. 10-36V DC power. Software configured. Performs linearization, square root extraction, and optional limit alarm functions. [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 500 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
from KOBOLD Instruments, Inc.
Product Features. High Accuracy. 4-20 mA Loop Powered. Rugged, All 316 SS Construction. -200 to 600 °C Temperature Range. Custom Designs Available. Accessible Zero & Span. KOBOLD TMA temperature sensor employs a Pt100 class B resistive temperature detector (RTD) combined with an integrated loop... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 1112
from Trafag Inc.
Main Features. Excellent long term stability. Protection IP65. EMC protection. Meets IEC 60571 (railways) [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 752
from Winters Instruments
Description & Features: • A sensitive temperature sensor designed to transmit an electronic signal to a remote location • NEMA4 stainless steel or aluminum head • Platinum element • Various stem lengths available • ±0.12% accuracy • 1 year... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from PR electronics
RTD, TC, Ohm, or mV input. Extremely high measurement accuracy. HART ® 5 protocol. Galvanic isolation. 1- or 2-channel versionng [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Supply Voltage: 8.0...35 VDC
from Ultra Energy
4500H Temp Transmitter, Industrial Temperature Transmitter, Head Mount RTD [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1202
from Alfa Laval Inc.
Temperature transmitters provide accurate and reliable temperature measurement in hygienic and pharmaceutical production. Fast, accurate temperature measurement. Alfa Laval temperature transmitters are compact hygienic measuring devices that provide accurate temperature measurement. Temperature... [See More]
- Output: Analog Current (Typical 4-20 mA); Relay or Switch Output
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Local Interface: Computer Interface
from OMEGA Engineering, Inc.
The CYTX231 temperature transmitters send linearized data to a remote location for a data acquisition system or a recorder using a 4-20 or 0-20mA signal. Standard Curve #10 chart shown in the T section is in memory for the silicon diode sensor and excitation of 10A is provided. The CYTX231P operates... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Other (Tungsten, Silver etc.)
- Sensed Temperature: -457 to 980
from Automation24, Inc.
The iTEMP TMT127-J41NCA din-rail temperature transmitter from Endress+Hauser is designed for transformation of a RTD Pt100 (4-wire) sensor signal into a fixed range of measurement. The standardised output signal used for the process measurement is a 4 to 20 mA signal. That means fast, simple and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 1.4 to 298
from Transcat, Inc.
Product Highlights. 644 - Smart Temperature Transmitter. H - Head Mount. A - Output: 4-20 mA with Digital Signal Based on HART Protocol. K6 - CSA Intrinsic Safety and Explosion –Proof combination (includes standard I.S. and FISCO for Fieldbus units). J6 - Enclosure: Universal Head (Junction... [See More]
- Output: Analog Current (Typical 4-20 mA)
from TEGAM, Inc.
RH Temperature Transmitter. 0-1 V. TEGAM's solution for monitoring relative humidity and temperature, the RHT series provides a linearized output current from 4 mA to 20 mA(model RHT-20C) or a linearized output voltage from 0 V to 1 V DC (model RHT-10V) representing temperature and humidity. [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Mounting Options: Wall Mount
- Sensed Temperature: -4 to 167
- Sensor Connection: Screw Clamps or Lugs
from Stellar Technology
Stellar Technology ’s Series PT17XX transducers combine both a. pressure sensor and temperature sensor in one unique package. The. Series PT17XX is designed with proprietary electronics which provides a. variety of both analog and digital high level outputs. The PT17XX is. constructed of all... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
- Sensed Temperature: -320 to 400
- Sensor Connection: Plug or Quick Connect
from Sitron
The robust STD-T Temperature Transmitter with Aluminum head, provides 4 … 20mA (2-wire) analog current signal with HART communication protocol, making it easy to integrate the instrument into industrial networks. The head-mounted display makes it easy to see the process, as well as being... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 392
from R. STAHL, Inc.
One unit for nearly all temperature sensors indivdually configurable. Signal duplication possible. Galvanic isolation between input, output, power supply and configuration interface. Open-circuit and short-circuit monitoring and messaging (can be switched off). Simple configuration with PC or... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms; ThermoCouple L, U, XK
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3213
from Status Instruments, Inc.
PUSH BUTTON IN HEAD TEMPERATURE TRANSMITTERS. SIMPLE PUSH BUTTON CONFIGURATION. HIGH STABILITY. INPUT/OUTPUT ISOLATION. 4 TO 20 mA TWO WIRE OUTPUT. PROGRAMMABLE BURNOUT. USER PUSH BUTTON TRIM. 10 YEAR WARRANTY [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 120 Ohms; 500 Ohms (optional feature); 1000 Ohms (optional feature)
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3200
from NOSHOK, Inc.
Large 4-digit LED display, Field re-programmable with optional PC interface module and software, Security temper protection for re-programming, 4 mA to 20 mA, programmable linearized signal output, Utilizes self-calibration feature for accurate and stable performance, Optional fully programmable... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -325 to 1100
from Siemens Process Instrumentation
SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt sensors. Setup is quick and easy with the transmitter modem and downloadable SIPROM T software. Measures temperature with a linear output signal. High accuracy across entire ambient temperature range. [See More]
- Output: Analog Current (Typical 4-20 mA)
from ifm electronic gmbh
For use where space is restricted. Very short response time. Free 3-point calibration certificate available online. Precise analogue output and user-friendly communication via IO-Link [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Acromag, Inc.
plusmn;100V or 0 to 22mA DC input ranges (AC current with optional sensor). 0 to 20mA DC, 0 to 10V DC output • Mechanical relay alarm (25V @ 5A) • 10-36V DC power. Software configured, performs linearization, square root extraction, and optional limit alarm functions. The 811T... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Mounting Options: DIN Rail Mounting
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
- Local Interface: Digital Front Panel
from KOBOLD Instruments, Inc.
Product Features. No Features Available [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Difference or average temperature measurement of 2 resistance or TC sensors. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Supply Voltage: 8.0...30 VDC
from Ultra Energy
7600D Temp Transmitter, Industrial Temperature Transmitter, DIN Rail Mount, RTD, T/C, Ω, mV [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
The PRTXB and PRTXAL series are 2-wire transmitters that provide 4 to 20 mA signal representing temperature linearized. The front keypad is used for power on/off, min/max functions, selection of deg F, C or K, auto shutoff times (for battery models), calibration and configuration options. [See More]
- Output: Analog Current (Typical 4-20 mA); Relay or Switch Output
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -72.4 to 738
from Automation24, Inc.
The iTEMP TMT187 temperature transmitter from Endress+Hauser is designed for transformation of an RTD Pt100 sensor signal into a fixed range of measurement. The standardised output signal used for the process measurement is a 4 to 20 mA signal. That means fast, simple and reliable measurement values... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -328 to 1562
- Reference Material: Platinum
from Transcat, Inc.
Product Highlights. 644 - Smart Temperature Transmitter. H - Head Mount. A - Output: 4-20 mA with Digital Signal Based on HART Protocol. E5 - FM Explosion –Proof. J6 - Universal Head (junction box), aluminum alloy with 50.8 mm (2-in.) SST pipe bracket (1/2 –14 NPT entries) [See More]
- Output: Analog Current (Typical 4-20 mA)
from TEGAM, Inc.
RH Temperature Transmitter and Probe. Stainless Steel Duct. 0-10V. TEGAM's Humitran duct probes provide a reliable, accurate, and low cost method for monitoring relative humidity plus temperature. Solid state sensors supply excellent sensitivity, fast response and long term stability. Simple hook up... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Mounting Options: Wall or Duct Mounted
- Sensed Temperature: 32 to 212
- Features: Waterproof or Sealed Against Moisture
from Sitron
The ST20 transmitter is all made of 316 stainless steel. Robust and compact in low space environments, it is available with 4 … 20mA (2 wire) output ideal for working at high temperature up to 600 ° C with excellent accuracy and stability. This model has no local Zero & Span... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 1112
from Status Instruments, Inc.
INTRODUCTION. The SEM1605P is the next generation DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common RTD temperature sensor inputs and provide the user with a standard two-wire 4 to 20mA output signal. All temperature ranges are linear to... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 120 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 1562
from NOSHOK, Inc.
High accuracy (±0.1%), 2-wire loop-powered 4 mA to 20 mA output, Linearized output to temperature, Input RTD PT100 with 3-wire compensation, Analog design, potentiometer adjustable, Factory calibrated for fixed range, Metal housing, Fits standard heads, Optional model is fully field re-programmable... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc) (optional feature)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensor Connection: Terminal Block
from Siemens Process Instrumentation
SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and millivolt sensors. Setup is quick and easy with the transmitter modem and downloadable SIPROM T software. Measures temperature with a linear output signal. Consistent performance - high accuracy across entire ambient... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Operating Temperature: -40 to 185
from ifm electronic gmbh
Hygienic design for the requirements of the food and beverage industry. Particularly good response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure rating. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Acromag, Inc.
0 to 50KHz, 0 to 65535 pulses input. 0 to 20mA DC, 0 to 10V DC output. Mechanical alarm relay (25V @ 5A). 10-36V DC power. Software configured; pulse counter; signal averaging; optional limit alarm functions. Acromag's IntelliPack ® series is a family of high-performance, multi-function I/O... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc); Relay or Switch Output
- Mounting Options: DIN Rail Mounting
- Other Input: Accepts Other Specific Sensor Inputs
- Local Interface: Digital Front Panel
from KOBOLD Instruments, Inc.
Product Features. For Liquids or Gases in Pipes. Pt-100 RTD or 4-20 mA Output. 1/4 â € to 1-1/2 â € Pipe Sizes. Temperature Ranges -40 to +300 °F. Brass or Stainless Steel Housings. Simple and Reliable. The series TSP temperature sensors are ideal for temperature... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -40 to 300
from PR electronics
Application. Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100. HART ® communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors. Conversion of linear resistance to a standard... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Mounting Options: DIN Rail Mounting
from Ultra Energy
7600H Temp Transmitter, Industrial Temperature Transmitter, Head Mount, RTD, T/C, Ω, mV [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
The TXDIN101 is a computerized, PC programmable, galvanically isolated two-wire smart transmitter. The unit converts 13 types of thermocouple sensors; 12 types of RTD sensors, configured as 2-, 3- and 4-wires; potentiometer, resistor and millivolt inputs, single or differential into process current... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
from Automation24, Inc.
The transmitter iTEMP TMT80-AA from Endress+Hauser is configurable and supports both selected resistance thermometers and thermocouples. To achieve high measurement accuracy, linearisation characteristics are stored for each type of sensor. The standardised output signal for this is the 4 to 20 mA... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 212
from Transcat, Inc.
Product Highlights. 644 - Smart Temperature Transmitter. H - Head Mount. A - Output: 4-20 mA with Digital Signal Based on HART Protocol. I1 - ATEX Intrinsic Safety. XA - Sensor specified separately and assembled to transmitter. R2. EL - External label for ATEX Intrinsic Safety [See More]
- Output: Analog Current (Typical 4-20 mA)
from Sitron
The ST90A Temperature Transmitter with Aluminum head is available in 4 … 20mA (2 wire) no moving parts with reliable and accurate measurement. The electronic module with microprocessed technology has Zero & Span adjustment and can be re-calibrated for a new measurement range within its... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 392
from Status Instruments, Inc.
INTRODUCTION. The SEM206TH is a “smart ” in head transmitter that accepts thermistor temperature sensors and converts sensor output over a configured range to a standard industrial 4 to 20mA transmission signal. The output signal is linear to temperature. A variety of thermistor types... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensor Connection: Screw Clamps or Lugs
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
- Supply Voltage: 10 to 30 VDC
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from Acromag, Inc.
100 ohm Pt RTD or 0-900 ohm input. 4-20mA output (sink/source). 12-32V DC loop/local power. USB configuration. The TT231 model is a space-saving two-wire transmitter that converts a 100 ohm Platinum RTD sensor input to a proportional 4-20mA signal. Power is received from the output loop current or a... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Resistance Inputs
from PR electronics
Application. Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100. HART ® communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors. Conversion of linear resistance to a standard... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Mounting Options: DIN Rail Mounting
from Ultra Energy
9100D Temp Transmitter, Industrial Temperature Transmitter, DIN Rail Mount, RTD, T/C, Ω, mV, HART [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
It provides 2 channels of configurable inputs, and supports multiple voltage, RTD, thermocouple inputs with auto reference junction compensation. If parallel connected to an external precise resistance, it accepts current signal input. Each channel has its own digital filtering and can adjust its... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 50 Ohm
- Reference Material: Platinum; Copper
- Sensed Temperature: -328 to 4172
from Automation24, Inc.
The Pt100 temperature transmitter Easytemp TMR31-A1BBABAB1AAA from Endress+Hauser has an analog output of 4 –20 mA. The temperature transmitter with high IP67/IP68/IP69K protection rating has an installation length of 2" (50 mm) and a measurement range of 32-302 °F (0-150 °C). The... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 302
from Sitron
The ST90A Temperature Transmitter with Nylon head is available in 4 … 20mA (2 wire) or 0 … 10V (3 wire) versions. Both models offer a compact form without moving parts with reliable and accurate measurement. The electronic module with microprocessed technology has Zero & Span... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 392
from Status Instruments, Inc.
The SEM210 is a second generation ‘Smart ’ in head temperature transmitter that accepts any commonly used temperature sensor, Slidewire transducer or Millivolt signal and converts the output to the industry standard 4-20 mA transmission signal. The sensor type and range are easily... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 3200
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from Acromag, Inc.
DT330 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT335 model is a four-wire dual transmitter that isolates and converts RTD or linear resistance sensor inputs to proportional control signals. Each channel supports DC current or voltage output. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 0-4500 ohm
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Mounting Options: DIN Rail Mounting
from PR electronics
Advanced features. The 5131A transmitter can be configured with the software program PReset using a standard PC and the Loop Link communications unit. Application. Independent channel jumper selectable inputs for current/voltage or temperature. Current input programmable in range 0...100 mA and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Mounting Options: DIN Rail Mounting
from Ultra Energy
9100H Temp Transmitter, Industrial Temperature Transmitter, Head Mount, RTD, T/C, Ω, mV, HART [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
TX900 Series transmitters feature dip switch selection of input type and range. The following models are available: TX901 (non-isolated, accepts J, K,T, E, R or S thermocouples); TX903 (isolated, accepts J, K, T, E, R or S thermocouples; TX904 (non-isolated, accepts 100 ohm Pt RTD's 2- or 3- wire);... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs
from Automation24, Inc.
The Pt100 temperature transmitter Easytemp TMR31-A1BBACAA1AAA from Endress+Hauser has an analog output of 4 –20 mA. The temperature transmitter with high IP67/IP68/IP69K protection rating has an installation length of 1.25" (30 mm) and a measurement range of 32-302 °F (0-150 °C). The... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 302
from Sitron
This model is specially designed to meet temperatures up to 250 ° C. For this, a extended neck for heat dissipation with 3 types of configuration is made in its body: MT for medium temperature up to 120 ° C, AT for temperature of 150 ° C and HT for temperature up to 250 ° C. The... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 482
from Status Instruments, Inc.
INTRODUCTION. The TTR200 & TTC200 are cost effective “smart ” in head temperature transmitters that accept RTD/Slide Wire or Thermocouple/mV inputs and converts them to a standard loop powered industrial 4 to 20mA transmission signal over a userprogrammed range. Two versions are... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 53, 507.5, 604 Ohm
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 1532
from ifm electronic gmbh
Hygienic design for the requirements of the food and beverage industry. Particularly good response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure rating. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Acromag, Inc.
DT230 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT235 model is a two-wire dual transmitter that isolates and converts RTD or linear resistance sensor inputs to a proportional 4-20mA control signal. Power is received from the output loop... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 0-4500 ohm
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Mounting Options: DIN Rail Mounting
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Amplification of a bipolar mV signal to a standard 4...20 mA current... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensor Connection: Screw Clamps or Lugs
from Ultra Energy
The Nuclear Qualified Model N7030 & 7040 Analog Temperature Transmitter has many outstanding features which make it the perfect transmitter for Critical Measurements & Safety Instrumentation. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 200 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
The HX300 Series Transmitter is designed for industrial environments requiring fast, stable and accurate measurements. It utilizes a highly stable thin film polymer capacitor to sense relative humidity, and a high accuracy thin film RTD to accurately sense temperature. [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 212
from Automation24, Inc.
The Pt100 temperature transmitter Easytemp TMR31-A1BBACAB1AAA from Endress+Hauser has an analog output of 4 –20 mA. The temperature transmitter with high IP67/IP68/IP69K protection rating has an installation length of 2" (50 mm) and a measurement range of 32-302 °F (0-150 °C). The... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 302
from Sitron
The ST90 transmitter is made entirely of 316 stainless steel. Robust and compact in low space environments, it is available with 4 … 20mA (2 wire) output with excellent accuracy and stability. This model has no local Zero & Span adjustment and is factory calibrated for the measurement... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -148 to 392
from Status Instruments, Inc.
RTD / slide wire / Ohms or thermocouple / mV inputs. Configuration using USB port powered configurator. Custom sensors accommodated. 22 segment user linearization for input. Sensor offset and output alignment. Programmable sensor burnout. High long term stability. Intrinsically safe versions... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 120 Ohms; 500 Ohms; 1000 Ohms; 53, 507.5, 604 Ohm
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3272
from ifm electronic gmbh
Hygienic design for the requirements of the food and beverage industry. Particularly good response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure rating. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Acromag, Inc.
Selectable RTD or linear resistance input type or 0-500 ohm input. Universal output (source). 12-32V DC local/bus power. USB configuration. The TT335 model is a space-saving four-wire transmitter that isolates and converts an RTD sensor input to a proportional control signal. DC current and voltage... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 0-450 ohm
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Amplification of a bipolar mV signal to a standard 4...20 mA current... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensor Connection: Screw Clamps or Lugs
from OMEGA Engineering, Inc.
The FMA1000 Series industrial air velocity/ temperature transmitter/indicator measures and displays air velocity as well as air temperature in research and development labs, HVAC applications, and other manufacturing processes. The sensor design is based on three RTD elements, one measures air... [See More]
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Sensed Temperature: -40 to 340
- Reference Resistance: 100 Ohms; 1000 Ohms
- Local Interface: Digital Front Panel; Computer Interface
from Automation24, Inc.
The Pt100 temperature transmitter Easytemp TMR35-A1BBDBAA2AAA from Endress+Hauser has an analog output of 4 –20 mA. The temperature transmitter with high IP67/IP68/IP69K protection rating has an installation length of 1.25" (30 mm) and a measurement range of 32-302 °F (0-150 °C). The... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 302
from Status Instruments, Inc.
INTRODUCTION. The SEM710 is the first of a new generation of head mounted temperature transmitters with a display from Status Instruments. It has been designed to accept most common temperature sensor inputs and provide the user with a standard two wire 4 to 20 mA output signal. Isolation is... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -328 to 3200
- Reference Material: Platinum
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from ifm electronic gmbh
Hygienic design for the requirements of the food and beverage industry. Particularly good response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure rating. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from Acromag, Inc.
100 ohm Pt, 120 ohm Ni, 10 ohm Cu (selectable type) input. 4 to 20mA DC output. 12-50V DC from output loop power. DIP-switch configuration, push-button calibration. These units accept universal RTD or resistance input signals and output proportional DC current signals. The output can also be... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Resistance Inputs
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000 or Ni100...Ni1000 sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Technical characteristics. Within a few seconds the user can program PR5333A... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensor Connection: Screw Clamps or Lugs
from OMEGA Engineering, Inc.
Unmatched Electrical Performance. Two-wire Operation Power is obtained directly from the 4 to 20 mA loop, with no need for separate power input. This simplifies field wiring and eliminates the possibility of noise pickup from power lines. Isolation to 1500 V rms (2100 Vp). This exceptionally high... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms (optional feature)
- Reference Material: Platinum (optional feature)
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
from Automation24, Inc.
The Pt100 temperature transmitter Easytemp TMR35-A1BBDBAB2AAA from Endress+Hauser has an analog output of 4 –20 mA. The temperature transmitter with high IP67/IP68/IP69K protection rating has an installation length of 2" (50 mm) and a measurement range of 32-302 °F (0-150 °C). The... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: 32 to 302
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from Acromag, Inc.
Big, bright display. 4-20mA, ±10V, thermocouple, or RTD input. 4-20mA, Modbus serial, or alarm relay output options. Acromag VPM3000 Vertu ™ digital panel meters are among the most versatile on the market and able to operate as a transmitter and/or alarm to satisfy a wide variety of... [See More]
- Output: Analog Current (Typical 4-20 mA); Relay or Switch Output (optional feature)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Mounting Options: DIN Rail Mounting
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000 or Ni100...Ni1000 sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Technical characteristics. Within a few seconds the user can program PR5333D... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensor Connection: Screw Clamps or Lugs
from OMEGA Engineering, Inc.
The non-isolated TX90A Series transmitters convert thermocouple or RTD signals into a 4 to 20 mA dc signal output that is directly referenced to the mV input of a thermocouple or resistance of a 100 Ohm platinum RTD. For thermocouple transmitters, the 4 to 20mA output is not linearized. T/C... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -40 to 1000
- Reference Resistance: 100 Ohms
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from Automation24, Inc.
The Pt100 temperature transmitter iTHERM TM311 from Endress+Hauser has an analog output of 4 –20 mA or a NO/NC switching output. The temperature transmitter with high IP69 protection rating has an installation length of 20-600 mm, measurement range: (-50-200 °C). The special construction... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: -58 to 392
- Reference Material: Platinum
- Supply Voltage: See configurator
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Amplification of a bipolar mV signal to a standard 4...20 mA current... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Supply Voltage: 7.2...35 VDC
from OMEGA Engineering, Inc.
Loop Powered! The OMEGA ® 2-wire SPRTX-SS Series temperature transmitters are high-performance, low-cost, industrial transmitters designed for direct connection to most CIP (clean-in-place) sanitary Pt100 probes and sensors that incorporate a M12 style connection. All models feature an... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -146 to 1056
from Automation24, Inc.
The Pt100 temperature transmitter iTHERM TM311-CAC0BC2CBB4A2 from Endress+Hauser has an analog output of 4 –20 mA. The temperature transmitter with high IP67/IP68/IP69K protection rating has an installation length of 1.25" (30 mm), measurement range of -58-392 °F (-50-200 °C) and... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Amplification of a bipolar mV signal to a standard 4...20 mA current... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Supply Voltage: 7.2...30 VDC
from OMEGA Engineering, Inc.
The economical OMEGA TX91 and TX92 two-wire transmitters provide an output current of 4-20 mA proportional to the mV signal of a thermocouple or to a two- or three-wire RTD sensor input. The TX91 or TX92 is very compact and can mount directly within OMEGA's NB1 cast iron protection head. By having... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
- Sensed Temperature: -40 to 1000
- Sensor Connection: Screw Clamps or Lugs
from Automation24, Inc.
The temperature transmitter TA2105 - TA-025CLER14-A-ZVG/US from ifm efector has an analog output of 4-20 mA. The temperature transmitter with a superior protection rating of IP67/IP68/IP69K has an installation length of 25 mm and a measuring range of Measuring range -50-150 °C, which can be... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000 or Ni100...Ni1000 sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Technical characteristics. Within a few seconds the user can program PR6333A... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Supply Voltage: 8.0...35 VDC
from OMEGA Engineering, Inc.
Models TX93, TX94 and TX95 transmitters can eliminate long runs of costly field wiring in a variety of applications. A stable 4 to 20 mA output signal is provided proportional to the transmitters specific input type and calibrated temperature range (see Range Code Table below). Adjustability of 25%... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
- Sensed Temperature: -0.4000 to 500
- Sensor Connection: Screw Clamps or Lugs
from Automation24, Inc.
The temperature transmitter TA2303 from ifm electronic has an analog output of 4-20 mA. The temperature transmitter with protection rating of IP67/IP68/IP69K has an installation length of 30 mm and a measuring range of -58-302 °F and a factory setting: 0-300 °F, which can be adjusted via... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm electronic gmbh
High precision across the entire temperature measurement range. Particularly good response dynamics and very short power-on delay time. Robust stainless steel housing with very high pressure rating. High protection rating for the requirements of harsh industrial environments. Precise analogue output... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000 or Ni100...Ni1000 sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Technical characteristics. Within a few seconds the user can program PR6333B... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Supply Voltage: 8.0...30 VDC
from OMEGA Engineering, Inc.
The TX12 head mounted temperature transmitter connects to any standard pt100 resistance sensor and converts the linearized temperature to a 4 to 20 mA signal. The transmitter is a two wire device, and is fully configurable by the user, over a wide temperature range, with the aid of a simple push... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -328 to 1562
from Automation24, Inc.
The temperature transmitter TA2313 from ifm electronic has an analog output of 4-20 mA. The temperature transmitter with the high protection rating of IP67/IP68/IP69K has an installation length of 50 mm. TA2313 also offers a measuring range of -58-302 °F and a factory setting od 0-300 °F,... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 302
from ifm electronic gmbh
Hygienic design for the requirements of the food and beverage industry. Particularly good response dynamics and very short power-on delay time. High precision across the entire temperature measurement range. Robust stainless steel housing with high protection rating and high pressure rating. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 1000 Ohms
- Reference Material: Platinum
- Sensed Temperature: -58 to 392
from PR electronics
Application. Electronic temperature measurement in for instance control rooms, offices, heating plants, factories, living rooms, and similar dry rooms. Suitable as a transmitter for controllers, trip amplifiers, displays, or superior SCADA systems. Technical characteristics. A precision Pt100 sensor... [See More]
- Output: Analog Current (Typical 4-20 mA)
- Operating Temperature: 32 to 158
- Supply Voltage: 8.0...35 VDC
from OMEGA Engineering, Inc.
The economical OMEGA TX92G transmitter provides an output current of 4-20 mA proportional to the mV signal of a two wire RTD sensor input. The TX92G is very compact and mounts directly with OMEGA's NB1 cast iron protection heads. [See More]
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Sensed Temperature: -40 to 1000