Nickel / Nickel Alloys RTD Temperature Transmitters
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3308
- Reference Resistance: 100 Ohms; 50 Ohms
- Mounting Options: DIN Rail Mounting
from RS Components, Ltd.
digital, programmable transmitter for Pt [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Operating Temperature: -40 to 185
- Reference Resistance: 100 Ohms; 1000 Ohms; Ni100, Pt100, Pt1000
from Conax Technologies
RTD, TC, Ohm, or mV Input. Extremely High Measurement Accuracy. HART ® Communication. Complies with European ATEX, and CSA/FM Requirements for Hazardous Location Installation. 1- or 2-Channel Version. Application: Linearized temperature measurement with Pt 100...Pt 1000, Ni100...Ni1000, or TC... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Resistance Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 7000 Ohms Max.
- Sensed Temperature: -328 to 4172
from Dataforth Corporation
Each DSCT34 RTD input transmitter provides a single channel of RTD input which is filtered, isolated, amplified, linearized, and converted to a process current output. Signal filtering is accomplished with a five-pole filter, which provides 85dB of normal-mode rejection at 60Hz and 80dB at 50Hz. An... [See More]
- Reference Material: Nickel/Nickel Alloys
- Sensed Temperature: 32 to 572
- Reference Resistance: 120 Ohms
- Mounting Options: Modular
from Conax Technologies
RTD, TC, Ohm, or mV Input. Extremely High Measurement Accuracy. 1.5 kVAC Galvanic Isolation. Programmable Sensor Error Value. Application: Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Resistance Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 5000 Ohms Max.
- Sensed Temperature: -328 to 4172
from Dataforth Corporation
Each DSCP55 RTD Loop-Powered Converter provides a single channel of RTD input which is amplified, linearized and converted to a high-level 4 to 20mA or 20 to 4mA output. Inputs may be connected by 2, 3, or 4 wires and measurement range may be configured by dip-switch. [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1202
- Reference Resistance: 100 Ohms
- Mounting Options: DIN Rail Mounting
from Conax Technologies
Programmable LED Indicator, 2 Relay, Front Key Programmable – Model 5714. * 4-Digit, 14-Segment LED Indicator. * Input for RTD, TC, mA, V, and Potentiometer. * Universal Supply Voltage. * Front Key Programmable. * Available with Optional 2 Relays and Analog Output. Application: * Display for... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 20, 50, 250 Ohms
- Sensed Temperature: -328 to 4172
from Conax Technologies
Programmable LED Indicator, 4 Relay, Front Key and PC Programmable Model 5715. * 4-Digit, 14-Segment LED Indicator. * Input for RTD, TC, mA, V, and Potentiometer. * 4 Relays with Optional Analog Output. * Universal Supply Voltage. * Programmable via Front Keypad or PC. Application: * Display for... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 20, 50, 250 Ohms
- Sensed Temperature: -328 to 4172
from PR electronics
RTD, TC, Ohm, or mV input. Extremely high measurement accuracy. HART ® 5 protocol. Galvanic isolation. 1- or 2-channel versionng [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms; 1000 Ohms
- Supply Voltage: 8.0...35 VDC
from Ultra Energy
4500H Temp Transmitter, Industrial Temperature Transmitter, Head Mount RTD [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1202
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Output: Analog Current (Typical 4-20 mA)
from Status Instruments, Inc.
PUSH BUTTON IN HEAD TEMPERATURE TRANSMITTERS. SIMPLE PUSH BUTTON CONFIGURATION. HIGH STABILITY. INPUT/OUTPUT ISOLATION. 4 TO 20 mA TWO WIRE OUTPUT. PROGRAMMABLE BURNOUT. USER PUSH BUTTON TRIM. 10 YEAR WARRANTY [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3200
- Reference Resistance: 100 Ohms; 120 Ohms; 500 Ohms (optional feature); 1000 Ohms (optional feature)
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from OMEGA Engineering, Inc.
The TX86 is a 2-wire Loop-Powered, Galvanic-Isolated, Programmable Universal Input Temperature Transmitter that is designed to be head-mounted, but can be standalone as well. It uses 16 bits A/D and D/A converters offering high accuracy with Linearized 4 to 20 mA or 20 to 4 mA outputs. Being a... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Sensed Temperature: -328 to 3272
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC), 0 to 500 ohms input. 0 to 20mA DC, 0 to 10V DC output. Mechanical relay (25V @ 5A) alarm. 10-36V DC power. Software configured. Performs linearization, square root extraction, and optional limit alarm functions. [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 500 Ohms
- Sensed Temperature: -382 to 1562
from R. STAHL, Inc.
One unit for nearly all temperature sensors indivdually configurable. Intrinsically safe input [Ex ia] IIC. Signal duplication possible. Galvanic isolation between input, output, power supply and configuration interface. Open-circuit and short-circuit monitoring and messaging (can be switched off). [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3213
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms; ThermoCouple L, U, XK
- Mounting Options: DIN Rail Mounting
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Difference or average temperature measurement of 2 resistance or TC sensors. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Supply Voltage: 8.0...30 VDC
from Ultra Energy
7600D Temp Transmitter, Industrial Temperature Transmitter, DIN Rail Mount, RTD, T/C, Ω, mV [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Mounting Options: DIN Rail Mounting
from Status Instruments, Inc.
INTRODUCTION. The SEM1605P is the next generation DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common RTD temperature sensor inputs and provide the user with a standard two-wire 4 to 20mA output signal. All temperature ranges are linear to... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 1562
- Reference Resistance: 100 Ohms; 120 Ohms
- Mounting Options: DIN Rail Mounting
from Acromag, Inc.
Selectable RTD or linear resistance input type or 0-500 ohm input. 4-20mA output (sink/source). 12-32V DC loop/local power. USB configuration. The TT235 model is a space-saving two-wire transmitter that isolates and converts an RTD sensor input to a proportional 4-20mA signal. Power is received from... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 0-450 ohm
- Sensed Temperature: 392 to 1562
from R. STAHL, Inc.
One unit for nearly all temperature sensors indivdually configurable. Signal duplication possible. Galvanic isolation between input, output, power supply and configuration interface. Open-circuit and short-circuit monitoring and messaging (can be switched off). Simple configuration with PC or... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 3213
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms; ThermoCouple L, U, XK
- Mounting Options: DIN Rail Mounting
from PR electronics
Application. Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100. HART ® communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors. Conversion of linear resistance to a standard... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Output: Analog Current (Typical 4-20 mA)
from Ultra Energy
7600H Temp Transmitter, Industrial Temperature Transmitter, Head Mount, RTD, T/C, Ω, mV [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Output: Analog Current (Typical 4-20 mA)
from Status Instruments, Inc.
INTRODUCTION. The TTR200 & TTC200 are cost effective “smart ” in head temperature transmitters that accept RTD/Slide Wire or Thermocouple/mV inputs and converts them to a standard loop powered industrial 4 to 20mA transmission signal over a userprogrammed range. Two versions are... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 1532
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 53, 507.5, 604 Ohm
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from Acromag, Inc.
DT330 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT335 model is a four-wire dual transmitter that isolates and converts RTD or linear resistance sensor inputs to proportional control signals. Each channel supports DC current or voltage output. [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 0-4500 ohm
- Output: Analog Current (Typical 4-20 mA)
from PR electronics
Application. Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100. HART ® communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors. Conversion of linear resistance to a standard... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms; 120 Ohms; 200 Ohms; 500 Ohms; 1000 Ohms
- Output: Analog Current (Typical 4-20 mA)
from Ultra Energy
9100D Temp Transmitter, Industrial Temperature Transmitter, DIN Rail Mount, RTD, T/C, Ω, mV, HART [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Mounting Options: DIN Rail Mounting
from Status Instruments, Inc.
RTD / slide wire / Ohms or thermocouple / mV inputs. Configuration using USB port powered configurator. Custom sensors accommodated. 22 segment user linearization for input. Sensor offset and output alignment. Programmable sensor burnout. High long term stability. Intrinsically safe versions... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Sensed Temperature: -328 to 3272
- Reference Resistance: 100 Ohms; 120 Ohms; 500 Ohms; 1000 Ohms; 53, 507.5, 604 Ohm
- Mounting Options: Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style)
from Acromag, Inc.
DT230 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT235 model is a two-wire dual transmitter that isolates and converts RTD or linear resistance sensor inputs to a proportional 4-20mA control signal. Power is received from the output loop... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 500 Ohms; 1000 Ohms; 0-4500 ohm
- Output: Analog Current (Typical 4-20 mA)
from PR electronics
Advanced features. The 5131A transmitter can be configured with the software program PReset using a standard PC and the Loop Link communications unit. Application. Independent channel jumper selectable inputs for current/voltage or temperature. Current input programmable in range 0...100 mA and... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Mounting Options: DIN Rail Mounting
- Reference Resistance: 100 Ohms
- Output: Analog Current (Typical 4-20 mA)
from Ultra Energy
9100H Temp Transmitter, Industrial Temperature Transmitter, Head Mount, RTD, T/C, Ω, mV, HART [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Sensed Temperature: -328 to 1562
- Reference Resistance: 100 Ohms; 500 Ohms; 1000 Ohms
- Output: Analog Current (Typical 4-20 mA)
from Acromag, Inc.
Selectable RTD or linear resistance input type or 0-500 ohm input. Universal output (source). 12-32V DC local/bus power. USB configuration. The TT335 model is a space-saving four-wire transmitter that isolates and converts an RTD sensor input to a proportional control signal. DC current and voltage... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Analog Voltage Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms; 200 Ohms; 400 Ohms; 0-450 ohm
- Sensed Temperature: 392 to 1562
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Amplification of a bipolar mV signal to a standard 4...20 mA current... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Sensor Connection: Screw Clamps or Lugs
from Acromag, Inc.
100 ohm Pt, 120 ohm Ni, 10 ohm Cu (selectable type) input. 4 to 20mA DC output. 12-50V DC from output loop power. DIP-switch configuration, push-button calibration. These units accept universal RTD or resistance input signals and output proportional DC current signals. The output can also be... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys; Copper
- Other Input: Accepts Generic Resistance Inputs
- Reference Resistance: 10 Ohms; 100 Ohms; 120 Ohms
- Sensed Temperature: -328 to 1562
from PR electronics
Application. Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor. Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors. Amplification of a bipolar mV signal to a standard 4...20 mA current... [See More]
- Reference Material: Platinum; Nickel/Nickel Alloys
- Output: Analog Current (Typical 4-20 mA)
- Reference Resistance: 100 Ohms
- Sensor Connection: Screw Clamps or Lugs