Finishing Milling Cutters
from Allied Machine & Engineering Corp.
Features and Benefits. Allied's proprietary AM210 ® coating provides a 25-50% increase in tool life over the competition. Allied's Indexable Threadmill Holders are made from a stainless steel that is engineered to dampen vibration during operation. The AccuThread 856 ® Indexable line of... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional; Metric
from Sandvik Coromant Co.
Benefits. Fully adjustable face milling cutter for best surface finishing. Cassette solution with possibility to use both N260.8 inserts and cassettes for CoroMill 245 inserts. Highly-productive finishing cutter for the automotive industry. Features. Large number of inserts. Positive rake. Easy high... [See More]
- Cutter Type: Finishing; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 3.150 to 9.843
from Melin Tool Company
35 ° HELIX END MILLS 3 FLUTE, ALL LENGTHS. Special helix for diffcult to machine materials such as stainless or inconel. Small corner radius for added strength and smoother cutting action. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Superior Tool Service, Inc.
Designed for hi speed machining of aluminum. Available with 2 or 3 flutes, variable helix, variable spiral. We recommend a special Diamondlike carbon coating for the best results. Available uncoated too. Order with no radius, radius or ball radius. Designed for Composite Material Applications. [See More]
- Cutter Type: Finishing; Endmill; Helical Form
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 0.5 mm and is AlTiN coated. [See More]
- Cutter Type: Roughing; Finishing; Endmill; Corner Rounding
- Shank: 0.118
- Cutter: 0.118
- OAL: 1.97
from Promax Tool Company
2 Flute Ball for Aluminum - Series 115. Series 115 2 Flute Ball End Mill for Aluminum. View Speeds and Feeds page. Features: Designed to be a workhourse in milling ALUMINUM and other non-ferrous materials. Standard with ZrN Coating. 40 Degree Helix. Complete with our special Edge Prep to reduce... [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter (metric): 0.4mm. End Type: Square. Flute Length (metric): 2.00mm. Flute Length Type: Long. Max Reach (metric): 4mm. Neck Diameter (metric): .35mm. Number of Flutes: Overall Length (metric): 75mm. Shank Diameter (metric): 3.00mm. Substrate Material: Carbide. Tolerance:... [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from SwiftCARB
Aluminum hyperspeed submicrograin carbide end mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square; Radius (optional feature)
- Units: Fractional; Metric (optional feature)
from Allied Machine & Engineering Corp.
Features. Allied's proprietary AM210 ® coating provides a 25-50% increase in tool life over the competition. AccuThread 856 ® solid carbide threadmills have a thicker core and helical flute which offers increased strength and rigidity when cutting forces are applied. Complete program... [See More]
- Cutter Type: Finishing; Helical Form
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional; Metric
from Sandvik Coromant Co.
Fixed pocket face milling cutter designed for square shoulder cast iron applications demanding fine surface finishes at high feed rates. Benefits. Spring clamp system for quick and easy insert change. Extra close pitch for high productivity in face and square shoulder milling. Close tolerance cutter... [See More]
- Cutter Type: Finishing; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 4.921 to 19.685
from Melin Tool Company
40 ° HELIX END MILLS 2 AND 4 FLUTES. High helix for excellent chip ejection. Higher shearing action. Used for stainless steel and exotic materials. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Superior Tool Service, Inc.
A 4 flute design with a variable helix- variable spiral for chatter free milling. Our design helps with dampening out harmonics, letting you excel in difficult to machine materials and applications. This is a great cutter for hard steel, alloy steels, cast irons, stainless steels and nickel alloys. [See More]
- Cutter Type: Finishing; Endmill; Helical Form
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Cutter Type: Roughing; Finishing; Endmill; Corner Rounding
- Shank: 0.188
- Cutter: 0.189
- OAL: 4.00
from Promax Tool Company
2 Flute Decimal Ball End Mills - Series 331. Series 331 2 Flute Ball Decimal End Mills. Features: Solid Carbide Miniature Decimal End Mills on 1/8 Shanks [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Square. Flute Length: 5/64". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +.000"/-.001". Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
Extra close pitch face milling cutter primarily intended for roughing and semi-finishing of cast iron components. Benefits. Spring-loaded insert for quick and easy insert indexing. High-productive auto roughing cutter. Strong triangular insert. Features. Large number of inserts. 45 degree face mill. [See More]
- Cutter Type: Roughing; Finishing; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 3.150 to 19.685
from Melin Tool Company
40 ° HELIX END MILLS BALL END, 2 AND 4 FLUTES. High helix for excellent chip ejection. For radius and contouring part surfaces. Higher shearing action. Used for stainless steel and exotic materials. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Superior Tool Service, Inc.
A 6 flute end mill designed to cut titanium, heat treated steel and stainless steel. It has a variable helix and variable spiral design for dampening out harmonics. Available coated (TiAlN) or uncoated. Also available: no radius, radius (or chamfer) or ball radius. Designed for Composite Material... [See More]
- Cutter Type: Finishing; Endmill; Helical Form
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Promax Tool Company
2 Flute Decimal Square End Mills - Series 330. Series 330 2 Flute Decimal End Mills. Features: Solid Carbide Miniature Decimal End Mills on 1/8 Shanks [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 3/16". End Type: Square. Flute Length: 5/8". Flute Length Type: Standard. Number of Flutes: Overall Length: 2". Shank Diameter: 3/16". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
Milling cutters for high metal removal and mirror finish. The cutter is designed with enhanced corners to reduce burr formation and frittering of the component. Benefits. Easy to use and high productivity. Light cutting with low power consumption. Close tolerance combined with the wiper insert for... [See More]
- Cutter Type: Roughing; Finishing; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 1.250 to 20.000
from Melin Tool Company
45 ° HELIX END MILLS 5 FLUTE. Five flute design provides excellent cutting performance at faster feed rates. Smooth cutting action in tough to machine material with excellent chip ejection. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Superior Tool Service, Inc.
Our 10 flute design for cutting titanium and stainless steel. This end mill is good for profiling applications. The additional flutes increase tool life and allow higher feed rates. Our variable helix/variable spiral design dampens out harmonics. It is available coated or uncoated, no radius, radius... [See More]
- Cutter Type: Finishing; Endmill; Helical Form
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Promax Tool Company
2 Flute for Aluminum - Series 108. Series 108 2 Flute End Mill for Aluminum. View Speeds and Feeds page. Features: Designed to be a workhourse in milling ALUMINUM and other non-ferrous materials. Standard with ZrN Coating. 40 Degree Helix. Complete with our special Edge Prep to reduce break -in... [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 3/16". End Type: Square. Flute Length: 5/8". Flute Length Type: Standard. Number of Flutes: Overall Length: 2". Shank Diameter: 3/16". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
CoroMill ® 345 is a cost-efficient face mill for high productivity in terms of feed per tooth and metal removal rate. The robust cutter body and shim-protected tip seats give security to the machining process, making the cutter body a good choice if unmanned production is a priority. Benefits. [See More]
- Cutter Type: Roughing; Finishing; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Double
- Cutter: 1.500 to 10.000
from Melin Tool Company
Increased core diameter for added strength. Use for light fnishing cuts. Made from premium ultrafne grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Superior Tool Service, Inc.
Our 20 flute design for inconel, titanium and stainless steel. This has the same variable helix/variable spiral design as the Patriot X. It works best in profiling applications. It is available coated or uncoated, no radius, radius or chamfer in 3/4" to 1-1/4" diameters. Contact us for price and... [See More]
- Cutter Type: Finishing; Endmill; Helical Form
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Promax Tool Company
3 Flute Ball for Stainless Steel - Series 113. Series 113 3 Flute Ball End Mill for Stainless Steel. View Speeds and Feeds page. Features: These tools combine chip clearance and strength for the most difficult slotting and pocketing applications. 35 Degree Helix. Designed with an eccentric relief... [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Helix: 50 Degree. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
The CoroMill ® 172 disc cutter offers a versatile and timesaving solution for milling of high-quality gear profiles. Thanks to the new indexable carbide insert technology and a powerful iLock interface, the component can be machined in flexible non-dedicated machines, such as multi-task machines... [See More]
- Cutter Type: Finishing; Gear Hob
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 2.480 to 19.685
from Melin Tool Company
60 ° HELIX END MILLS 3 FLUTE. Used for stainless and high temperature alloy materials. High helix provides excellent shearing action. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Superior Tool Service, Inc.
A 4 flute rougher/finisher made for steel, designed with a variable helix and variable spiral. Available coated (TiAlN) or uncoated. Also available: no radius, radius (or chamfer) or ball radius. Designed for Composite Material Applications. [See More]
- Cutter Type: Finishing; Endmill; Helical Form
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Promax Tool Company
3 Flute Ball Rougher-Finisher for Stainless Steel - Series 122. Series 122 3 Flute Ball Rougher-Finisher for Stainless Steel. View Speeds and Feeds page. Features: Designed for aggressive slotting and pocket milling. Best in in low and high carbon steels, stainless steel, titanium and high... [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Helix: 50 Degree. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
An innovative indexable insert cutter for productive gear wheel machining. CoroMill ® 176 is a more cost-efficient alternative to regrindable HSS (high speed steel) tools and is designed for gears in the module range 4 to 9. Its ability to reach higher cutting speeds combined with user-friendly... [See More]
- Cutter Type: Finishing; Gear Hob
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 3.937 to 8.268
from Melin Tool Company
Special geometry allows for high chip loads and feed rates. Small corner radius for added strength and smoother cutting action. Excellent for slotting and profling at high speeds. Made from premium submicron grain carbide. Available with ZrN and other coatings. See Coating Information section for... [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Promax Tool Company
3 Flute for Aluminum - Series 109. Series 109 3 Flute End Mill for Aluminum. View Speeds and Feeds page. Features: Designed for Aluminum and Light Alloys finishing applications. 40 Degree Helix. Available with ZrN and AlTiN coatings [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/32". End Type: Square. Flute Length: 1/16". Flute Length Type: Stub/Long Reach/Long Shank. Number of Flutes: Overall Length: 2 1/2". Reach From Tip: 1/4". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +.000"/-.001". Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
Versatile in the widest sense of the word, CoroMill ® 316 can be applied for high feed face milling, slot milling, helical interpolation, shoulder milling, profile milling and chamfer milling of components in all material groups from ISO P to ISO S. CoroMill ® 316 allows machine shops to... [See More]
- Cutter Type: Roughing; Finishing; Endmill; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 0.375 to 1.000
from Melin Tool Company
3 Flute design for lighter finishing cuts. Small corner radius for added strength and smoother cutting action. Made from premium submicron grain carbide. Available with ZrN and other coatings. See Coating Information section for more details. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Promax Tool Company
3 Flute for High Speed Machining of Aluminum - Series 110. Series 110 3 Flute End Mill for High Speed Machining of Aluminum. View Speeds and Feeds page. Features: Special geometry specific for High Speed Machining of Aluminum and Light Alloys. Complete with Radius. Standard with ZrN coating [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.250
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Ball. Flute Length: 5/64". Flute Length Type: Long Flute/Extra Long Reach. Max Reach: .250". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik Coromant Co.
In our comprehensive range of CoroMill ® Plura mills, you will find the best option for your application, whether you need a tool that is optimized for a specific material or one that performs well in many materials. The range of tools includes high-performance solutions for high-speed... [See More]
- Cutter Type: Roughing; Finishing; Endmill; Thread Mill (optional feature)
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature); Radius (optional feature)
- Units: Fractional (optional feature); Metric
from Melin Tool Company
Short flute length with reduced neck for maximum rigidity. nACo coated for durability. Use air mist coolant for materials harder than RC40. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from WhizCut of Sweden AB
WhizCut will change the way thread mills are used today by introducing WhizThrill. The WhizThrill deburring solid carbide thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has... [See More]
- Cutter Type: Finishing; Thread Mill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Promax Tool Company
3 Flute for Stainless Steel & High Temperature Alloys - Series 106. Series 106 3 Flute End Mill for Stainless Steel. Features: These tools combine chip clearance and strength for the most difficult slotting and pocketing applications. 35 Degree Helix. Designed with an eccentric relief creating a 25%... [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Square. Flute Length: 5/64". Flute Length Type: Long Flute/Extra Long Reach. Max Reach: .250". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
CoroTurn ® XS contains precision tools for small part machining, suitable for internal turning, grooving and threading applications. Its unique clamping system makes it reliable and easy to use. Benefits. Reliable system with focus on holes smaller than 12 mm (0.472 inch). For turning into... [See More]
- Cutter Type: Finishing; Endmill; Thread Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Shank: 0.157 to 1.000
from Melin Tool Company
MVB SERIES - SPHERICAL BALL END AlTiN COATED, 2 AND 4 FLUTE. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Promax Tool Company
3 Flute Rougher-Finisher for Aluminum - Series 119. Series 119 3 Flute Rougher-Finisher for Aluminum. View Speeds and Feeds page. Features: Designend to improve performance in profiling and pocket rougher-finishing applications. Best in Aluminum and and light alloys. Eccentric relieved for a 25%... [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/32". End Type: Ball. Flute Length: 1/16". Flute Length Type: Extra Long Reach Stub. Max Reach: .500". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik Coromant Co.
The CoroMill ® 216F cutter is used for finish milling of a range of materials used for die and mold-making, as well as for manufacturing of turbine blades within the aerospace industry. Its sharp edges cut hardened steel up to HRC 60 along with stainless steel, grey or nodular cast iron, and... [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 0.315 to 1.260
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and. increased production output. 3/8 ” and larger avaiable with shank flat. Made from... [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Promax Tool Company
3 Flute Rougher-Finisher for Stainless Steel - Series 117. Series 117 3 Flute Rougher-Finisher for Stainless Steel. View Speeds and Feeds page. Features: Designed for aggressive slotting and pocket milling. Best in in low and high carbon steels, stainless steel, titanium and high temperature alloys. [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Sandvik Coromant Co.
CoroMill ® 300 is a positive round insert concept for a broad range of operations such as face milling, pocketing, and profiling. Light cutting action allows for smooth entries and exits and for vibration-free use of extended tool setups. The positive concept is used for machines with high and... [See More]
- Cutter Type: Roughing; Finishing; Endmill; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 0.375 to 8.000
from Melin Tool Company
Helix changes along flutes. For radius and contouring part surface. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Promax Tool Company
4 Flute Decimal Ball End Mills - Series 333. Series 333 4 Flute Decimal Ball End Mills. View Speeds and Feeds page. Features: Solid Carbide Miniature Decimal End Mills on 1/8 Shanks [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik Coromant Co.
CoroMill ® 290 is a general-purpose square shoulder milling cutter that provides an economical solution with four cutting edges per insert. It is also suitable for face milling when workpiece fixturing limits the approach for machining. Generally, it provides an economical solution with four... [See More]
- Cutter Type: Finishing; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 2.000 to 10.000
from Melin Tool Company
Helix changes along flutes. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Promax Tool Company
4 Flute Decimal Square End Mills - Series 332. Series 332 4 Flute Decimal End Mills. View Speeds and Feeds page. Features: Solid Carbide Miniature Decimal End Mills on 1/8 Shanks [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik Coromant Co.
CoroMill ® 490 gives true 90-degree cuts without sharp steps. It uses four-edge inserts with light cutting action, a result of innovative insert geometry in combination with high-performance grades. Since the tool produces a smooth profile, the need for finishing is efficiently reduced. [See More]
- Cutter Type: Finishing; Endmill; Face Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 0.756 to 1.250
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. 3/8 ” and larger avaiable with shank flat. Made from premium... [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Chamfer
- Units: Fractional
from Promax Tool Company
4 Flute for Stainless Steels & Alloys - Series 111. Series 111 4 Flute End Mills for Steels & Alloys. View Speeds and Feeds page. Features: Finishing End Mill for low & high carbon steels, stainless steeel & high temperature alloys. Designed with eccentric relief, creating a 25% stronger cutting... [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Sandvik Coromant Co.
CoroThread ® 266 is designed with an iLock interface to combat the extreme forces placed upon the insert in the threading operations. The tool guarantees excellent insert stability for ultimate accuracy, surface finish and product consistency. Machining benefits. Reduced machine- and downtime. [See More]
- Cutter Type: Finishing; Thread Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- English Pitch: 0 to 3
from Melin Tool Company
Can remove material at high roughing speeds while producing finishes close to conventional end mills, due to the chip-breaker form. Made from premium submicron grain carbide. [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Promax Tool Company
4 Flute Rougher-Finisher for All Material Types - Series 120. Series 120 4 Flute Rougher-Finisher for All Material Types. View Speeds and Feeds page. Features: Bridges the gap between full roughing and finishing applications. Maintains an exceptional part surface finish. Relieves tool pressure... [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Sandvik Coromant Co.
The growing use of medical bone screws, implants and other micro-components creates a need for techniques that produce special thread forms quickly and at high tolerances. CoroMill ® 325 thread whirling inserts and holders from Sandvik Coromant meet this need for a large number of sliding head... [See More]
- Cutter Type: Finishing; Thread Mill
- Units: Fractional (optional feature); Metric
- Cutting Ends: Single
- Cutter: 1.102 to 1.654
from Melin Tool Company
A free cutting roughing end mill which will produce a smooth finish. 40 ° helix with eccentric relief. Small corner radius for strength. Made from premium submicron grain carbide. [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Promax Tool Company
5 Flute for Super Finishing - Series 112. Series 112 5 Flute End Mill for Super Finishing. View Speeds and Feeds page. Features: High performance end mills. Designed for maximum production capabilitie. Eccentric relieved for a smoother running end mill when profiling at maximum speeds. Engineered to... [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.125
from Melin Tool Company
Can provide uniform finish on corners. Radius is form relieved. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Double
- Geometry: Corner Rounding
- Units: Fractional
from Promax Tool Company
5 Flute Rougher-Finisher for Steels & High Strength Alloys - Series 121. Series 121 5 Flute Rougher-Finisher for Steels & High Strength Alloys. View Speeds and Feeds page. Features: Bridges the gap between full roughing and finishing applications. Maintains an exceptional part surface finish. [See More]
- Cutter Type: Roughing; Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.750
from Melin Tool Company
Can provide uniform finish on corners. Radius is form relieved. Made from premium submicron grain carbide. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Corner Rounding
- Units: Fractional
from Promax Tool Company
7 Flute for High Speed Machining of High Tech Materials - Series 160. Series 160 7 Flute End Mill for High Speed Finishing of High Tech Materials. Features: Special geometry for High Speed Finishing. Designed for use in Stainless Steel and Nickle based super Alloys. Unequal indexed to relieve... [See More]
- Cutter Type: Finishing; Endmill
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.250
from Melin Tool Company
Can be used for drilling, slotting, chamfering, and profle milling. Available in 60, 82, and 90 degree points. Made from premium submicron grain carbide. Also available in cobalt HSS (M42) material. [See More]
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
- Geometry: Chamfer
- Units: Fractional