Aluminum Titanium Nitride (AlTiN) Milling Cutters
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.031
from SCT - Scientific Cutting Tools, Inc.
Corner Rounding End Mills have three flutes and are double ended to provide maximum value. The cutter diameter and the cut depth are held to ±0.001 inch tolerance to provide ease of set-up. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Endmill
- Units: Fractional
from SwiftCARB
Six flute finishing end mills, single end- 60 ° helix [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square; Radius (optional feature)
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Melin Tool Company
Helps to save on tooling costs versus using larger taps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.031
from SCT - Scientific Cutting Tools, Inc.
The 15 ° helical flute thread mills are non-crest cutting for internal threads only. The helical flute distributes the side cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional; Metric
from Melin Tool Company
Helps to save on tooling costs versus using larger taps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Contour360º
4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from SCT - Scientific Cutting Tools, Inc.
The 30 ° helical flute thread mills will cut internal and external threads. The helical flute distributes side cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helps to save on tooling costs versus using larger aps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from SCT - Scientific Cutting Tools, Inc.
These straight flute thread mills have a 55 ° thread profile and cut the British Standard Pipe Parallel (BSPP) and the British Standard Pipe Taper (BSPT). [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helps to save on tooling costs versus using larger aps. All tools AlTiN coated for onger tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from SCT - Scientific Cutting Tools, Inc.
These straight flute thread mills have the root radius that is required for the external "UNJ" thread. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helps to save on tooling costs versus using larger taps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from SCT - Scientific Cutting Tools, Inc.
NPT thread mills come in straight, helical and staggered tooth design. They will cut both internal and external threads. NPTF are for dryseal applications. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
MVB SERIES - SPHERICAL BALL END AlTiN COATED, 2 AND 4 FLUTE. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 0.5 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.118
- Cutter Type: Roughing; Finishing; Endmill; Corner Rounding
- Shank: 0.118
from SCT - Scientific Cutting Tools, Inc.
Acme thread mills come in both acme and stub acme configurations. Different tools are available to cut the internal and external thread. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and. increased production output. 3/8 ” and larger avaiable with shank flat. Made from... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .75 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.118
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.236
from SCT - Scientific Cutting Tools, Inc.
Single profile thread mills will cut internal and external threads in a range of thread sizes with minimum cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helix changes along flutes. For radius and contouring part surface. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .030 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.188
from SCT - Scientific Cutting Tools, Inc.
Staggered tooth thread mills will cut internal and external threads. Every other tooth removed in a staggered pattern for reduced side cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helix changes along flutes. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 1.5 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.276
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.236
from SCT - Scientific Cutting Tools, Inc.
Straight flute thread mills come in a large variety of sizes and are crest cutting for internal threads only. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. 3/8 ” and larger avaiable with shank flat. Made from premium... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Chamfer
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.252
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.250
from SCT - Scientific Cutting Tools, Inc.
Long reach thread mills have three teeth and a helical flute that excel in internal deep threads and hard to cut materials. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Melin Tool Company
AlTiN coated for increased tool life or nACo coated for hardened steel. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.189
- Cutter Type: Roughing; Finishing; Endmill; Corner Rounding
- Shank: 0.188
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action and substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 4.00 in AlTiN coated Solid Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Roughing; Endmill
- Cutter: 0.752
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action and substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.000 in AlTiN coated Carbide end mill. Centre Cutting, Dry or Semi-Dry Machining, Heavy Core, Sharp Corners [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.189
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.000 in AlTiN coated Carbide end mill. Centre Cutting, Sharp Corners, Dry or Semi-Dry Machining [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.189
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1.500 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.031
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.500 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.311
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.250 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.126
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3.000 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.126
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3.000 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.126
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1.500 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Square
- Cutter Type: Endmill
- Cutter: 0.063