DIN Rail Mounting RTD Temperature Transmitters
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 50 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3308
from ABB Measurement & Analytics
The TTR200 is a rail-mount version of the TTH200 transmitter with the addition of two indicator LEDs. A green LED indicates that the transmitter is powered. A red LED would indicate a fault in either the unit or the sensor. TTR200 units can be placed in cabinet racks. It can be configured with... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Output: Analog Current (Typical 4-20 mA)
from Conax Technologies
RTD, TC, Ohm, or mV Input. Extremely High Measurement Accuracy. HART ® Communication. Complies with European ATEX, and CSA/FM Requirements for Hazardous Location Installation. 1- or 2-Channel Version. Application: Linearized temperature measurement with Pt 100...Pt 1000, Ni100...Ni1000, or TC... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 7000 Ohms Max.
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Resistance Inputs
from Dataforth Corporation
Each DSCP55 RTD Loop-Powered Converter provides a single channel of RTD input which is amplified, linearized and converted to a high-level 4 to 20mA or 20 to 4mA output. Inputs may be connected by 2, 3, or 4 wires and measurement range may be configured by dip-switch. [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1202
from Dataforth Corporation
Each DSCP61 RTD Pt100 Converter provides a single channel of RTD input which is amplified, linearized and converted to a high-level current or voltage output. Inputs may be connected by 2, 3, or 4 wires and measurement range may be configured by dip-switch to cover a range of –150 °C to... [See More]
- Mounting Options: DIN Rail Mounting
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Sensed Temperature: -238 to 1202
- Sensor Connection: Screw Clamps or Lugs
from West Control Solutions
The microprocessor-controlled KS 816 controller provides precise, low-cost multi-loop control of temperature and features an interface for bus or field-bus. The KS 816 can be used as a freely configurable field-bus transmitter with universal inputs for standard signals, thermocouples and Pt 100... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
from PR electronics
Application. Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100. HART ® communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors. Conversion of linear resistance to a standard... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC), 0 to 500 ohms input. 0 to 20mA DC, 0 to 10V DC output. Mechanical relay (25V @ 5A) alarm. 10-36V DC power. Software configured. Performs linearization, square root extraction, and optional limit alarm functions. [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 500 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
from Ultra Energy
7600D Temp Transmitter, Industrial Temperature Transmitter, DIN Rail Mount, RTD, T/C, Ω, mV [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
from Status Instruments, Inc.
INTRODUCTION. The SEM1605P is the next generation DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common RTD temperature sensor inputs and provide the user with a standard two-wire 4 to 20mA output signal. All temperature ranges are linear to... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 120 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
Models DRA-TCI-2 and DRA-RTI-2 are linearized temperature transmitters that produce a 4-20 mA process signal that is directly proportional to temperature. These transmitters have exceptionally high input to output common mode rejection (CMR), a high degree of filtering that eliminates false output... [See More]
- Mounting Options: DIN Rail Mounting
- Output: Analog Current (Typical 4-20 mA)
- Sensed Temperature: 32 to 3092
- Supply Voltage: 10-40 Vdc
from R. STAHL, Inc.
One unit for nearly all temperature sensors indivdually configurable. Intrinsically safe input [Ex ia] IIC. Signal duplication possible. Galvanic isolation between input, output, power supply and configuration interface. Open-circuit and short-circuit monitoring and messaging (can be switched off). [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms; ThermoCouple L, U, XK
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3213
from PR electronics
Application. Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100. HART ® communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors. Conversion of linear resistance to a standard... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
from Acromag, Inc.
plusmn;100V or 0 to 22mA DC input ranges (AC current with optional sensor). 0 to 20mA DC, 0 to 10V DC output • Mechanical relay alarm (25V @ 5A) • 10-36V DC power. Software configured, performs linearization, square root extraction, and optional limit alarm functions. The 811T... [See More]
- Mounting Options: DIN Rail Mounting
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc)
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
- Local Interface: Digital Front Panel
from Ultra Energy
9100D Temp Transmitter, Industrial Temperature Transmitter, DIN Rail Mount, RTD, T/C, Ω, mV, HART [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
from OMEGA Engineering, Inc.
The TXDIN101 is a computerized, PC programmable, galvanically isolated two-wire smart transmitter. The unit converts 13 types of thermocouple sensors; 12 types of RTD sensors, configured as 2-, 3- and 4-wires; potentiometer, resistor and millivolt inputs, single or differential into process current... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms
- Reference Material: Platinum
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
from R. STAHL, Inc.
One unit for nearly all temperature sensors indivdually configurable. Signal duplication possible. Galvanic isolation between input, output, power supply and configuration interface. Open-circuit and short-circuit monitoring and messaging (can be switched off). Simple configuration with PC or... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms; ThermoCouple L, U, XK
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3213
from PR electronics
Advanced features. The 5131A transmitter can be configured with the software program PReset using a standard PC and the Loop Link communications unit. Application. Independent channel jumper selectable inputs for current/voltage or temperature. Current input programmable in range 0...100 mA and... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
from Acromag, Inc.
0 to 50KHz, 0 to 65535 pulses input. 0 to 20mA DC, 0 to 10V DC output. Mechanical alarm relay (25V @ 5A). 10-36V DC power. Software configured; pulse counter; signal averaging; optional limit alarm functions. Acromag's IntelliPack ® series is a family of high-performance, multi-function I/O... [See More]
- Mounting Options: DIN Rail Mounting
- Output: Analog Current (Typical 4-20 mA); Analog Voltage (e.g. 1-5 Vdc); Relay or Switch Output
- Other Input: Accepts Other Specific Sensor Inputs
- Local Interface: Digital Front Panel
from OMEGA Engineering, Inc.
It provides 2 channels of configurable inputs, and supports multiple voltage, RTD, thermocouple inputs with auto reference junction compensation. If parallel connected to an external precise resistance, it accepts current signal input. Each channel has its own digital filtering and can adjust its... [See More]
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 50 Ohm
- Reference Material: Platinum; Copper
- Sensed Temperature: -328 to 4172