Coated Milling Cutters
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
Corner Rounding End Mills have three flutes and are double ended to provide maximum value. The cutter diameter and the cut depth are held to ±0.001 inch tolerance to provide ease of set-up. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Endmill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/32". Flute Length: 3/32". Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Type: End Mill [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Regular Length - TiALN * 10% Cobalt * Micro Grain [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Cutting Ends: Single
- Cutter Type: Endmill
- Units: Fractional
from Contour360º
Designed specifically for aluminum and non-ferrous materials. Reduce cycle time - one tool for roughing and finishing. Promotes dynamic chip flow at high velocity. [See More]
- Coating: Coated; Zirconium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
2 and 4 Flute Square End and Ball Nose [See More]
- Coating: Coated; Diamond
- Geometry: Square (optional feature); Ballnose (optional feature)
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Stanley Engineered Fastening - Spiralock
The Spiralock thread form tools are also available in Thread Milling Cutters, for jobs where larger thread diameters are required. These tools will save handling, set-up and machining time by threading right in your machining center with improved thread quality. Spiralock Thread Milling Cutters can... [See More]
- Coating: Coated; Titanium Nitride (optional feature); Titanium Carbonitride (optional feature)
- Geometry: Radius
- Cutter Type: Shell Mill; Thread Mill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length TiAlN coated Carbide end mill. [See More]
- Coating: Coated; Titanium Aluminum Nitride; TiAlN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.047
from SwiftCARB
Six flute finishing end mills, single end- 45 ° helix [See More]
- Coating: Coated; Titanium Carbonitride (optional feature); Aluminum Titanium Nitride (optional feature)
- Geometry: Square; Radius (optional feature)
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Melin Tool Company
Helps to save on tooling costs versus using larger taps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
The 15 ° helical flute thread mills are non-crest cutting for internal threads only. The helical flute distributes the side cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional; Metric
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Square. Flute Length: 5/64". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +.000"/-.001". Type: End Mill [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Regular Length - TiALN * 10% Cobalt * Micro Grain [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Cutting Ends: Single
- Cutter Type: Endmill
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
3- and 4-Flute Long Shank [See More]
- Coating: Coated; Diamond
- Geometry: Square (optional feature); Ballnose (optional feature)
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2 in Extra Length TiAlN coated Carbide end mill. [See More]
- Coating: Coated; Titanium Aluminum Nitride; TiAlN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from Melin Tool Company
Helps to save on tooling costs versus using larger taps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 2 INCH OVERALL LENGTH. 5/8 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 3/16 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 3 FLUTE(S). FAST SPIRAL FLUTE TYPE. 3/16 INCH CUTTER DIAMETER. 3/16 CUTTER DIAMETER - FRACTIONAL. .1875 CUTTER DIAMETER - DECIMAL. 60 HELIX... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
The 30 ° helical flute thread mills will cut internal and external threads. The helical flute distributes side cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TiALN. Diameter: 1/32". End Type: Ball. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Type: End Mill [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from KEO Cutters
3-Flute Decimal Extra Long Reach [See More]
- Coating: Coated; Diamond
- Geometry: Square (optional feature); Ballnose (optional feature)
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length TiCN coated Carbide end mill. [See More]
- Coating: Coated; Titanium Carbonitride; TiCN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.063
from Melin Tool Company
Helps to save on tooling costs versus using larger aps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
These straight flute thread mills have a 55 ° thread profile and cut the British Standard Pipe Parallel (BSPP) and the British Standard Pipe Taper (BSPT). [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TiALN. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Type: End Mill [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
3-Flute Extra Reach Stub Ball Nose [See More]
- Coating: Coated; Diamond
- Geometry: Ballnose
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length TiCN coated Carbide end mill. [See More]
- Coating: Coated; Titanium Carbonitride; TiCN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from Melin Tool Company
Helps to save on tooling costs versus using larger aps. All tools AlTiN coated for onger tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 3 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
These straight flute thread mills have the root radius that is required for the external "UNJ" thread. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Titanium Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
3-Flute Long Reach Single-End High Performance [See More]
- Coating: Coated; Diamond
- Geometry: Square (optional feature); Ballnose (optional feature)
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 50.0 mm Standard Length TiAlN coated Carbide end mill. [See More]
- Coating: Coated; Titanium Aluminum Nitride; TiAlN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.157
from Melin Tool Company
Helps to save on tooling costs versus using larger taps. All tools AlTiN coated for longer tool life. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Thread Mill
- Cutting Ends: Single
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
NPT thread mills come in straight, helical and staggered tooth design. They will cut both internal and external threads. NPTF are for dryseal applications. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 3/16". End Type: Square. Flute Length: 5/8". Flute Length Type: Standard. Number of Flutes: Overall Length: 2". Shank Diameter: 3/16". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Titanium Nitride
- Geometry: Square
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
3-Flute Stub/Long Reach/Long Shank [See More]
- Coating: Coated; Diamond
- Geometry: Square (optional feature); Ballnose (optional feature)
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 50.0 mm Standard Length Alumastar coated Carbide end mill. [See More]
- Coating: Coated; Alumastar
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.157
from Melin Tool Company
Increased core diameter for added strength. Use for light fnishing cuts. Made from premium ultrafne grain carbide. [See More]
- Coating: Coated; nACo©
- Geometry: Radius
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
Acme thread mills come in both acme and stub acme configurations. Different tools are available to cut the internal and external thread. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Helix: 50 Degree. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Titanium Nitride
- Geometry: Square
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
Extra Reach Carbide Ball Nose [See More]
- Coating: Coated; Diamond
- Geometry: Ballnose
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.031
from Melin Tool Company
High performance CVD diamond coated tools are used to machine graphite and other non-ferrous materials. Typically extend tool life by 10 to 25 times over uncoated tools when cutting various non-metallic materials. A special carbide substrate is used to insure proper diamond adhesion to the tool. [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
Single profile thread mills will cut internal and external threads in a range of thread sizes with minimum cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 25/64". End Type: Square. Flute Length: 7/8". Flute Length Type: Standard. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 7/16". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Titanium Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from KEO Cutters
Extra Reach Carbide Square End [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.031
from Melin Tool Company
Short flute length with reduced neck for maximum rigidity. nACo coated for durability. Use air mist coolant for materials harder than RC40. Made from premium submicron grain carbide. [See More]
- Coating: Coated; nACo©
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
Staggered tooth thread mills will cut internal and external threads. Every other tooth removed in a staggered pattern for reduced side cutting pressure. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing; Endmill
- Cutting Ends: Single
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from Melin Tool Company
MVB SERIES - SPHERICAL BALL END AlTiN COATED, 2 AND 4 FLUTE. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Units: Fractional
from SCT - Scientific Cutting Tools, Inc.
Straight flute thread mills come in a large variety of sizes and are crest cutting for internal threads only. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/32". End Type: Square. Flute Length: 1/16". Flute Length Type: Stub/Long Reach/Long Shank. Number of Flutes: Overall Length: 2 1/2". Reach From Tip: 1/4". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +.000"/-.001". Type: End Mill [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and. increased production output. 3/8 ” and larger avaiable with shank flat. Made from... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from SCT - Scientific Cutting Tools, Inc.
Long reach thread mills have three teeth and a helical flute that excel in internal deep threads and hard to cut materials. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Cutter Type: Thread Mill
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TiALN. Diameter: 1/32". End Type: Square. Flute Length Type: Stub. Length of Cut: 1/16". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Tolerance: +0 - .001. Type: End Mill [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square; Radius (optional feature); Chamfer (optional feature)
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from Melin Tool Company
Helix changes along flutes. For radius and contouring part surface. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Cutting Edge Technologies, Inc.
Coating: TiALN. Diameter: 1/32". End Type: Square. Flute Length Type: Standard. Helix: 35 Degrees. Length of Cut: 3/32". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Titanium Aluminum Nitride
- Geometry: Square; Radius (optional feature); Chamfer (optional feature)
- Cutter Type: Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutter: 0.126
from Melin Tool Company
Helix changes along flutes. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Ball. Flute Length: 5/64". Flute Length Type: Long Flute/Extra Long Reach. Max Reach: .250". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Diamond
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Roughing (optional feature); Finishing (optional feature); Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is Alumastar coated. [See More]
- Coating: Coated; Alumastar
- Cutter: 0.252
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.250
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. 3/8 ” and larger avaiable with shank flat. Made from premium... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Chamfer
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Square. Flute Length: 5/64". Flute Length Type: Long Flute/Extra Long Reach. Max Reach: .250". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 0.5 mm and is AlCrN coated. [See More]
- Coating: Coated; AlCrN
- Cutter: 0.236
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.236
from Melin Tool Company
PVD amorphous diamond coating for machining graphite and other non-ferrous materials. Cost effective alternative to CVD Diamond. Hardness GPa: 60-90 [See More]
- Coating: Coated; Diamond
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/32". End Type: Ball. Flute Length: 1/16". Flute Length Type: Extra Long Reach Stub. Max Reach: .500". Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Coating: Coated; Diamond
- Geometry: Ballnose
- Cutter Type: Finishing; Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 0.5 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.118
- Cutter Type: Roughing; Finishing; Endmill; Corner Rounding
- Shank: 0.118
from Melin Tool Company
Short flute length with reduced neck for maximum rigidity. nACo coated for durability. Use air mist coolant for materials harder than RC40. Made from premium submicron grain carbide. [See More]
- Coating: Coated; nACo©
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 0.2 mm and is TiAlN coated. [See More]
- Coating: Coated; Titanium Aluminum Nitride; TiAlN
- Cutter: 0.118
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.118
from Melin Tool Company
nACo coated for increased tool life. For material over 50Rc. Increased core diameter for added strength. Use for light finishing cuts. Made from premium ultrafine grain carbide. [See More]
- Coating: Coated; nACo©
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is TiAlN coated. [See More]
- Coating: Coated; Titanium Aluminum Nitride; TiAlN
- Cutter: 0.126
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.125
from Melin Tool Company
AlTiN coated for increased tool life or nACo coated for hardened steel. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Ballnose
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .75 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.118
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.236
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action and substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .030 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.188
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action and substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 1.5 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.276
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.236
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Square
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 1.0 mm and is AlCrN coated. [See More]
- Coating: Coated; AlCrN
- Cutter: 0.472
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.472
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Geometry: Radius
- Cutter Type: Endmill
- Cutting Ends: Single
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.252
- Cutter Type: Endmill; Corner Rounding
- Shank: 0.250
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.189
- Cutter Type: Roughing; Finishing; Endmill; Corner Rounding
- Shank: 0.188
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . GAR-14210 [See More]
- Coating: Coated; Balinit X-Treme
- Cutter: 0.031
- Cutter Type: Endmill
- Shank: 0.250
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . GAR-14260 [See More]
- Coating: Coated; Balinit X-Treme
- Cutter: 0.252
- Cutter Type: Endmill
- Shank: 0.250